What Size Zerk Fitting Will Replace A Damaged Lock N Roll Coupler
What size is the low profile zerk grease fitting? When the trailer hitch side was welded, the fitting was ruined. Too much heat froze the ball bearing and one cannot grease. | I spoke to Lock N Roll and they use 6mm x 1 low profile zerk...
Can The Marlboro Continuous Hinge Be Cut Down To Fit A Palomino Pop-Up Truck Bed Camper Door
I need a 50 door hinge for my Palomino pop up truck camper. Would I be able to cut your 72 aluminum door hinge to the required length? | Yes, if you wanted to cut down the Marlboro Continuous Hinge # MA64ZR you would want to first remove the...
Can the 4" Wide Continuous Hinge MA85VR Be Cut To a Different Length?
Can this hinge be shortened? And would this be suitable to be used for a ramp door extension or would there be a better product? | Yes, the 6' Long, 4" Wide Continuous Hinge # MA85VR can be cut down to the length needed. It is a 270 degree...
Weight Rating for Weld-On Hinge w/ Brass Bushing and Grease Zerk
What is the recommended weight that this hinge can handle? | I reached out to Marlboro Manufacturing and found that the load carrying capacity of the Weld-On Hinge w/ Brass Bushing and Grease Zerk # MA89ZR is 576 lbs. |
Marlboro Manufacturing Continuous Hinge Material Type
Is the pinfoot also aluminum meaning that the entire hinge is made of aluminum. The intended application will be exterior and I need to avoid pins or any part of the hinge that will rust. Currently have installed a hinge not from Etrailer...
Replacement Door Hinge For A 1992 Skyline Nomad Travel Trailer
Who sales them why is it so hard to find, I have a 92 skyline nomad , can not find door replacement LH hinges , rectangle 2by72 | With your trailer being 30 years old most parts are discontinued at this point so a lot of troubleshooting and...
Aluminum Piano Hinge for Outdoor Use That is 4" Wide
looking for a piano hinge stainless steel or Aluminum min opening of 4 max opening 6 66 inches long heavy gauged material for wet out door application | We only have one piano hinge that is either 4" or 6" wide and constructed of either stainless...
Do Marlboro Piano Hinges Have Weight Capacity
I need to know the load limit or weight bearing in pounds for 2 different continous steel hinges. Ma75vr Ma45vr Also do you have sane time of these hinges in 3 feet length? If the 3 feet length is available what are the part numbers and weight...
Can The Marlboro 6' Piano Hinge Be Cut In Half?
Can this hinge be cut and used as two 3foot pieces? Or would the pin come out if its cut in half? | I reached out to Marlboro Manufacturing and they informed me that it is okay to cut their 4" Wide Continuous Hinge - 6' Long # MA42VR in half....
Does The Marlboro Continuous Hinge Come With Pre-Drilled Mounting Holes
The 72” continuous piano hinge you have for enclosed trailer that is 4 inches wide. Does it have the holes pre drilled in for mounting? | The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel # MA85VR does not come with pre-drilled...
Weld On Hinges For a 70" Wide Trailer Door That Weighs 600LBS
I have a need for 2 sets of hinges 50inch long for a door 70inch wide constructed of stainless steel - overall weight 600# materials Stainless Steel Please advise if your hinges with 1.2inch pin will be capable of handling the load Mounting...
Can The Marlboro Continuous Hinge # MA64ZR Be Cut Down
Can this be cut down? My door is 5.5’ tall and has a 45 degree cut on the end to match the top part of frame | If you wanted to cut down the 2" Wide Continuous Hinge # MA64ZR you would want to first remove the pin and separate each part and...
Can 3" Wide Continuous Hinge # MA75VR be Shortened
Can I shorten this hinge? | Yes, if you wanted to cut down the 3" Wide Continuous Hinge # MA75VR to shorten it you certainly could. |
Is there A Weight Capacity for the Marlboro Continuous Piano Hinge
What is the weight limit on these hinges? Looking to make a hinged queen size murphy type bed in our cargo trailer. | Marlboro piano hinges like the 3" Wide Continuous Hinge # MA74ZR you're looking at do no have weight capacities. Marlboro mentions...
Does The 4" Wide Continuous Hinge Have A Rust Preventative Coating?
Does this hinge have any kind of coating to prevent rust? Or does it need painted? | The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter # MA85VR is made from mill finished steel with a commercial die cut quality, however they are not...
Do The Marlboro Continuous Hinges Come With Pre-Drilled Mounting Holes
I was looking at your 6 wide continuous hinge 1/2 pin diameter but in your picture I didnt see any holes for the screws or I have drill my own holes. | The 6" Wide Continuous Hinge - 8' Long - 1/2" Pin Diameter # MA32VR you referenced along...
Do Marlboro Continuous Hinges Come In 48" Or 96" Lengths
Im interested in purchasing item # MA94ZR.My question is this item is 72 long. Do you offer this item in a 48 or a 96 length | The stainless steel options of the Marlboro hinges only come in 72" like the # MA94ZR. You could cut this down to...
Hinge for Folding Nose of Trailer
Hello, I would like assistance in ing the appropriate hinge for my application. The application is we have a 200+ lb metal cover, which will be used to protect equipment. The only support the hinges have are the front lip of the trailer, where...
Does The Weld-On Hinge MA66ZR Have A Weight Rating?
how much weight can these hold 3 of them on a 300 lb door | The Weld-On Hinge with Stainless Steel Bushing and Pin # MA66ZR you were looking at does not have a weight rating, but I reached out to my contact at Marlboro who makes this hinge and...
Replacement Grease Zerk Fitting for MORryde 3000
I have a Morryde 3000 on my fifth wheel. What size zerk fitting do I need. Back zerk broke off . Thank you | The grease zerk fitting on your MORryde 3000 is M6 x 1.0 according to my contact at MORryde. To replace this you need the following...
Are There Any 2" Wide Piano Hinges With A 1/4" Pin And 83-1/2" In Length
Im looking for a piano hinge for a 1995 Starlite pop up camper rear fold down door. It is 2x 83 1/2 with 1/4 pin. | We currently only offer a 2" piano hinge with a 1/4" diameter pin in a 72" length so you would need to purchase two and cut one...
Does Marlboro Weld on Hinge Have Weight Capacity
I was looking to weld on 2- MA59ZR 10 hinges and was wanted to know what the weight capacity they can support? Thank You | Marlboro does not list weight capacities for the # MA59ZR that you referenced. They state it will be up to the installer...
What Lengths Are The Marlboro 6" Wide Continuous Hinge Available In?
Do you sell something similar that is shorter? I only need one that is like 13 inches long. | The 6" Wide Continuous Hinge we currently only carry in a 6' # MA52VR and 8' # MA32VR length. The 6' length is the shortest piano style hinge we carry...
Do The Marlboro Continuous Hinges Have A Load Rating
ID LIKE TO USE THE 6inch PIANO HINGE TO HINGE A CONVENTIONALLY FABRICATED WOODEN WITH 2inch LUMBER ATTIC STAIR IN MY GARAGE - INTENT WOULD BE TO DRILL MOUNTING HOLES INTO HINGE ON 4inch CENTERS AND BOLT HINGE TO ATTIC JOISTS / STAIR ASSEMBLY...
Filter Your Search
Contact and Help