Rondo x > Rodeo Sport x > Rabbit x > Miata x >

Result:

Articles

Do I Really Need a Braking System to Flat Tow My 2001 Mazda Miata Behind 2021 Winnebago?

Hey there, I am towing a 2001 Mazda Miata behind a 2021 Winnebago Travato 59K, do I really need this Brake Buddy Classic 3, or is it overkill? I have a Roadmaster base plate with removable crossbar and the Falcon 2 tow bar. I think Im good,...

Best Flat Tow Setup For 2001 Mazda Miata With Blue Ox Tow Bar

I’m setting up our 2001 Miata for flat towing. We currently have a Blue Ox tow bar that we use with our Jeep and would like to use it to tow Miata, if we can find the correct ends. We need wiring pkg as well including charging | Hello Eric,...

Roadmaster Base Plate Kit and Adapter for 1993 Mazda Miata with Blue Ox Tow Bar

I have a 1993 Mazda Miata, a blue Ox tow bar and I think a Roadmaster to Demco adapter XL-032 I can send pictures, can you confirm the adapter is compatible with the Roadmaster 711-4? Thanks. | The Roadmaster base plate kit that fits your 1993...

is the Wiggle Room On My Roadmaster Base Plate OK? What are the Outer Holes for on 2001 Mazda Miata?

What purpose do the outer holes that line up between the main braces and the front braces serve? It seems like something should go there to give strength to the connection besides the carabiners, like another linch pin? Also, the front braces...

Supplemental Braking System Recommendation for 2003 Mazda Miata

Can I use the invisibrake on my 2003 Miata? Controller in the trunk and accumulator behind driver seat? Thoughts. | It doesn't look like Roadmaster ever test fit the Invisibrake in a 2003 Mazda Miata so while I can't say for sure I do have...

What is a Complete Flat Tow Package for a 2001 Mazda Miata Towed Behind a 2021 Winnebago Travato?

I am looking for all budget friendly equipment necessary to flat tow my 2001 Miata 6 speed SE behind my 2021 Winnebago Travato 59K. I am also trying to find someone in the Lubbock, Texas area to install said equipment. Can you help? Thanks!...

Does Advent Air RV Air Conditioner System Have Auto Fan Setting

Does the thermostat have Fan Auto setting? i.e. blower is off when cooling is not needed | Hey Jamie! The Advent Air RV Air Conditioner System # ADV23SR only has manual controls for the fan. The AC will kick on and off according to the temperature...

Finding Installer for Curt Hitch on 2009 Kia Rondo

A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...

Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper

I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...

Parts Needed to Flat Tow 1990 Mazda Miata

Hi there! Im looking to setup a flat tow setup for my 1990 Mazda Miata towing behind my 2015 Toyota Tacoma. Looks like I need Roadmaster 711-4 and RM-020. Anything else? I just want to ensure I'm getting everything I need. | In order to...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

How to Determine If the Kwikee 32 Series Steps Will Fit My 2014 Winnebago View?

Will these fit an 2014 Winnebago View? | In order to determine if the Replacement Steps, Motor, and Switch for Kwikee RV Electric Steps # LC3722617 will fit your 2014 Winnebago View or not you're going to first need to make sure that you have...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

Is Trimming or Modification Required to Install Curt Trailer Hitch 11749, 1998 to 2005 Mazda Miata

Will the hitch touch the rear panel. Since panel is somwhat flexible, would it be neccesary to trim the panel for clearance? If so what would be the best way and/or tool to cut the panel? | The Curt Class I Trailer Hitch, # 11749, should not...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

Troubleshooting Blazer Trailer Tail Light C7493RTM That Stopped Working

I have a set of these lights, and everything works except the right-hand side marker. Is it possible to open the case for a possible repair? They seem permanently sealed. | First check to make sure the light is grounded properly. That is typically...

Trailer Hitch Recommendation for a 2000 Mazda Miata and a Bike Rack

I would like to attach a bike rack and the installation drawings show the hitch tilting down with the adapter for a ball mount. I will not have a ball mount. I assume it can be tilted to come out horizontally and still be able to drill? | The...

All Parts Needed to Flat Tow 1990 Mazda Miata

What is required to flat tow a 1990 miata | There are a number of parts needed in order to flat tow your 1990 Mazda Miata, which I'll list for you: - Base Plate Kit: Roadmaster Crossbar-Style Base Plate Kit # 711-4 - Tow Bar: etrailer SD Non-Binding...