bing tracking image

Rondo  x   >   RZR  x   >   RVR  x   >   RX 350L  x   >  

Location Of Curt Wiring Harness Connections For a 2021 Lexus RX 350L Without Tow Package

Where is the 4-pin connectors located on a 2021 Lexus RX350L? I believe I have found the 10-pin connector on the rear driver side as shown in the picture. I cant find any 4-pin connector though. Neither the 10 or 4 pin connectors are under...

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Finding Installer for Curt Hitch on 2009 Kia Rondo

A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...

Trailer Wiring for 2018 Lexus RX 350L Without Factory Tow Package

It is apparent that my car does not have the factory tow preparation since i searched all over the undercarriage during the hitch installation. Does your team have experience with that “L” model. It has rear air conditioning. I am not sure if...

Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper

I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...

Installation of Trailer Wiring Harness on 2018 Lexus RX 350L

118225 I need to know where the plug is underneath the vehicle. 2018 Lexus RX 350L I have plugged in the one inside the vehicle which by the way, says its on the passenger side on the instructions but its on drivers side on vehicle itself....

Recommended Trailer Wiring Harness for 2020 Lexus RX 350L

I need the advice on the trailer wiring for 2020 Lexus RX350L | In order to add a trailer wiring harness to your 2020 Lexus RX 350L you'll want to use the Curt # C56217. |

Trailer Hitch Recommendation that Fits 2018 Lexus RX 450H

Do you have a trailer hitch for a 2018 Lexus RX 450H? | We have the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e49KR as a confirmed fit for your 2018 Lexus RX 450H. I attached the installation instructions...

Where is 10 Pin Connector to Install Trailer Wiring on 2018 Lexus RX 350L

Can you help me to locate the 10 pin connection on my rx 350l please | The 10 pin connector you are looking for to install the Curt trailer wiring harness part # C56217 on your 2018 Lexus RX 350L is under the dash and not the rear cargo area...

Unable to Find the Wiring Harness Connections on a 2021 Lexus RX 350L Without Tow Package

I saw one of you QandA answers by Gregory M to this question and there is a reference to a video link of where to find the 4 pin connector. I am also having trouble locating it. Could you send the link to the video of where to find the 4 pin...

Installation of Curt Trailer Hitch on 2018 Lexus RX 350L

Hi, I am looking at trailer hitch for my 2018 Lexus RX350LNote: not RX350. Do you have an installation video specifically for that particular model? Because this car has a cover on the driver side with very narrow opening. I am wondering just...

Will Curt Trailer Hitch C13394 Fit 2021 Lexus RX 350L and Retain Hands Free Lift Gate Sensor?

will the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13394 fit the 2021 Lexus RX350L? will it not block the kicking sensor? | The Curt Trailer Hitch Receiver # C13394 you were looking at is indeed a confirmed fit for your 2021...

Comparing the Curt Trailer Hitch for a 2019 Lexus RX 350L

I need a hitch for my Lexus RX350L. I would like the hitch is hidden behind the bumper. Also do you have an install video. | Yes, I have attached some photos for you of the Curt Trailer Hitch Receiver part # C13394 installed on a 2019 Lexus...

Trailer Hitch for 2018 Lexus RX350 L

the dealership has not replied with any suggestions on a trailer hitch for the lexus 350 L version due to the extended body length.. have you any update since the last time i contacted you when you confirmed the existing hitches do not fit this...

Trailer Wiring Harness # 118255 Does Not Fit a 2018 Lexus RX350L

i have the trailer wiring kit #118255 to go on 2018 Lexus RX350L without tow package plugs do not match on passenger side behind rear panel. No plug connector under bumper. | I checked with the manufacturer for wiring harness # 118255 and they...

Recommended Wiring Harness for a 2018 Lexus RX 350L Without Tow Package

Please advise on the fit wiring harness/ no factory towing package on my 2018 RX350L Please! Thanks | For your 2018 Lexus RX 350L there are two different styles of wiring harness available if you do not have the tow package. There is the ZCI...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

Wheel Net Recommendation for a Polaris RZR with 27x9R-14 Front Tires and 27x11R-14 Rear Tires

I have a 2012 RZR XP. It has 27-9R-14 in the front and 27-11R-14 in rear for tires. I have put the E-TRACK system on my trailer. I want to know if there is a tire strap that would work. | For your tires, I recommend going with the Erickson Wheel...

Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails

Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...

Trailer Hitch Recommendation for a 2007 Kia Rondo

I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...

Trailer Hitch for a 2018 Lexus RX 450hL

Do you know if this hitch would also fit the 2018 450hl frame? I would guess the frame is the same as for the 350L but my Lexus dealer cant seem to find an answer for me | I do have options for you depending on what you will be using the trailer...

Does Curt Hitch part # C13394 Fit Lexus RX 350L or Toyota Highlander

I would like to install a hitch for my 2018 Lexus RX350L. but I did not see a single picture showing this hitch installed on RX350L | For your 2018 Lexus RX350L the Curt hitch part # C13394 is a confirmed fit. Since your vehicle shares the same...

Wiring Harness With Easy Install For 2009 Kia Rondo

I am interested in the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector for a 2009 Kia Rondo. One of the issues I see in the reviews is that the green wire from the drivers side to the passenger side can be too short....

Filter Your Search