Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The closest size tire that we have to the Tow-Master F65-14ST that you referenced is a size 205/75R14. Since these tires are not exactly the same size you will either need to find a direct Tow-Master F65-14ST for a spare or I recommend that you…
view full answer...The closest grease seal we have available to the dimensions you provided is the Redline #10-40. This seal features the same 1.938 inner diameter but a slightly smaller 2.510 outer diameter. This may work as a replacement on your hubs but we do not…
view full answer...Since you're replacing your rooftop unit on your Dometic AC system with the Furrion Chill Replacement RV Air Conditioner for Dometic Brisk Setup #FR42PV your current thermostat will work the same as before. This unit simply plugs into your…
view full answer...The Triangular Equalizer #TREQ310 is a replacement for the Dexter 13-10 on your 2022 Nash 23D travel trailer. You should consider upgrading to the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR. These will pair with either the 2-1/4"…
view full answer...Adjusting self-adjusting brakes is going to be a lot more difficult than manual adjusting ones due to the starwheel and how the self adjusting cable is attached. The procedure listed in Connor's answer is what has been relayed to us by Lippert as…
view full answer...Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.
view full answer...The Dexter part number 023-357-00 is a 12x2 electric brake assembly. The correct RH assembly to use to replace what you have would be the part #23-459 and for the LH assembly you would want the part #23-458 if you have 6K axles. If you have 7k axles…
view full answer...I do have an option for you but we do not carry the exact replacement you are looking for. For your trailer, I recommend using the Dexter Equalizers part #13-140-3. These equalizers are almost an exact replacement for the ones you currently have. All…
view full answer...If you have the module part #LC175226 the correct replacement touch panel would be the #LC421484.
view full answer...It really just depends on what you are looking to get out of the bushings. Bronze bushings, like part #K71-291-00, will last longer but are more noisy and it is recommended to use wet bolts like part #126B2 to keep them lubricated. Nylon bushings,…
view full answer...The correct replacement equalizer for your 13-104 is TruRyde Curved Equalizer #TREQ104. If you need the kit, you can use the Redline Tandem-Axle Trailer Equalizer Kit #AP233. The upgrade we offer for the 13-104 equalizer is the Dexter E-Z Flex Heavy…
view full answer...You can find the Dexter Heavy-Duty Tandem Axle Suspension Kit for 1-3/4" Wide Double Eye Springs listed as part #K71-359-00 on our site.
view full answer...Filter Your Search
Contact and Help