Will Roadmaster Direct-Connect Base Plate Kit Fit with Guardian Rock Guard
I ordered the RM-524435-4 crossbar base plate for my 2013 Ford Flex and the installer installed a RM-524435-5 direct connect base plate and now have no place to mount my guardian rock shield. The dealer checked the shipped box and it had the...
Suspenbsion Enhancement Option For 2018 Ford Flex Limited AWD
Suspension Question: 2018 Ford flex Limited awd Skipping the air suspension would you please advise me what I should have to be able to carry heavy loads in the back and also to safely tow. As a side question to you have any beefier rear anti-sway...
Trailer Hitch Recommendation for 2016 Ford Flex with Dual Exhaust
Hello, Im looking for a hitch to install on a Ford flex 2016 AWD 2 exhausts. just for a 3 bicycle rack or maximum a trailer to town a motorcycle. What do you suggest that I can install by myself without mods on the car. | Hey Gustavo, we have...
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
How Far Will Blue Ox Base Plate Kit Extend Past Grille on 2018 Ford Flex
Installation of a Blue Ox BX2645 towing baseplate. How far should the components extend out in front of the grill? Instructions dont seem to address that for positioning. | I reached out to my contact at Blue Ox regarding the Base Plate Kit...
What Wiring Harness do I Need for My 2015 Ford Flex with Factory Tow Package?
Hello, I’m looking at wire harnesses for a 2015 flex. Our car came from the factory with the factory tow package. Before we bought the car however someone has messed with the factory wiring and so the tow harness does not function. Can I just...
Can 2016 Ford Flex be Towed On Roadmaster Tow Dolly # RM-2050-1
2016 Ford Flex, AWD, 17inch wheels/tires...compatible | Yes, your wheel and tire size is perfectly fine to use with the Roadmaster Tow Dolly part # RM-2050-1 that you referenced. At one point Roadmaster listed this as only fitting up to 16 inch...
Can Weight Distribution be Added to an Aluminum Boat Trailer with an I-Beam Pole Tongue
What do you recommend for chain hangers on an aluminum I-beam tongue? It does not look like the square head tension bolt setups will work properly, and the RP58305 doesnt have the proper vertical plane to bolt on. I cant imagine this being...
Instructions for Yakima Skyline Roof Rack that Fits 2014 Ford Flex
Im interested in the Yakima skyline racks for me 2014 For Flex. Am i able to get pdf of the vehicle specific installation instructions for preview? | Hey Douglas, I attached a link to the install instructions for the Yakima Skyline roof rack...
Which Curt Hitch 2016 Ford Flex with Dual Exhaust
I purchased this hitch which I did not know was for single exhaust. I have 2016 Flex dual exhaust. I tried to return it but it costs more to ship than what I purchased the hitch. Is there a way I can get this hitch to fit 2016 Ford Flex...
Difference Between Wiring Harnesses for a 2009 Ford Flex
Hello, On your website you have multiple 4-pin wiring harnesses that fit a 2009 ford flex. I was looking at Curt Item C56343 and HM11140275 from Hopkins. The Curt system has an aux 12v wire to the battery while Hopkins does not. I only plan...
Recommended Roof Rack for 2020 Ford Flex with No Side Rails
I have a rooftop cargo box that I used on my old Nissan Pathfinder that I'd like to be able to use on my 2020 Ford Flex. It doesn't have any of the side rails on it. Is there a roof rack that I can install that will allow me to use my old box...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Recommended Roof Rack for a 2011 Ford Flex w/ Raised Rails
good morning Im interested in these products for my 2011 Ford flex..My question is how much of actual bar length is available for use? I like the low profile but I have a canoe about 39 in wide and not sure if I can use these or better off opting...
Locking Roof Rack For 2019 Ford Flex With Factory Raised Rails
Good day, I have the factory raised rail that goes the length of the roof. Would you tell me please what locking roof rack and locks i would need? Thank you | Hello Kevin, thanks for reaching out. I see that you were looking...
Recommendation for WD/Sway Control for 2007 Fleetwood Saratoga and 2010 Ford Flex
Im new to this and need your help...This is what I have: 1-2010 Ford Flex with factory tow package, 4500lb max tow 450lb max tongue. 2- 2007 Fleetwood Saratoga 3500lb GVRW, 345lb UTW. Im not sure the max tongue weight, Ive see anecdotes as...
Parts Needed to Flat Tow 2011 Ford Flex With 2015 Winnebago Vista 36Y
What base plate, towbar, braking system, and other wiring do you recommend for a 2015 Winnebago Vista 36Y gasoline towing a 2011 Ford Flex Non Ecoboost? | Hey Mark! I would be happy to get your set up to flat tow your 2011 Ford Flex with your...
Will Trunk Mounted Bike Rack on 2017 Ford Flex Work When Towing Camper?
Hi.....looking at ALL option for carrying bikes while towing a popup camper. Looking at the Carlson bunk then a bike hitch option.....but then kinda thought about this option as well. 2017 ford flex with a rockwood 2516g. The hatch option...
Parts Needed To Flat Tow a 2011 Ford Flex Behind a 2013 Winnebago Tour Motorhome
What do I need to flat tow a 2011 ford flex behind a winabego 2013 tour 42qd | First Dave, you will need the Base Plate # 4421-1 to mount to the front of your 2011 Ford Flex. This will allow you to connect to your 2013 Winnebago Tour 42QD using...
Recommended Trailer Hitch For 2014 Ford Flex V6 With Dual Exhaust
Hello I got a 2014 ford flex v6 dual exhaust what is the best non expensive hitch you recommend thanks | Hello Eric. For your 2014 Ford Flex V6 dual exhaust I recommend the etrailer Class 3 Hitch # e52AR. This has a 2" receiver and is rated...
What Is The Typical Brake Controller Pin Location For A 7-Way?
Our company has a dozen gooseneck and bumper pull trailers wired with a 7-pole round plug and the company has added a socket on the trucks and wired in from the 7-blade socket. My question is: can the brake controller wire from the 7-blade...
Locking Hitch Pin for the Curt 2 Bike Platform Rack Part # C18085
Hello. I purchased the Curt Tilting 2-Bike Rack # C18085. Im looking for a compatible anti-rattle hitch pin that offers locking capability for it. Ive tried the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 1-1/4inch and Combo...
Does Yakima SkyLine Roof Rack Fit Factory Mounting Holes On 2010 Ford Flex
Do I use the existing holes below my rubber that would have be used had I had original side rails? My car is a bare roof 2010 Ford Flex. Are the cross bars 60inch or us there additional overhang? | Hey Ladd! The Yakima SkyLine Roof Rack # Y54WB...
4-Way Wiring Harness for 2015 Ford Flex
Hello, I’m looking at wire harnesses for a 2015 flex. Our car came from the factory with the factory tow package. Before we bought the car however someone has messed with the factory wiring and so the tow harness does not function. Can I just...
Filter Your Search
Contact and Help