!Pleasure Way  x   >   !Weigh Safe  x   >   !Paradigm Fifth Wheel  x   >   Patriot Hitches  x   >  

I lifted my truck with the LockNRoll and now need to the vehicle side mount. This is considerably less that their product, I can keep my existing straight mount and i like how it adjusts the as needed vs an adjustable attachment to a fixed...

I recently purchased the Maxxtow Adj Tri-ball Mount - 2inch Hitch - 5.75inch /rise, however, the distance from the pinhole to the shank is not long enough to clear the bumper. This products description said it had a long shank, but was even...

I installed my hitch on my 2015 venza. I have 10.5 inches of clearance un-weighted . I will be installing a rack and 2 bikes next. Seems low. ? | The 2015 Venza doesn't sit particularly high so 10-1/2" of clearance with the # 75663 installed...

What is the distance from the center of the pin hole to the back of the angle bracket please? I need the hitch extended beyond my bumper on my 2015 Itasca Sunstar to add a platform for my daughter’s ActionTrac wheel chair, which weighs a little...

I am looking for a two bike hitch mount bike rack that will keep the bikes low to the ground. I have a 2017 F350 and installed an aftermarket bumper which has an integrated hitch reciever 2 inch . Because it is part of the bumper and not...

I am carrying a stand up jet ski on a hitch carrier at the back of my truck. I want to use a riser to raise it a bit, to avoid potential dragging when going in/out of driveways. A /riser like this would work, but it says it is for flat towing...

My truck has a sizeable lift, so to make it possible to get a dirtbike up the ramp I would need to have the receiver much lower, 8-10 inches. I see the Patriot adapter Item # PH54FR. Would something like this be safe to use with this? Would...

Hi, I have a 2018 dodge challenger I already installed a hitch but now I need a riser of at least 10. I am looking at this one item # ph67sr. My only concern is if it will clear past the bumper on my car. | You will want to measure the distance...

Do you sell the 10,000 lb Verizon of this hitch? I dont see it on your website | The Patriot Hitches Adjustable Drop Hitch Receiver Adapter # PH67SR in the 7,000lb capacity is the only capacity we currently carry. For 10,000lbs from Patriot...

Hi, We have a 25 foot class c motor coach with a two inch hitch. Our coach has a slide out the back so we need a two bike tilt away rack that is tough enough to hold up. We would like to tilt with bikes on so not sure if we should use a hang...

Specs say the Patriot 11inch adjustable rise/ receiver, part# PH54FR, is rated for 700 tongue and 7000 gross weight, but it IS NOT recommended for flat towing. Specs for the Blue-Ox fixed 10inch rise/ receiver, part# BX88132, is rated for 400...

I need a hitch that will at least 6inch and then raise up to a 1 or 2inch . Its for flat towing a vehicle behind my motorhome. The Patriot hitch looks perfect but it says its not for use in flat towing or tow bars. Do you have such a product...

Are Patriot hitches made in the USA? | The Patriot Hitch adjustable drop hitches like the # PH54FR you're asking about are proudly made in the USA, in Ohio. I've linked to a product demonstration video featuring the # PH54FR drop hitch. |

interested in a hitch adapter to lower the tow angle by 4-6. I think the dual hitch receiver adapter item #RM-077-6 would work but I dont need two receivers. Do you have a part that lowers with just one receiver? | I have the perfect thing!...

101001 Patriot Hitches General Rod-Ops Adjustable Rise/ hitch. In the video the guy mentioned a chart on your site that shows the decrease in towable and tongue weight this hitch can handle once you adjust it. But I cannot find this chart. |...

max weight capacity Part Number PH54FR. What is the max tongue and towing capacity when the receiver is extended fully? The video said there was a chart on your site, but I cant find it. | There is not a maximum capacity for the Adjustable Drop...

good evening coming to you cause your the pros. i have a new Volkswagen Taos which comes with no hitch. only two out there that would fit, Curt 13496 and a Draw tight model. the Curt is an easier install then the Draw tight. both would only...

I cannot understand the bolts and how to put the cotter pins on. It seems to require superhuman strength. | Yeah, I hear you. The cotter pins when they're new are extremely difficult to get in and out of the pins. You're going to have to keep...

what is the length of the section coming off of the receiver that has the gusset on it? | I am not totally sure what dimension you are looking for, are you asking about the length of the shank section that fits into the vehicle hitch or are...

Does this product work with a 2020 Jeep Wrangler. Have spare tire on rear door and I have a Van Kams welded aluminum rack | Yes the Patriot Hitches Adjustable Drop Hitch Receiver Adapter # PH67SR could be used on your 2020 Jeep Wrangler and...

Hello, I have a question. I have a 2012 Ram 1500 Express 4 wheel drive with rear exhaust. I have a trailer hichmounted cargo tray that comes straight out of the hitch receiver. The problem Im having is since the exhaust goes straight out the...

Can this be used on a vehicle with a lift that uses a weight distribution hitch? | My recommendation is to use a replacement drop shank like the Equal-i-zer Weight Dist Shank # EQ90-02-4400. This shank is capable of up to 9" of drop and will...

Do you have or can you make a hitch 16 inch male by female | Hello David, are you looking for a Patriot Hitches Adjustable Drop Hitch Receiver Adapter in a 16" drop? If so, I am afraid the 11" drop # PH67SR is the largest they make. If you...

I have a ford f150 4x4 need to the hitch aprox 7in , the travel trailer I am pulling is aprox 5000lbs and I have sway bars on my current ball mount.. can i use this | I have another option for you, but while the Patriot Hitches Adjustable...