Tonneau Compatible Ladder Rack For 2025 Rivian R1T With OEM Tonneau Cover
2025 R1T I am 5 4. looking for a ladder rack options the work with the Rivian Tonneau cover that rolls with the bed rail button. and the tail gate button and also the side cargo buttons. please help with information and options. | Hey Dave,...
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Replacement For 24 Inch 3,500 lb Leaf Springs & Equalizer Upgrade
I have a 2001 timberland timberlodge. It has a GVWR of 7400lb. I want to replace the leaf springs. It has 3 leafs per set. Can you recommend a complete kit for it? The springs are 24" on center. This is a tandem axle. They are rated at 3500lb....
Location of Fill Ports on Valterra RV Water Tank
How can you fill this? I don’t see a fill port. Or does it require a pressurized water supply? | Hi Elliott; the Valterra RV Water Tank # R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture,...
Will Maxtrax Mounting Brackets Fit Rivian Cargo Crossbars
Will this fit Rivian Cargo Crossbars? | Hey Philip, thanks for reaching out! The Maxtrax Mounting Brackets # MA92PR were designed around the Rhino-Rack Vortex crossbars so as long as the T-Slots for your Rivian crossbars are similar to the...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Replacement Fender for Shorelander SLR80TAL
Looking for replacement fender options for shorelander slr80tal dual axle boat trailer. Vin 1mdavp0234a266485. Only need one fender preferably aluminum smooth finish | Hey Alan, we do have one smooth aluminum tandem axle fender setup with the...
Recommended MouseBlocker Deterrent Systems for Protecting Stored Cars
I have a 2016 dodge challenger that is kept in a storage shed in my backyard. Of course I have a mouse problem. Do I need two units as they are active under the hood, but build nests in the trunk, or will one unit in the car take care of both...
Will Adarac Aluminum Series Custom Truck Bed Ladder Rack Match 2022 Rivian R1T Roof Rack Height
I have a 2022 Rivian R1T. Does your rack height by chance match the factory rack height on the cab in case I wanted to use both? Thanks! | Hi Allen; I'm not sure what the factory roof rack height is on your 2022 Rivian R1T, but I can tell you...
Trailer Hitch For 2023 Dodge Challenger GT AWD
Hello, Looking for a trailer hitch for a 2023 Dodge Challenger GT AWD. What is the difference between Quad Tip Exhaust and non Quad Tip Exhaust? | Hello Stephen. For your 2023 Dodge Charger GT AWD I recommend the Curt Class 3 Hitch # C13236....
Is There a Way to Adapt Yakima Raptor Bike Rack to Crossbars with Channels
Hello, I have a pair of the Yakima Raptor bike carriers and Id like to mount these on the factory cross bars on my Rivian R1T. The bar size and shape dont seem to be compatible with the universal mighty mount. So Im thinking I can use the tslot...
Ladder Rack that Fits 2025 Rivian R1t
Does it fit on a 2025 Rivian R1T, and how is it installed with a tonneau cover? Any drilling involved? | Hey Tammy, we don't have any tonneau covers for your 2025 Rivian R1T that have the needed channels to use the Truxedo Elevate Ladder Rack...
How Does Adarac Aluminum Series Ladder Rack A33VA Fit with Tonneau Cover
Hi, I own a 2022 Rivian R1T, with a power tonneau cover. After reading your materials, Im still not 100 sure of how the Ladder Rack mounts to the truck bed? Im seeing no drilling is needed great!, but wasnt totally sure if the tonneau cover...
Will etrailer Anti-Rattle Device part # e38FV Fit Rivian Hitch
Do we know if this product will work on the Rivian hitch given its hidden, and fairly deep sunken? | Hey JZ, I would have to see the hitch but basically it would need to have a lip/collar around the outside of the hitch for the etrailer anti-rattle...
Will Curt Multi Fit Hitch C13900 Fit A 2019 Dodge Challenger?
Hello. Can you tell me if the Multifit Class III Model C13900 will fit my 2019 Dodge Challenger without having to loosen rear mufflers/exhaust system? I am hoping I can just bolt on without having to loosen anything on the vehicle? Thx | Hello...
Can The Rhino-Rack Roof Rack For Tracks Be Installed On Rivian Factory Mounting Points
Hi. I have a 2022 Rivian R1T Will the RhinoRack crossbars work for my factory bed top edge attachment points? Thanks, Nick | Hey Nick, The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT uses an M6 24x24x4 Nut to mount into...
Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
What Does Curt Trailer Hitch C13236 Look Like Installed on a 2017 Dodge Challenger
Id like to see some video or at least stills of how the CURT hitch looks on the current Dodge Challenger. Thank you. | I have included a picture showing what Curt trailer hitch # C13236 looks like installed on a 2017 Dodge Charger. I think that...
Recommended Weight Distribution Hitch for a 7,000 lbs Short V Nose Trailer
This is a follow-up question to Adam R and your response to him. My trailer looks exactly the same as his picture...only about 15 inches of exposed frame between the center of the ball and the V Nose trailer wall. The side walls cover the side...
Can You Use a 2" Hitch Extender When Towing to Let Tailgate Down
I have a Rivian R1T electric truck. I also have a brand new Forest River Rockwood 2318G pop up camper that weighs 2600 dry, maybe 3500 lb with water and belongings. My issue is Id like to extend the hitch by 24 so I can put the tailgate down...
Will the Trailer Hitch for a 2019 Dodge Challenger Work with Aftermarket Exhaust
hello. i have 140649 borla exhaust installed. will this trailer hitch fit? | In order to install a trailer hitch on a 2019 Dodge Challenger with aftermarket exhaust, the best option we have for you is the Curt Trailer Hitch Receiver part # C13236...
Would I Be Able to Mount a Kuat NV 2.0 Base Bike Rack On My 2013 Dodge Challenger
Would Kuat NV base rack configured for 3 bikes work with this hitch for a non-quad-exhaust 2013 Challenger R/T? Would I need a high-low adapter to raise the rack? | Hey, Denis! That’s a great question, I’m glad you asked, because both clearance...
How Big is the Clamp on Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent
what is the opening of the Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent? to fit over a truck cross car brace. | I reached out to Yakima and found that the opening for the Replacement Mounting Bracket for Yakima SkyRise Rooftop...
Heavy Gauge Wiring For Lighting Functions on Trailer
Looking for a heavy wire gauge, 4-prong trailer wire connector set about 16 foot long. This will go on a simple open 3-rail motorcycle trailer. Im tired of the cheap flimsy Chinese wire sets always corroding from the inside out. Any help would...
Filter Your Search
Contact and Help