Winch Mount For a 2010 Honda TRX 420 Compatible With Traveller 2,500lb Winch
I have a 2010 honda 420 with a straight rear axle. And the winch is a traveler 2500lbs from tractor supply. I need the correct mounting hardware. Thanks | Your Traveller 2,500lb winch is very similar to the Bulldog Winch Powersports Series...
Troubleshooting SuperWinch LP8500 That Clicks But Does Not Operate
Super winch LP 8500When I hit my remote you can hear the solenoids click both ways but the winch does not turn it’s been sitting a couple of years outside you think the motor is froze up | Since the solenoid(s) on your SuperWinch LP8500 Off-Road...
Can A Winch Battery And Trailer Breakaway Battery Both Be Charged Through 7-Way 12v Hot Lead
I am mounting a winch on my car trailer and I’m wanting to wire the winch battery to the 7way connector to maintain battery charge. I also have a brakeaway battery that is wired to the 7 way connector. Am I able to maintain charge for both battery’s...
ATV Winch and Winch Mount for a 2006 Yamaha Wolverine 450
I would like to purchase a winch and everything I need to mount it to my ATV. I have a 2006 Yamaha Wolverine 450. I was looking at part # sw1130220. | For your 2006 Yamaha Wolverine 450 we have the custom mount # BDW15140 which mounts directly...
Winch Mount Plate Comparison for Front Mount Receiver Mounting Plate
What is the difference between the curt C31010 and BDW20011? How thick is the material of both? Thank you. | The plate on the part # C31010 winch mount plate is 1/4 inch thick. This mount has 2 sets of four (eight) mounting holes centered...
How Thick is the Mounting Plate on the Removeable Mounting Plate.
How thick is the plate? | The plate that the winch mounts to is 1/4 inch thick. This mount has 2 sets of four (eight) holes, centered on the cable opening, in a rectangular pattern for mounting the winch to the plate and the measurements are...
Can the Winch Mount Plate # C31010 be Used with the Multipurpose Ball Mount # D210
Hi - awesome website - I have a 2015 F150 and I tow a single Harley trailer behind it. No problem. I would like to buy this #D210 and then also add Item # C31010 to the top in order to attach a winch. That way I can winch the bike up onto the...
What are the Overall Dimensions of the Replacement Roller Fairlead # BDW30003T
My current fairlead is in need of replacement. The dimensions are 11 1/2inch X 5inch tall and the mounting holes are 10inch apart center to center. Is this the right replacement part - I see no dimensions on your web site. Replacement Roller...
Options For Replacing The Controller On A Bulldog Winch BD500600
do you sell the replacement remote for this winch Bulldog DC9.0 Integrated Off-Road Winch - Wire Rope - Roller Fairlead - 9,000 lbs Item # BD500600 | I do have a potential solution for you, but we do not carry a direct replacement for the wired...
Can Winch Be Installed on ATV Snow Plow
Can you mount the winch on the plow instead of atv? | The Bulldog ATV Snowplow Winch # BDW15021 can be mounted directly to the snowplow provided there is a suitable place to mount it. You can refer to the linked image that shows how this winch...
Electric Winch with Remote Needed to Pull Lightweight Wheelchair Into Toyota Highlander
I am disabled but would like to buy winch that will pull manual very light weight 29lb wheelchair into the backseat of my Toyota Highlander. It would need to be electric and have a remote control. Do I need electrician or a mechanic to...
Should Larger Tires and Wheels be Used to Go Camping on the Beach with a Trailer
I have a 4x8 utility trailer with 4.5 hubs. Today I have 13 rims.. Im going camping on a 4wd remote beach for a week, and want to take it with me. Suggestions on the best tires to use? Does it make sense to get bigger rims and bigger tires?...
What is the Difference Between the Staun Tire Deflators and the Bulldog Winch Tire Deflator?
Good evening! I was about to pull the trigger and order some Staun automatic tire deflators for my new Jeep, but saw your automatic tire deflators online. How does the quality of your deflators compare to the Staun deflators? What are the...
What Hoist do You Recommend for Raising and Lowering My Snow Plow Blade?
Hello. I am an 72 yr old women. I live alone in a mountain town. I want to be able to pull up or lower my utility sled on a sometimes icy slope. I don’t have a trailer hitch for a winch. Is there another way I can pull it up? Is there a winch...
Redarc BCDC Battery Charger Compatibility for 2019 F-350 Chassis Class C
Thanks I think I will need a longer cable than 10', which 16-20' item number do I choose | The Redarc In-Vehicle BCDC Battery Charger - Dual Input - DC to DC - 12V/24V - 40 Amp # 331-BCDC1240D will work well on a Class C vehicle. The unit will...
7-Way Lead Gets Hot When Running Battery Charger Line Through Trailer Connector
I installed a DC-DC charger in my trailer, not yours but equivalent to your Redarc BCDC1212 item RED96FR. While charging at full rate it could probably pull up to 400 watts of power. Power is transferred through the 7 pin connector to the...
Which Winch Cover Fits Bulldog Winch # BDW10029
Will the BDW20193 cover fir the 5800lb winch, or do I need to step up to something like the BDW20190? | The winch cover you need for the Bulldog Winch Trailer Winch # BDW10029 that you have is the Bulldog Winch Winch Cover # BDW20046 which is...
Can 7-Way Trailer Connector Accessory Circuit be Used to Power Trailer-Mounted Winch
Can I wire a trailer winch directly to the auxiliary power supply on the trailers 7-way plug? | The 12-volt accessory circuit lacks the amperage to power a trailer mounted winch. Your best bet would be to either install a 12-volt deep cycle...
Wiring Options for an Electric Winch Powered by an Additional Battery
I have pretty much figured already that I need to run #4 wire from the engine alternator back to the bed to charge a seperate battery which will power my winch. The truck is an 06 GMC. I will be pulling small logs to level ground to cut up....
What Winch do You Recommend for My 20-Foot Car Trailer for Loading Cars?
What size winch is recommended for use on a 20’ aluminum car trailer? Would be used on cars up to 4,500 lbs. | For hauling cars with your 20-foot aluminum car trailer for loading cars up to 4,500 pounds, I recommend the Bulldog Winch Standard...
What is Weight Capacity of Bulldog Winch Receiver Mount with Shackle # BDW20186
I understand that it has a working weight limit of 13000 pounds and breaking limit of 78000 for the shank but there is no information on the working strength of the D ring I seen one last week break off and go flying through someones back window...
Recommended Trailer Battery Charger Located on Trailer for Battery Bank with Solar Panels
Converting a utility trailer to a work trailer and how to get the trailer charged by the vehicle when not using solar panel. the answer was to mount the charger on the vehicle I needed to be able to mount the charger on the trailer because...
Does Power Wiring on Badlands Apex 12000 Winch Need to be Stripped for Anderson Connector
I need to put my Badland Apex 12000 on the rear trailer hitch of my Toyota 4Runner Limited. I think your BDW20155 winch receiver mount fits the Apex 12000 mounting holes. What I’m not sure about is the BDW20206 rear wiring kit connecting to...
Can Tie-Down Strap for Oversize Spare Tire Fit a 31" Spare Tire
Will tie down adjust to a 31inch tire? Thanks | The Bulldog Winch Ratcheting Wheel Tie-Down Strap for Oversize Spare Tire # BDW20363 is compatible with up to a 40" tire and can be adjusted down so it will be compatible with your 31" tire as...
Filter Your Search
Contact and Help