Result: blaylock

Hi Richi! The etrailer Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased #AKIHUB-550-35-EZ-K you asked this question from fits all your specifications. It works with 3,500 pound axles (it uses the standard #L44649 and…

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

Hey Eddie, thanks for the pictures. From seeing that I can tell you have a 3,500 lb axle and the correct replacement hub would be the part #AKIHUB-545-35-G-EZ-K that you referenced which comes with new bearings and seal.

I did some research on the Bargman L-300 lock that you mentioned in your question, and it appears that these have not been made in a long time. Specific replacement parts for this particular line are no longer produced. If you are needing to replace…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The Bargman L-300 lock is no longer manufactured so a direct replacement lock is not available. The Redline Full Size Locking Steel Flush Door Latch #L3980 that you referenced has a similar handle lock design and should work nicely as a replacement.…

It looks like your current brakes use the offset 4-bolt mounting pattern. Take a look at the picture I have included that shows the mounting pattern of Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange - 12" - Left/Right Hand Assemblies - 6K…

The opening width of the S-Hook on the Curt Single Hook, Coiled Safety Cables #C80176 referenced in your question is 3/4 inches and are not big enough to fit around the thicker side of the Curt Safety Chain Loops #C60618. These have a weight capacity…

It really depends on your setup, if the safety chain loops on your tow vehicle are spaced far apart then you will need more slack to make a tight turn then if they were closer together. What I would recommend you do is connect your trailer to your…

Hi Pedro; nothing comes back under that part number. Based on the information you provided I'm guessing you need the Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles #23-105-106-09. These are 12" x 2"…

I reached out to Dexter and found that your 6,000 lb Dexter Axle has a 5 bolt brake flange pattern. The brake assembly you have is designed for a 4 bolt and 5 bolt brake flange, which is why you are seeing 9 holes. The brakes you are looking for are…

It is possible to move a trailer by just attaching to it's safety cables. Most people would avoid the method you described as the trailer will slam into the back of the tow vehicle while stopping. Basically it wouldn't be a thief's ideal…