Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Engine Block Heater for a 2008 Kia Rio with a 1.6L I4 Engine
Hi, I would like to where can I find the block heater cord on a 2009 KIA RIO? Where could i locate this, and what the instructions? Would you be able to tell me where the cartridge heater is installed on this vehicle and what the instructions...
Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103
I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....
Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103
Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...
Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDI
Is the car just too low for a hitch? | For your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006...
Will a Roof Rack from a 2015 Volkswagen Golf Fit a 2008 Volkswagen Rabbit
Im looking to buy a second-hand roof rack for a good price for my 2008 VW Rabbit. The rack Im looking at is a craigslist ad for a 2015 VW Golf. Would this rack be compatible with my rabbit? | The 2008 VW Rabbit and the 2015 VW Golf do not use...
Folding Cargo Carrier Options for a 2010 Subaru Outback
I have a 2010 Subaru Outback and want to purchase a 20x60 or 24x60 folding cargo basket. Problem I see is that from the center of the hitch pin to the end of the bumper is about 5 1/2 - 6 inches. I seems I would need to extend the hitch to attach...
Will Installing Trailer Wiring Harness # 119250KIT Cause Problems on a 2008 Mercedes R320 CDI
I have 2008 Mercedes R 320 CDI. I am planning to install towing hitch for this car. I was told by dealer that installing aftermarket wiring may cause problems in my vehicle. What kind of problems I may have if any? | If wired correctly, you...
Roof Rack and Boat Carrier Recommendation for Mercedes Benz 2008 R320
there appears to be covered for the hardpoint for attaching a roofrack Do they just pop-off? Are the Thules better than Mercedes manufactured ones, and enable more accessories? The distance between the hard points seems close together. What...
Is Fascia Trimming Required to InstallCurt Trailer Hitch C11074 on a 2008 Volkswagen Rabbit
Installation instructions for this part Curt Trailer hitch indicate that minor fascia trimming is required for installation on a 2008 VW Rabbit. Can you tell me just how much trimming is actually required and if a non-professional will be capable...
Replacement Mounting Parts for Thule Fit Kit 3038
Need Thule part #50864, 50784, 50786. Qty 2 of each. They are part of FIT3038. Can you get these? Thank you. | The missing screws, washers and nuts are only available inside the kit itself, part # THKIT3038. |
Is Kenda Trailer Tire and Wheel Combo # AM3H290 Rated for Highway Travel
Hi I bought two trailer tires / wheels from you awhile back and I really like them a lot. AM3H290 Well, Ive had some concerned people ask me if these tires are rated and safe for highway travel. They suggested I get a thinner tire for road...
Why Does Curt Require a Stabilizer Strap But Other Hitch Companies Dont
Why does the Curt hitch require a strap but Draw Tite and Hidden Hitch do not?Is the Curt weaker or less stable? | Curt recommends the stabilizer strap with non-supported loads like bike racks to help support the hitch when going over bumps...
Hitch Recommendation for a 2007 Volkswagen Rabbit
Hi, I am looking to get a hitch to install a bike rack on my 2007 Rabbit? However, there are 2 types Class 1 1000 lbs and Class 1 2000 lbs which one should I buy? and what is the difference? Would this make a difference in the installation?...
Trailer Hitch, Wiring and Ball Mount for 2008 VW Rabbit
need to buy a motorcycle trailer hitch and required accessories. Renting motorcycle trailer from UHaul. I have a 2008 Volkswagen rabbit | For your 2008 VW Rabbit the Curt # C11074 is a fit and is a Class I hitch with a 1-1/4" receiver that...
Will Hollywood Racks Express 3 Bike Rack Damage Rear Window on 2008 VW Rabbit
Hello. Can I truly use the Hollywood racks express 3 bike rack trunk mount fixed arms for $60 for my 2008 Volkswagen rabbit? At the bike store they told me they wouldnt recommend this product for a VW rabbit because of the rounded back window...
Which Trunk Mount Bike Racks Fit a 2008 Volkswagen Rabbit hatchback
Will this Thule bike rack #TH910XT fit on a 2008 VW Rabbit hatchback? | The Thule Passage 2 Bike Carrier, # TH910XT, is a fit for the 2008 Volkswagen Rabbit 3-door and 5-door models. I have included a link to the installation details and a link...
Does the Draw-Tite Class II Ball Mount # 3593 Use a 5/8 Inch Diameter Hitch Pin
Does this ball mount take a 5/8 dia pin hitch lock? | Class I and II accessories like the Draw-Tite Class I Ball Mount you referenced all use a 1/2 inch hitch pin or lock. Class III, IV and V hitches use the thicker 5/8 inch diameter hitch pin...
Trailer Hitch, Ball Mount, Balls, and Wiring for a 2008 Volkswagen Rabbit
i am looking at the hitch #24825. do i also need something else? do i also need the sportframe drawbar? do you have instructions you can give me on how to install on my car? thx!! | For the 2008 Volkswagen Rabbit, Draw-Tite trailer hitch #...
Best Trunk Bike Rack for 2008 Mercedes R350
Looking for the best trunk bike trailer for my 2008 Mercedes R350 - recommendations? I would like to haul at least 3 adult bikes | The best trunk mounted 3-bike bike rack around is the Thule OutWay 3 Bike Rack part # TH56BV. I checked with...
Wiring Harness for LED Lights and Other Parts Needed to Tow a Trailer with a Mercedes-Benz R320 CDi
hey guys, looking to order a kit to make my 2008 Mercedes R320CDi tow-light compatible. wondering if Item # 119250KIT can also drive LEDs? please let me know when you get the chance, thanks! | Yes, the ZCI Wiring Harness # 119250KIT will work...
Tips for Installing a Trailer Wiring Harness on a 2008 Mercedes R320
Hi, do you have instructions specific for a Mercedes R class? I dont seem to be able to find them. Thanks. | Trailer wiring harness # 119250KIT is a universal type of hardwire harness so it doesn't have vehicle specific instructions for any...
Filter Your Search
Contact and Help