bing tracking image

Rabbit Pickup  x   >   R-Class  x   >   Rabbit  x   >   Quest  x   >  

Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel

I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...

What is Available to Increase Height of Scooter Carrier for 2017 Nissan Quest?

My hitch on my van is too low for my mobility scooter carrier and it drags. I need something to increase the height of where I slide my carrier into the 2 in receiver on a 2017 Nissan Van. Need to increase the height of the front of the carrier...

Solution for Needing Replacement Converter Box for Tekonsha Trailer Wiring Kit 118547

My circuit board that sits in the black box/converter got water in it and shorted out. I am trying to find the black box itself without having to buy a whole new set of wiring. Is there anyway you guys would have it available? I have attached...

Trailer Hitch for 2017 Nissan Quest

Will this model fit a 2017 Nissan Quest? It is confirmed for a 2016 and I dont think the bodies have changed since 2011. | There is a fit for a trailer hitch on a 2017 Nissan Quest. I confirmed with Curt that if your '17 Quest is a Platinum,...

Solution for Roof Rack on 2011 Nissan Quest With Naked Roof

2011 Nissan quest with NO factory roof rails is there a roof rack system available? | Hi Chris; since you don't have the raised rails the only option is a universal roof rack. A van like your Nissan Quest has sliding doors which is why your...

Tow Bar for 1981 Volkswagen Rabbit Pickup

What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...

Brake Controller Recommendation for a 1996 Nissan Atlas 150

I have a Japan 1996 Nissan atlas 150 I’m looking for a trailer brake controller and you don’t have this model as an option can you help me out? | Hey Tangen, thanks for reaching out! While I don't have the details on your 1996 Nissan Atlas...

Dimensions of the Pro Series Round Pipe Mount Swivel Jack with Footplate

Hello, We are considering incorporating this jack into the product that we are developing. Can you provide a basic dimensional drawing of this part? Thanks | I went to our warehouse to provide you a few measurements of the Pro Series pipe...

Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103

do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer

Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...

Can Electric Over Hydraulic Actuator Be Run Through 7-Way Trailer Connector

Since this is hardwired into the battery, will it power the brake actuator on a camper if I use a 4-flat to 7-pin converter with a brake controller in the middle? | The power for an electric over hydraulic actuator will need to pull power from...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

How to Position Bikes When Loading on Swagman XTC2 Bike Rack # S64671

What directions should 2 bikes be loaded on an xtc2 swagman bike rack? | With the Swagman XTC2 TILT Bike Rack # S64671 you are able to load the bikes in either direction. It is recommended to always load the heavier of the 2 bikes first to reduce...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103

I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....

Trailer Hitch for a 2012 Mercedes R350 BlueTec

Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...

How to Reduce a Bouncing Bike Rack Installed on a 2004 Nissan Quest

I have the Hidden Hitch class III on my 2004 Nissan Quest along with the 5 bike Thule hitch carrier and Thule hitch lock. The carrier bounces when we hit a dip in the road, go over a bridge, etc, sometimes violently, when on the interstate with...

Wiring Diagram for the Curt Trailer Wiring Harness Part # C56175

can you email wiring diagram for proper connecting of wiring of curts adapter on 2004 quest | I really wish I had a diagram specific to your 2004 Nissan Quest that shows how it would install, but the best I can do is show you a diagram that...

Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103

Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...

Solution for Sagging Rear Suspension on a 2011 Nissan Quest While Towing

looking for air spring helpers for 2011 Nissan Quest. I need to raise the rear end to keep hitch from draging | I have a great solution for you, but at this time we don't have air suspension available for your 2011 Nissan Quest. Since it sounds...

In What Order Should You Load Bikes On The Swagman XTC2 TILT Bike Rack

What is the best way to load two bikes on new swagman bike rack? Larger bike first? Xtc2 | You always want to load the heavier of your 2 bikes first and closet to the vehicle on the Swagman XTC2 TILT Bike Rack # S64671 or any other hitch mounted...

Filter Your Search