!Pleasure Way  x   >   !Rockwood Extreme Sports Package Camper  x   >   Marlboro  x   >   Diversi-Tech  x   >  

Can this be cut down? My door is 5.5’ tall and has a 45 degree cut on the end to match the top part of frame | If you wanted to cut down the 2" Wide Continuous Hinge # MA64ZR you would want to first remove the pin and separate each part and...

Who sales them why is it so hard to find, I have a 92 skyline nomad , can not find door replacement LH hinges , rectangle 2by72 | With your trailer being 30 years old most parts are discontinued at this point so a lot of troubleshooting and...

Is the pinfoot also aluminum meaning that the entire hinge is made of aluminum. The intended application will be exterior and I need to avoid pins or any part of the hinge that will rust. Currently have installed a hinge not from Etrailer...

Can I cut it down to 7’ and not rune it? | Yes, you can cut the 8 foot long hinge kit part # MA32VR down to 7 feet in length and it would work great. |

I am looking at your 10 inch by 3/4 in barrel hinge can you tell me the weight limit they hold | I checked with the manufacuterer and the 10-1/4" Long - 3/4" Weld-On Hinge w/ Brass Bushing and Grease Zerk item # MA89ZR has a 576 lbs weight capacity....

looking for an aluminum hinge 3 W x 4 L x 1/4 Thick with 3/8 pin quantity 5 | It appears we do not carry a hinge that will fit those parameters exactly. We do offer a few 3" wide continuous hinges with a 3/8" pin like the # MA94ZR. This is a...

The 72” continuous piano hinge you have for enclosed trailer that is 4 inches wide. Does it have the holes pre drilled in for mounting? | The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel # MA85VR does not come with pre-drilled...

How is the pin retained? | Barrel hinges like the Weld-On Barrel Hinge with Grease Zerk # MA29ZR can be installed in two ways. One where the hinges face the same direction which allows the door to be lifted off the hinges if ever needed and...

I need to know the load limit or weight bearing in pounds for 2 different continous steel hinges. Ma75vr Ma45vr Also do you have sane time of these hinges in 3 feet length? If the 3 feet length is available what are the part numbers and weight...

How much weight can this support and can it come in 8foot | Hinges like the 6" Wide Continuous Hinge - 6' Long - 1/2" Pin Diameter - Steel # MA52VR do not have weight capacity ratings and it is up to the installer to determine if it will be...

we have an old Logan horse trailer with piano hinges that have rust bleed. We want to clean and repaint entire trailer. What is best way to remove rust from the hinges and protect them from rusting again? | On a Steel Hinge # MA52VR you will...

Do you sell something similar that is shorter? I only need one that is like 13 inches long. | The 6" Wide Continuous Hinge we currently only carry in a 6' # MA52VR and 8' # MA32VR length. The 6' length is the shortest piano style hinge we carry...

Can I shorten this hinge? | Yes, if you wanted to cut down the 3" Wide Continuous Hinge # MA75VR to shorten it you certainly could. |

Can this hinge be shortened? And would this be suitable to be used for a ramp door extension or would there be a better product? | Yes, the 6' Long, 4" Wide Continuous Hinge # MA85VR can be cut down to the length needed. It is a 270 degree...

Item # MA52VR 6inch Wide Continuous Hinge - 6foot Long - 1/2inch Pin Diameter - Steel Im not seeing any information on loading capabilities. Do you have any information or should I just work with my basic knowledge of steel? | The 6" Wide...

how much weight can these hold 3 of them on a 300 lb door | The Weld-On Hinge with Stainless Steel Bushing and Pin # MA66ZR you were looking at does not have a weight rating, but I reached out to my contact at Marlboro who makes this hinge and...

I need 19 hinges 36” long. Can these hinges be cut in half to make two hinges? | Yes, the 3" Wide Continuous Hinge - 6' Long - 1/4" Pin Diameter - Aluminum # MA74ZR can be cut down to fit your needs. I just recommend first removing the pin and...

What is the suggested weight limit that this product can handle? | The Butt Hinge w/ Non-Removable Pin, # MA87ZR does not have a weight rating. |

ID LIKE TO USE THE 6inch PIANO HINGE TO HINGE A CONVENTIONALLY FABRICATED WOODEN WITH 2inch LUMBER ATTIC STAIR IN MY GARAGE - INTENT WOULD BE TO DRILL MOUNTING HOLES INTO HINGE ON 4inch CENTERS AND BOLT HINGE TO ATTIC JOISTS / STAIR ASSEMBLY...

Im looking for barrel Is hinge for my horse trailer tack room door. | Hello Kristine. We carry quite a few hinges and barrel hinges, so we very well may have what you need. If you can provide some dimensions for the hinge, I can take a look...

I need a 50 door hinge for my Palomino pop up truck camper. Would I be able to cut your 72 aluminum door hinge to the required length? | Yes, if you wanted to cut down the Marlboro Continuous Hinge # MA64ZR you would want to first remove the...

Do you sell the bolts and washers and nuts for a hitch? I have a 98 windstar and I have the hitch that was taken off it, I want to put it back on but need bolts, leaders and a wiring quick kit. Thanks for any help you can give. | We can obtain...

What is the recommended weight that this hinge can handle? | I reached out to Marlboro Manufacturing and found that the load carrying capacity of the Weld-On Hinge w/ Brass Bushing and Grease Zerk # MA89ZR is 576 lbs. |

I have a 1931 Essex Super Six Rat-Rod, I wanted to know if your Piano Hinge 3 wide - 3/8 pin, by 6 long could be cut to be used as door pieces? Thank You | The 3" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel part # MA75VR can...