Search: rvb3775   >   Trailer Jack   >   !Sidewind Jack  x   >  

I do have an option for you but the Head Assembly for B&W Patriot 5th Wheel Trailer Hitch part #BWRVC3200 will not work with the Base for B&W Companion Slider 5th Wheel Trailer Hitch part #BWRVB3405 or part #BWRVB3500. The B&W…

According to our FAQ on slipper springs, linked for referenced, the torque specs are as follows: Torque Ratings 1/2 inch Bolts: 45 ft/lbs - 70 ft/lbs 9/16 inch Bolts: 65 ft/lbs - 95 ft/lbs 5/8 inch Bolts: 100 ft/lbs - 120 ft/lbs The Replacement…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

According to my contact at Firestone, their rear axle air bag kit F2535 is not a fit for your 2017 Ford F-250 diesel 4X4 but we do have options. Air Lift offers a confirmed fit in a 5th-wheel-compatible rear air bag kit, part #AL57399, which provides…

It sounds like you are pretty close to the correct height for the Air Lift kit part #AL57399 to fit without a spacer as it sounds like the block lift you have was a body lift. Either way though Air Lift recommends installing the brackets of their…

Yes, the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter part #RP94716-61301 will work with any brand of gooseneck hitch as long as they have a 2-5/16" hitch ball like the B&W Turnoverball Underbed Gooseneck Trailer Hitch…

The O-Ring comes as part of the Redline #RG04-300 assembly including the cap, plug, and o-ring. We do not carry a special wrench as most users simply put a rag over the cap and lossen with channel lock plyers. I have included a link to this product…

The Dico 15638 is a 10 x 2-1/4 inch brake drum/hub that used kind of an oddball bearing setup, inner bearing LM67048 and 3/4 outer bearing LM11949. None of the hub/drums we currently carry are compatible with this bearing set. If the drums are still…

I looked up your Dexter 8-222 Hub and was able to find the inner and outer bearing numbers as well as the grease seal used. It looks like this particular hub was designed for mobile homes and these, for the most part, have more unique bearings and…

I do have a solution, but unfortunately we do not have a 3,500 lb axle that matches the length of your current axle. What I can offer is the Timbren Axle-Less Trailer Suspension System #ASR3500S05. This system will fit any frame width so it will work…

Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.

We have previously confirmed with Dometic (who own Atwood now) that the Atwood 91349 that you've got can be replaced by the Replacement Control Panel for Atwood Water Heaters #AT91367 you were looking at.