Result:

Articles

Thule Spare Me Rack on 2010 Rav4 with Back Up Camera

I see that I cannot use a Thule Spare Me 2 bike carrier if I have a backup camera on my 2010 Rav4. Why? What are the alternatives? I can live without the camera for a short term. Thanks! | I spoke with the folks at Thule regarding the spare...

Bike Rack Recommendation for 2008 Infiniti G35 that Allows Rear Trunk Lid to Open

Hi, currently looking for a trunk mount for max 2 MTB Orbea Oiz on a 2008 Infiniti G35x. Ideally one that can stay on and allows trunk to open. Do you work with shops in the DMV area that install these? Thanks | Hey Kenneth, there isn't a trunk...

Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel

I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...

Looking for Hitch Solution for 2004 Monaco Dynasty Coach

Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...

Availability of an A-Frame Coupler that is 45 Degrees and Not 50 Degrees

Is there an A frame coupler that is NOT a 50* angle? I have an older stock trailer and it needs like a 45*. | All of the A-frame couplers we carry are for the standard 50 degree A-frames. What you could do, since your A-frame is a lower angle,...

Is Trailer Suspension U-Bolt Plate Supposed to Bend and What is Torque Spec for 3/8" U-Bolts

So, I noticed in the video the spring plate does bend when tightened. How much torque was used? This is normal on the spring plates? They should bend slightly? I freaked out after I noticed my bent. But this is how it should be? | Trailer...

Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103

do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...

Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer

Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...

Recommended Weight Distribution System For Prolite S Camping Trailer

Hi, my Prolite S camping trailer is @ 1600lb heavy, tongue weight is 200lb, what weight distribution you can recommended for me?? Plese ASAP. Thanks | For your Prolite S camping trailer, I recommend the Reese Steadi-Flex Weight Distribution...

Difficulty Hooking on Bottom Trunk Mount Bike Rack Straps to Truck or Hatch

Hello, my trunk is so tight there is not enough space for the hooks to fit at the bottom of the trunk lid for my 2007 Infinity G35. Attaching these hooks under the bumper is not an option because it is very soft and will pucker the bumper. I...

Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103

I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....

Trailer Hitch for a 2012 Mercedes R350 BlueTec

Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...

What is the Weight of Hollywood Racks Sport Rider SE2 2-Bike Platform Rack # HR1450Z

How much does this bike rack weigh? We plan to use it with two different vehicles and ease of moving from one to another is important. We had the Thule Apex and it weighed 41#s which was OK. Does this weigh about the same? | The Hollywood...

Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103

Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...

How to Correct Sagging Class I Hitch and Bike Rack on 2006 Infiniti G35 Coupe

Wondering if it is possible to have someone weld a higher class hitch to the frame on Infinity G35 coupe? Is this possible? Have a class I now and it is sagging badly Thanks! | Trailer hitch makers generally produce hitches that are designed...

Availability of Hitch for 2006 Mercedes R500

Does this fit a 2006 Mercedes R500? | We offer two different Class III hitches that are a fit for your 2006 M/B R500. Both the Curt # C13103 and the Draw-Tite # 75470 offer a 3500 lb towing/ 350 lb tongue weight capacity, but the warranty requirements...