Result: Boat Loading Guide

Thank you for providing the photo of your boat and trailer and the bow guide rollers you have just installed. | I have a 395vs ranger just bought the rollers on the front are they just for guides or can you...

I am considering installing these roller guides on my Paddle King pontoon boat trailer. The trailer is a lightweight build and carries my 13foot pontoon boat. | I am considering installing...

| The Yates Side Guide Roller for Boat Trailers - Heavy-Duty Rubber - 12" Long - 1/2" Shaft # YR12243-4P is compatible with the CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair # CE10211G. |

Normally, you will see keel rollers near the back of a boat trailer to help guide it on. But it is possible to place a roller else where on the trailer. | I have no keel roller on my 2004 Zieman boat trailer...

From the flat portion of the plate to the center of the bolt holes is going to be right at 3" on the One Piece Bracket for 12" Roller for Boat Trailers item # 408300. You'll also need the Roller Shaft 13" x 5/8" item # CE10727A and a Guide Roller like item # YR12243-5. |

It has two bunks only to load the boat, along with the front roller bumper stopper. | I have an 18 foot Alumacraft boat with a EZ Loader trailer. The trailer is a pain. It has two bunks only to load the boat,...

In order to convert your Malone trailer from a roof rack on wheels to a full on boat trailer with roller guide-on's, I recommend using the CE Smith Roller Bunks for Boat Trailers part # CE27700 and CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks part # CE10003G-4. |

2” wide 3” long galvanized u bolts Need them to secure guide on posts to boat trailer | Do u have any of these available for purchase? 2” wide 3” long galvanized u bolts Need them to secure guide on posts to...

I have a broken wheel stud on a load rite double axle boat trailer. The threads are 1/2-20, splines are 5/8 wide and 22 per inch, spline length is 5/8, the base length is 11/16, I dont have the thread length since this one is broken. |

I recommend using the Trailer Hub Wheel Stud item # 7-122 to replace the wheel studs on your Load Rite boat trailer. These are a 1/2" diameter and 2" long. | Im in need of replacement wheel lug studs. My existing...

I just got a 1988 Cox tandem axle boat trailer with boat, but it is not equipped with brakes. | I just got a 1988 Cox tandem axle boat trailer with boat, but it is not equipped with brakes. The four hole backing...

You will need to use that as a guide for how to attach the fenders with the brackets. | TRAILER FENDER MOUNTING HOLES AND BRACKET HOLES DONT MATCH UP. I ORDERED FENDERS FU008559 AND BRACKETS PF775-BKT-2 FOR THE LEFT AND RIGHT...

The best thing for you to do is to compare the dimensions and mounting dimensions to the ones on your Load Rite boat trailer initially. The distance between the mounting slots is 35 inches measured from the inside and 41-1/2 inches measured from the outside of the slot. |

Hello, I am looking at replacing the side guide rollers on my trailer. The current rollers are 12x 2-1/2inch w/ 1/2inch Shaft. I found the correct replacement roller on your site from Yates along with a top cap but I cannot find the right length...

Hi, Need to new U-bolts for my boat trailer. GVWR= 4,650 lbs. Max Load Carrying capacity= 3,500. | Hi, Need to new U-bolts for my boat trailer. GVWR= 4,650 lbs. Max Load Carrying capacity= 3,500. Tandem....

Do you carry a tire and galvanized blade style wheel combo for a 2012 Trailstar boat trailer? Tire size is ST 175/80 D13 load range C. | 1. Do you carry a tire and galvanized blade style wheel combo for a 2012...

Can a boat square axle 3500 rating be used on a travel trailer round camber axle same 3500 lb rating.Seems like they could be interchanged.After all boats are sometimes heavier and get loaded too. |

I purchased a used boat trailer for my existing boat. The trailer is rated for a 6000 pound load, and appears to have 3500 pound axles. | I purchased a used boat trailer for my existing boat....

Question. Our new tandem axle boat trailer axles are out of alignment. The front axle is out about 3/8” on the diagonals measured from center of ball hitch. | Question. Our new tandem axle boat trailer axles are out of alignment....

I can fabricate whatever I need but im not sure how high it should be. the boat and trailer weigh 3200lbs and the tandem im going to is 5k. | So I am in in the process of upgrading my single axle boat trailer into a tandem....

replacing grease seals on 1986 ez load boat trailer. old trailer is dbl axle - for 27 ft boat. | replacing grease seals on 1986 ez load boat trailer. old trailer is dbl axle - for 27 ft...

I have a single axle boat trailer with an 18’ bow rider on it. I mainly pull it multiple times back and forth two one of two lake. | I have a single axle boat trailer with an 18’ bow rider on it. I mainly pull it multiple times...

I have a 1998 Prestige boat trailer for a 20 foot Crownline boat that i want to replace the surge brakes on to electric. | I have a 1998 Prestige boat trailer for a 20 foot Crownline boat that i want to replace...

2800 lbs max load philips/dexter axle I have the above axle. | 2800 lbs max load philips/dexter axle I have the above axle. Dont know what type trailer its off of or year.The backing plate is welded to axle. 10 by 1 1/2 shoes....