How is Pin of Trailer Barrel Hinge Secured

Question

Question:

How is the pin retained?

asked by: Martin

0

Expert Reply:

Barrel hinges like the Weld-On Barrel Hinge with Grease Zerk # MA29ZR can be installed in two ways. One where the hinges face the same direction which allows the door to be lifted off the hinges if ever needed and two where the hinges face each other so that when they are welded on fully assembled to the trailer the door can never be removed.

expert reply by: Jameson C

0

Answer 1

Hinges such as the Weld-on Barrel Hinge #MA29ZR are not given specific weight ratings as that is at the discretion of the fabricator. There's way too many variables to give a standard weight rating. I'd run your plans by a local fabricator to…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 4

Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…

view full answer...

Answer 5

Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…

view full answer...

Answer 6

Hey Roger, the only wheels we currently have with blue are going to be various sizes of the Aluminum AM06 Black Machined Trailer Wheel w/ Blue Inserts - 14" x 5-1/2" Rim - 5 on 4-1/2 #AM78FV. This one is 14" diameter, 5 on 4-1/2"…

view full answer...

Answer 7

If the hub that was on your trailer axle previously had 8-91A stamped on the back of it your spindle should require inner and outer bearings of #L44649 like you used. The part #8-91-05UC1 SHOULD be an exact replacement. However we need to double…

view full answer...

Answer 8

Good afternoon George; no it usually does not! The Fill-Rite Piston Fluid Pump #FR53XQ uses a hand lever with a double piston design and moves 20 gallons per 100 strokes, which means fewer cycles to move the same fuel compared to the rotary crank…

view full answer...

Answer 9

The hardware you'd want when installing the Universal Cam-Door Lock for Enclosed Trailers, item #383200 really depends on the application. I'd recommend carriage bolts through the outside of the trailer to the inside and then tightening on…

view full answer...

Answer 10

You can use three 3/8-16 grade 5 bolts to install the etrailer jack #TJA-5000S-B or any other style A-frame jack; though we do not carry the hardware it is available at any hardware store. I attached an install video for this jack for you to check…

view full answer...

Answer 11

It sounds like you are definitely on the right track here. The #MR79ZR is indeed the correct suspension upgrade kit for your 2007 Colorado 5th wheel with LRE suspension. Moryde makes a fantastic suspension upgrade kit. The heavy duty shackles and wet…

view full answer...

How is Pin of Trailer Barrel Hinge Secured

Product Page this Question was Asked From

Continue Researching