Will the Thule Roof Mounted Cargo Basket # TH859XT fit a 2010 Dodge Nitro
Help..Looking on line at the Thule roof mounted cargo basket. Will it fit on 2010 Dodge Nitro??? I will be carrying a 12 ft kayak and 10fooot 6inch kayak. Ive had failed attempts of roof carriers. Dealer wants a arm and a leg. Thank you....
Parts Needed to Flat Tow 2010 Dodge Nitro
I have a 2010 Dodge Nitro. SE 4x4, and I need to get a tow bar bracket. Thatll work so I can use a quick connect toe bar. I dont know what to purchase where to purchase or how to hook up the wires. so I can tow behind motothome. Do i need to...
Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel
I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...
Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
What Gauge Wire Runs To The Battery On The Curt 4-Way # C56334?
What size wire runs to battery? | The Curt T-Connector Vehicle Wiring Harness # C56334 is going to come with a 12 gauge wire to run from the converter box to the battery. |
How Do You Attach The Wiring Socket To The Front Of The Blue Ox Base Plate On a 2007 Dodge Nitro?
I just received my base plate. Circled In the picture, Ive seen the 6 round hole wire mounted here. I dont see threads in the hole. What do in use to mount or is this not a mount? Thanks | The Blue Ox 6-Pole, Round Pin, Trailer Wiring Socket...
Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103
do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...
2012 Dodge Nitro Trailer Hitch and Bike Rack Recommendations
I need a hitch and bike rack for my 2012 Dodge Nitro. What do you recommend? | I recommend using the etrailer Trailer Hitch Receiver # e83KR for carrying a bike rack on your 2012 Dodge Nitro because it has a matte black finish to help match...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer
Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103
I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....
Leaf Spring Suspension Recommendation for 42 x 48 inch Trailer
Second one Ive owned and the suspension with the slipper springs is horrible and bounces all over. Before I put this one together Id like to see whats needed to change the slipper to a shackle type with double eye springs to try and help smooth...
Trailer Hitch Recommendation for 2007 Dodge Nitro
Which is better for my 2007 Dodge Nitro, easy installation,and pull trailer with mower? | Both the Curt # 13334 and the etrailer hitch # e83KR are very easy to install and are virtually identical hitches except for the finish. The Curt # 13334...
Trailer Hitch for a 2012 Mercedes R350 BlueTec
Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...
Can Jeep Liberty Hitch Fit 2011 Dodge Nitro
Hi I have a 2011 dodge nitro and I need a hitch Ive been looking and I see that a jeep liberty hitch has a higher rating of 7500 lbs weight distribution to the nitro hitch of 6000. Now I will generally be towing light but I am a race car mechanic...
Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103
Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...
Weight Distribution Recommendation for a 2010 Dodge Nitro and Max Towing Capacity for Dodge Nitro
I m buying a 2005 Jay flight camper I think it weights around 7600. Hopefully my 2010 Dodge nitro 3.7 v6 4x4 can pull this. However I need to know what kinda hitch and sway bar that I would need. Thanks for any advice! | I checked the owner's...
What Size Bolts are Used for Curt Trailer Hitch Receiver for 2008 Dodge Nitro
What length and size bolt is needed for hitch assembly for a 08 Dodge Nitro SLT frame? | According to the linked installation instructions the bolts are M12-1.75 x 45mm, although these do come with the Curt Trailer Hitch Receiver # 13334. If...
Replacement E009 Key For Mopar OEM Roof Rack on 2009 Dodge Nitro
I need a replacement key for my dodge nitro factory roof racks E009. Do you have something to fit? | Thule made those racks for Mopar, so the Thule # THKEYN009 would be the correct replacement. The older lock cores were just a little shallower...
Hitch Bolts Do Not Want to Thread Into Weld Nuts on 2008 Dodge Nitro
Morning, I purchased the trailer hitch and electrical harness for a Dodge Nitro 2008. The bolts will not thread into the frame nut. Sorry, do not have the invoice handy. Please advise. | It sounds like the weld nuts need to be cleaned. We recommend...
Filter Your Search
Contact and Help