Rabbit Pickup x > R1S x > Rabbit x > Element x >

Result:

Articles

Replacement Steps for SCS/Frigette 733-0074 On RV

My steps on my 2008 Monaco Dynasty Renaissance IV are in need of replacement. The motor still seems to work, the frame/steps are bad. What lippert model is needed? Is it available without the motor? If not, what stair system is the right fit? Steps...

Flat Towing Set Up For A 2007 Honda Element EX

I am looking for a flat tow package for a 2007 Honda Element EX. Could you please put together a list of one with a clevis pin base plate and your invisi- brake system? | Hi George! I can definitely get you a full flat towing set up for your...

Is a 1-1/4 to 2 Inch Trailer Hitch Receiver Adapter Recommended for Use with a 2 inch Cargo Carrier

I have the following carrier from Harbor Freight tools: Description of Haul-Master 92655 Fits your 2 hitch receiver Would you recommend or discourage use of a 1.25 to 2 adapter with this hitch? | I would discourage the use of an adapter for...

Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22

Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...

Replacement Clips for Thule AirScreen XT Fairing 8537361

Hi there, I recently switched from square bars to aero bars and my Thule XT wind fairing clips need to be swapped over. I found part number TH22NH which states in the informational video that the older model, which I have, needs part 8537361....

Trailer Hitch and Wiring Recommendation for 2006 Honda Element

Hi. I need info on stuff I need to install trailer harness lights. And hitch for class 3 | Hey Delia, we have the Curt 4-way harness part # C59236 which his a confirmed fit for your 2006 Honda Element and would be a great choice for trailer...

Will the 2005 Honda Elements Frame Need to Modified to Install the Roadmaster MX Base Plates

Im considering putting a Roadmaster #1541-5 Baseplate on my 2005 Honda Element. My question is do I have to alter/cut any part of the frame or factory metal to make the install. I realize I have to trim part of the plastic grill fascia, but...

Flat Tow Setup for 2003 Honda Element With NSA Tow Bar

Im setting up a toad 2003 Element, NSA tow bar and also wiring it for trailer lights. Is there a kit? | Hey Steve! We don't have a kit but I can put the parts together for you. Do you already have the tow bar or are you looking for an NSA one...

Can Older Style of Thule Fairing Be Adapted to Fit OEM Crossbars

2006 Honda element, stock roof rack. Picked up a used Thule wind fairing with square clips. Will these clips work for my vehicle? | There might be a way to make it work but those clips are for the newer style of fairing and not what you...

Can Napier Sports SUV Awning Work with 2010 Honda Element Tailgate Down

How does the zippered entry/door interact with the lower tailgate on a Honda Element? Will it still work with the tailgate down? Thank you for your time. | Hey Steven, there is enough slack in the material of the Napier Sports SUV awning part...

Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?

For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...

What Rechargeable Battery do I Need for My Custer Wireless LED Tow Light Bar?

i need a battery for my 23inch custer lite on tow light how much doe it cost and where do i get it? | Hello Denny, My apologies for the delay, getting this battery added to our site took a little more time that expected. You will want the Replacement...

Is There Roadmaster Base Plate Kit for 2008 Honda Element that Works with Roadmaster EZ Chain Kit

Can the Roadmaster EZ hook safety cables be used with the Roadmaster Direct connect base plate 1541-5? I have a Sterling tow bar and use the EZ hook cables but need to set up a HONDA element for towing. Thanks | Hey Harold, the Roadmaster...

Is Fascia Trimming Required to Install Trailer Hitch Receiver on a 2008 Honda Element SC

part #c11699 for 2008 Honda Element SC states fascia trimming required, but there is no where in the installation that explains this. What does this require? Thanks. | There is some fascia trimming required for the SC model of the 2008 Honda...

Base Plates for 2007 Honda Element With Falcon Tow Bar

Base plate Honda Element. I have all the connections for a Falcon 5250 tow bar except the base plate. Can I just purchase the base plate which was sold with my car instead of being removed? | In order to use your Falcon 5250 tow bar to flat...

Need Base Plate And Flat Tow Parts For 2004 Honda Element

need flat tow base plate for 2004 honda elementdo you stock blue ox bx2232? to adapt to tow bars , are adapters needed/available? | Hello Ron, thanks for getting in touch. Yes, we do carry the Blue Ox Base Plate # BX2232 which is the correct...

Flat Towing Dinghy Setup for 2008 Honda Element with Base Plates and Tow Bar

2008 element need base plate and tow bar | For your 2008 Honda Element, I recommend the Roadmaster XL Base Plate Kit, # 1541-3. This kit will also work if your Element is the SC edition. I love the hidden bracket design and easily removable...

Is There A Trailer Hitch For 2007 Honda Element SC?

Where did you guys end up landing with tow hitch possibilities for the 2007 Honda Element SC specifically? I just bought one. Exploring options. | Hello Ron, thanks for reaching out. We do offer one hitch for the 2007 Honda Element SC. For that...

Trailer Hitch and Wiring Recommendation for 2005 Honda Element

I have a 2005 Honda element I need a trailer hitch and wiring harness for. It has a connector in the spare tire wheel well if that’s helpful. Please provide me with the hitch and harness I would need to tow a trailer. Thank you | Hey Todd, for...

Are Leaf Springs Above or Below Axle on 2,000 lb Trailer Axle With Idler Hubs e84YR

regarding: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60 Long - 2,000 lbs Is this axle installed above or below the springs. | Hi Donald, You'll install the leaf springs below the 2,000 lb, 60" long Trailer Axle with Idler Hubs...

Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?

Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...

Filter Your Search

Vehicle Year

Vehicle Make

Vehicle Model

Brand

Contact and Help

Customer Service
Contact Us
My Orders
About Us
Privacy Policy
Your Account Login

What our customers are saying:

Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!

Ryan

Portland, OR

About Us