Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
Parts Needed to Tow Tent Trailer With 2011 Mercury Mariner
Hi! My tent trailer has a 7 pin plug. I am looking to install a hitch and proper wiring on a 2011 Mercury Mariner without trailer tow package. All I see are 4 pin kits. Do you have any suggestions??? Thanks! | The wiring you will need for your...
Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel
I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...
How Are the Bearings in the Malone LowMax Trailer Greased and Re-Packed
How do you gtease the bearings and how often is this needed to prevent mishap on the road? | The Malone Low Max trailer has a removable hub, so you'll be able to pull it to access and remove the bearings; we've actually done a helpful video...
How to Clean Out a Freshwater Tank and Lines on an RV or Trailer
How to clean out the fresh water tank for use. | It depends on the type of freshwater system you have in your RV or trailer. There is likely a specific procedure outlined in the literature for the RV/trailer that you will need to follow. If...
Recommended Spare Tire Cover For A 4.80/4.00-8 Trailer Tire
Please recommend a spare tire cover that will fit one of these without flapping in the wind! | With the Taskmaster 4.80/4.00-8 Bias Trailer Tire # AM30000 having a diameter of 16.1 inches when fully inflated, we will not have a perfect fit for...
Differences Between the Voyager and P3 Brake Controller
Hi, I currently have a Tekonsha Voyager brake controller unit. I just purchased a new 15 Jeep Grand Cherokee and will need to install a new brake controller on that vehicle. Can you explain the main differences between the Voyager model and...
Can Thule Hullavator Pro Fit on Square Malone Crossbars
Hi! I love this site!!! I want to purchase the Hullavator Pro, and I currently have 50” malone square crossbars on my ‘06 Mercury Mariner. Can my crossbars accommodate the Hullavator pro? Thank you! | Yes, the Thule Hullavator Pro # TH898 can...
Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103
do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Installing Trailer Wiring Harness in 2009 Mercury Mariner Without Factory Tow Package Wiring
My 2009 Mercury Mariner did not come with a hitch. However, it has the wiring adapter at the back of the vehicle. And, the power distribution box has the spaces for the three tow relays needed to power the wiring adapter. But, when I tried...
Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer
Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Does Curt Universal Installation Kit # C57186 Include Wiring to Activate 12V Pin on 7-Way
Does this allow me to charge the battery on my trailer while Im driving? | If your vehicle is equipped with a 4-Way connector, the Curt Universal Installation Kit # C57186 that you referenced includes everything needed to convert it to a fully-functional...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Can you Upgrade the 1974 Shasta Camper's Rims
I have a 1974 14 ft Shasta camper and I was going to replace the rims and tires the original ones are 13 in and I was wondering if I could upgrade to a 15 inch tire and rim I do have some clearance around wheel well but I wasnt sure if they...
How to Order Replacement Installation Hardware for a Trailer Hitch
I am looking for a hardware kit to install a draw-tite trailer hitch #75751 on my 2009 Mercury Mariner. Do you carry them? Will this model # work on my Mariner? | The Draw Tite Hitch part # 75751 that you referenced has been confirmed to fit...
Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103
I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....
Trailer Hitch for a 2012 Mercedes R350 BlueTec
Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...
How to Hardwire a Trailer Connector on a 2008 Mercury Mariner
I have a 2008 Mercury Mariner w/ backup sensors, however the sensors have not worked for sometime and I have no real use for them. The description states that I must use Modulite wiring harness 118551 and connect directly to the taillights or...
Can a Tandem Axle Trailer go to a Single Axle
I am looking at purchasing a used 5x8 dual axel utility trailer. One of the axels is broken. Can I convert the trailer to single axel? I dont plan on hauling over 1000 pounds. | If you are absolutely sure you wouldn't exceed the capacity of...
Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103
Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...
Filter Your Search
Contact and Help