Height of the Shaft Holes from the Plate on the One Piece Bracket for 12" Roller for Boat Trailers

Updated 01/19/2026 | Published 01/15/2026

Products Featured in This Question

One Piece Bracket for 12" Roller for Boat Trailers

(17)

$27.43

Roller Shaft with Cap Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 13" x 5/8"

(825)

$18.32

Yates Side Guide Roller for Boat Trailers - Heavy-Duty Rubber - 12" Long - 5/8" Shaft

(370)

$21.34

Question:

I would like to use this on a drive on floating boat lift, with the large plate bolting in a horizontal position to the structure. Can you tell me what the height of the hole will be in this position, measuring the distance from the flat plate to the centerline of the shaft hole?

asked by: Chad

Expert Reply:

Hey Chad. From the flat portion of the plate to the center of the bolt holes is going to be right at 3" on the One Piece Bracket for 12" Roller for Boat Trailers item # 408300. You'll also need the Roller Shaft 13" x 5/8" item # CE10727A and a Guide Roller like item # YR12243-5.

What kind of boat do you have?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H