Parts Needed to Flat Tow 2010 Dodge Nitro
Updated 02/18/2026 | Published 02/16/2026 >
Products Featured in This Question
Question:
I have a 2010 Dodge Nitro. SE 4x4, and I need to get a tow bar bracket. Thatll work so I can use a quick connect toe bar. I dont know what to purchase where to purchase or how to hook up the wires. so I can tow behind motothome. Do i need to make hile in bumper?
asked by: Anthony B
Expert Reply:
Hey Anthony, the first thing you need to flat tow your 2010 Dodge Nitro is a base plate kit like the Blue Ox part # BX1976 that you referenced which provides the connection point from the vehicle to a tow bar. You do not need to cut a hole in your bumper to install this.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes with safety cables. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Curt RVi Series 4 Portable Flat Tow Brake System # RVI44FR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Product Page this Question was Asked From
Blue Ox Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Completely Hidden
- Blue Ox
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Can A Demco Tow Bar Be Used With A Blue Ox Base Plate?
- Q&A: Will Curt Rambler Tow Bar Work With Blue Ox Base Plates Without An Adapter
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Must-Have Flat Towing Components
- Q&A: Base Plate and Flat Tow Wiring Kits for a 2011 Jeep Liberty
- Article: Flat Towing Package for 2005-2007 Jeep Liberty
- Q&A: 2009 Jeep Liberty Recommended Parts for Flat Towing
- Q&A: Why Aren't The Torque Specs For The BX2908 Listed In The Installation Manual
- Q&A: Difference in Amperage Draw Between 1157 Incandescent and LED Bulb
- Q&A: Parts Needed to Flat Tow 2024 Chevy Equinox
- Article: What Jeeps Can Be Flat Towed?
- Article: Trailer Wiring Diagrams
- Article: Rooftop Cargo Carriers


Frank
2/18/2026
Mounted the bracket on my jeep over a year ago. Easy to install. Bolted right up. No cutting. Flat towed behind my RV from Texas to California and back with no problems. Great product.