Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22
Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?
For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...
Will the Thule Roof Mounted Cargo Basket # TH859XT fit a 2010 Dodge Nitro
Help..Looking on line at the Thule roof mounted cargo basket. Will it fit on 2010 Dodge Nitro??? I will be carrying a 12 ft kayak and 10fooot 6inch kayak. Ive had failed attempts of roof carriers. Dealer wants a arm and a leg. Thank you....
Parts Needed to Flat Tow 2010 Dodge Nitro
I have a 2010 Dodge Nitro. SE 4x4, and I need to get a tow bar bracket. Thatll work so I can use a quick connect toe bar. I dont know what to purchase where to purchase or how to hook up the wires. so I can tow behind motothome. Do i need to...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?
Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...
How to Tell if Power Mountain Tallboy Off-Road Bottle Jack Will Work with a 2023 Rivian R1S
what jack can you recommend for changing tires on my Rivian R1S 2023 and Intech Sol Dusk Rover off road package travel trailer? Will the Tallboy pm34fr work with a Rivian puck? | Hey Darin, thanks for reaching out! The Power Mountain Tallboy...
Will etrailer Spare Carrier # e98ZR Work with Rivian R1S 20
Does this fit a rivian r1s 20 inch all terrain tire? 275 / 65 / R20 | Hey John, yes the etrailer spare tire mount part # e98ZR that you referenced will work with the wheel and tire Rivian R1S 20 inch all terrain tire that you referenced. |
What Gauge Wire Runs To The Battery On The Curt 4-Way # C56334?
What size wire runs to battery? | The Curt T-Connector Vehicle Wiring Harness # C56334 is going to come with a 12 gauge wire to run from the converter box to the battery. |
Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
How Do You Attach The Wiring Socket To The Front Of The Blue Ox Base Plate On a 2007 Dodge Nitro?
I just received my base plate. Circled In the picture, Ive seen the 6 round hole wire mounted here. I dont see threads in the hole. What do in use to mount or is this not a mount? Thanks | The Blue Ox 6-Pole, Round Pin, Trailer Wiring Socket...
Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...
2012 Dodge Nitro Trailer Hitch and Bike Rack Recommendations
I need a hitch and bike rack for my 2012 Dodge Nitro. What do you recommend? | I recommend using the etrailer Trailer Hitch Receiver # e83KR for carrying a bike rack on your 2012 Dodge Nitro because it has a matte black finish to help match...
Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215
I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...
4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo
HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...
Leaf Spring Suspension Recommendation for 42 x 48 inch Trailer
Second one Ive owned and the suspension with the slipper springs is horrible and bounces all over. Before I put this one together Id like to see whats needed to change the slipper to a shackle type with double eye springs to try and help smooth...
Trailer Hitch Recommendation for 2007 Dodge Nitro
Which is better for my 2007 Dodge Nitro, easy installation,and pull trailer with mower? | Both the Curt # 13334 and the etrailer hitch # e83KR are very easy to install and are virtually identical hitches except for the finish. The Curt # 13334...
Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine
my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...
Can Jeep Liberty Hitch Fit 2011 Dodge Nitro
Hi I have a 2011 dodge nitro and I need a hitch Ive been looking and I see that a jeep liberty hitch has a higher rating of 7500 lbs weight distribution to the nitro hitch of 6000. Now I will generally be towing light but I am a race car mechanic...
What Size Bolts are Used for Curt Trailer Hitch Receiver for 2008 Dodge Nitro
What length and size bolt is needed for hitch assembly for a 08 Dodge Nitro SLT frame? | According to the linked installation instructions the bolts are M12-1.75 x 45mm, although these do come with the Curt Trailer Hitch Receiver # 13334. If...
Weight Distribution Recommendation for a 2010 Dodge Nitro and Max Towing Capacity for Dodge Nitro
I m buying a 2005 Jay flight camper I think it weights around 7600. Hopefully my 2010 Dodge nitro 3.7 v6 4x4 can pull this. However I need to know what kinda hitch and sway bar that I would need. Thanks for any advice! | I checked the owner's...
Replacement E009 Key For Mopar OEM Roof Rack on 2009 Dodge Nitro
I need a replacement key for my dodge nitro factory roof racks E009. Do you have something to fit? | Thule made those racks for Mopar, so the Thule # THKEYN009 would be the correct replacement. The older lock cores were just a little shallower...
Is There a Difference Between Brake Assembly Part # AKFBBRK-35-D, AKFBBRK-35R-D and # AKFBBRK-35L-D
Can you explain the differences between? AKFBBRK-35-D AKFBBRK-35R-D AKFBBRK-35L-D They appear to be all the same assemble just separate or in the pair, am I correct? | You are correct. We sell the assemblies as a pair as part # AKFBBRK-35-D...
Filter Your Search
Contact and Help