Replacement 1/2"-20 Wheel Stud for a Load Rite Boat Trailer

Updated 11/02/2017 | Published 11/01/2017

Products Featured in This Question

Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1

(115)

$10.74

Chrome Trailer Wheel Lug Nut - 1/2" (Each)

(1022)

$6.24

Trailer Hub Wheel Stud, Drive-In, 1/2" x 2.24" - Qty 1

(28)

$11.23

CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1

(437)

$5.83

Question:

I have a broken wheel stud on a load rite double axle boat trailer. The threads are 1/2-20, splines are 5/8 wide and 22 per inch, spline length is 5/8, the base length is 11/16, I dont have the thread length since this one is broken. Can you recommend a replacement?

asked by: Joel S

Expert Reply:

In order to replace the broken wheel stud on your Load Rite boat trailer, I recommend using the Trailer Hub Wheel Stud part # 7-122 for a 2" long stud or the Trailer Hub Wheel Stud part # 7-150 for a 2-3/32" long stud. You can measure your remaining studs to determine the correct length. The dimension for each of these replacement wheel studs can be found on the product page.

If you also need a new lug nut then you will want to use the CE Smith Trailer Wheel Lug Nut part # CE11051 for conned shaped or the Chrome Trailer Wheel Lug Nut part # 12CLN for acorn shaped.

expert reply by: Conner L