Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Inner Diameter of Boat Trailer Guide-On Roller
What is the actual diameter of the hole for the roller shaft. It’s made for use with 5/8” roller, but does the shaft fit tight or does the roller rotate on shaft? | Hi Harrison; it will be a snug fit since the actual inner diameter of the opening...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
What Trailer Hitch Will Fit The 1985 Chevy Caprice And Can It Be Used To Tow?
searching for a hitch of 2in receiver, but the search showing the 1 1/4.. only,, the question is,, the 1 1/4 can will towing a car, ?? I have 1985 Caprice wagon, my plan is to towing a 1980 caprice, Im moving out of california.. | Hello,...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Trailer Hitch Options For A 1979 Chevy Caprice Wagon
Hi Will this model fit for 1979 Caprice wagon? | Hi Carston, The Curt Trailer Hitch Receiver # C12009 is listed as a fit for sedan models only. It looks like we unfortunately don't have a custom-fit option for a wagon model so you'd have to...
Catalytic Converter For A 1996 Chevy Caprice Classic SS with the 5.7 Liter 350 V8
What type of Catalytic Converters fit my 1996 Chevy Caprice Classic SS/ 350 engine? | Hi Carmelia, sweet car! I always wanted one of the Roadmaster wagons. Things are cool. : ) The MagnaFlow Heavy Metal Loaded, Stainless Steel Catalytic Converter...
Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...
Is There a Class III Hitch for a 1994 Chevy Caprice
I am interested in buying a class III hitch for the above mentioned vehicle. My Caprice has the LS-1 engine designation 5.7L. According to the owners manual GM says it is capable of towing 5,000 lbs. with a weight distribution hitch. That is...
Is There a Trailer Hitch for a 1992 Cadillac Brougham
Hi i am looking for a class III hitch for a 1992 Cadilliac Brougham 5.7l Thanks | I may have an option for you but there aren't any custom fit trailer hitches for a 1992 Cadillac Brougham. Therefore, in order to attach a trailer hitch you'll...
Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215
I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...
Trailer Hitch Receiver to Fit 1994 Chevrolet Caprice Police Model
Will this hitch fit a 94 Chevrolet caprice police model | Curt offers Trailer Hitch, # C12009, which was designed for the Caprice Sedan and will work with the police model. This is a Class II hitch with a 1-1/4 inch receiver opening. If you...
4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo
HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...
Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine
my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...
Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross
I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |
Trailer Hitch Options for a 2004 Isuzu Rodeo with Spare Tire Mounted Underneath
Can I install a trailer hitch with the spare tire mounted underneath on this model. It is a 2 wheel drive. | Yes, there are trailer hitches available for the 2004 Isuzu Rodeo that have the spare tire mounted underneath the vehicle. I have included...
Hitch and Bike Rack Recommendation for a 2000 Isuzu Rodeo
This rack is recommended by your site for the 2000 Isuzu Rodeo, My vehicle has a small spoiler above the back window and cargo rails on top. The spare tire is mounted below the vehicle. We purchased a new mens Diamondback Edgewood and womans...
Is There a Difference Between Brake Assembly Part # AKFBBRK-35-D, AKFBBRK-35R-D and # AKFBBRK-35L-D
Can you explain the differences between? AKFBBRK-35-D AKFBBRK-35R-D AKFBBRK-35L-D They appear to be all the same assemble just separate or in the pair, am I correct? | You are correct. We sell the assemblies as a pair as part # AKFBBRK-35-D...
What Hitch do You Recommend for My 1987 Chevy Caprice Sedan?
looking for bolt in class-3 hitch | While we do have a great hitch option for your 1987 Chevy Caprice, we do not have any Class III hitches that fit. With that being said, your best and only option is to use the Curt Hitch - Class II - 1-1/4"...
Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails
Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...
Does Duton-Lainson Hand Winch # DL15103 Require Cable Fastener # DL24361 to Secure the Cable
With the above listed winch, do I also need to get item # DL24361 to secure the cable to the winch, or does this come with it. Thanks | Yes, you would need to get the Cable Fastener, # DL24361, to secure the cable to the winch. The winch will...
What is Total Weight of Westin Fey Diamondstep Rear Bumper Custom Installation Kit # 65000-95700
what is the total kit weight? | The Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 65000-95700 that you referenced weighs a total of 49 lbs. |
Will The Draw-Tite Hitch Cargo Carrier # 6502 Clear The Rear Swing Door On My 2004 Isuzu Rodeo
I have a 2004 Isuzu Rodeo with a swing out rear door. I have 8-1/2 from the top of my receiver hitch to the bottom edge of my rear door and want to confirm that when opened, it will clear the top edge of the carrier while in the down position....
Filter Your Search
Contact and Help