Replacement Bargman L-300 Locking Latch

Updated 10/22/2021 | Published 04/27/2017

Question:

I was curious as to which latch would replace a Bargman L-300? Thanks,

asked by: Jason

Expert Reply:

I did some research on the Bargman L-300 lock that you mentioned in your question, and it appears that these have not been made in a long time. Specific replacement parts for this particular line are no longer produced.

If you are needing to replace the lock, I recommend looking at a similar design handle lock like the Redline Full Size Locking Steel Flush Door Latch # L3980. This will mount in a 3-3/8 inch x 4-5/8 inch hole and will work on doors up to 1-1/16 inches thick.

I have attached a short demonstration video on this lock as well as a link that will take you to our available selection of locking latches for you to look through.

expert reply by: Chris R

Dale B.

8/8/2020

This lock has no mechanism for the inside of the door. How, then, can it be used to replace an L300?

Jon G.

8/18/2020

Chris didn't say that this is an exact replacement. He said that this is a similar design to the L-300.

Chris

10/10/2021

@JonG it is a baggage door lock in the video suggested for an entry door lock? I am also searching to replace the old Bargman L-300, with no options available for any modern replacement.

Les D.

10/22/2021

@Chris It sounds like you want an entry door - not a baggage door. The Bargman L-300 has not been made for a long time and is no longer available anywhere that I know of. If you would like to send me the door latch cut out measurements and door thickness measurement, I can look and see if I can find something that will work, or only require a little adjustment to the cut out opening. In the mean time, take a look at the link below to see the latches we have. This is what I will pick from.

Helpful Links

dept-pg-trailer_door_latch-pt-flush_latch.aspx