Does Yakima FullBack Trunk-Mounted Bike Rack Fit 2020 Mazda CX-30
Just trying to find out if you know if the yakima fullback bike rack will mount on my 2020 mazda cx-30? thanks so much. | I can absolutely confirm for you that the Yakima FullBack trunk-mounted bike rack will fit your 2020 Mazda CX-30. I confirmed...
Trailer Hitch Receiver Fit for 2020 Mazda CX-30
IS there a trailer hitch receiver fit for the 2020 Mazda CX-30? Just for a bike rack for me. | There is a trailer hitch receiver that fits your 2020 Mazda CX-30, the Curt Trailer Hitch Receiver # C49CR. This is a bolt-on installation that doesn't...
Can I Get the Mounting Hardware Through the Side of the Frame Instead of Making Middle Hole Bigger?
I have a 2023 Mazda CX-30 Turbo. In the EcoHitch installation video, a hole on the side of the frame rail is used to get the mounting hardware into the frame rail. Can this hole be also be used as access for the Curt mounting hardware to avoid...
Is There a Minimum Hole Diameter Needed to Install 2025 Mazda CX-30 Curt Hitch Mounting Hardware
What is the minimum diameter hole required to fish the mounting hardware through the frame and in place? | Hey Brad, thanks for reaching out! Curt doesn't list out a specific hole size for the hardware when installing the Curt Trailer Hitch...
Recommended Trailer Hitch For A Toyota Corolla Hatchback
Hello, The Corolla cross and Corolla hatchback hitch mounting brackets look very similar. Is there any way you guys could tell me if dimensions between the two are the same or are they different? I want a 2” hitch for my Corolla hatchback for...
Will Rhino Rack Nautic 581 Fit Top Channels of OEM Bars of 2022 Mazda CX-30
To try and avoid fitment issues, I ordered genuine Mazda cross bars for my 2022 Mazda CX-30 that has roof rails installed. These cross bars are the channel type bars. I was not able to find specs showing the width of these bars and they are...
Location of Fill Ports on Valterra RV Water Tank
How can you fill this? I don’t see a fill port. Or does it require a pressurized water supply? | Hi Elliott; the Valterra RV Water Tank # R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture,...
Will A Non-Powered Trailer Wire Harness Converter Still Allow Factory Light Signals Through
Will the original vehicle taillights work without powering the converter module? Longer context: My car is 2021 Mazda CX-30. I am considering doing the installation by myself, but I dont like the idea of routing the power cable underneath the...
Installation Instructions For EcoHitch Hidden Trailer Hitch Receiver On 2023 Mazda CX-30
Hey, may I get an installation manual that includes the steps and a parts list before I purchase this product. Thanks! | I sent you a separate email with the instructions for installing the EcoHitch Hidden Trailer Hitch Receiver # EH55VR on...
Will Adarac Aluminum Series Custom Truck Bed Ladder Rack Match 2022 Rivian R1T Roof Rack Height
I have a 2022 Rivian R1T. Does your rack height by chance match the factory rack height on the cab in case I wanted to use both? Thanks! | Hi Allen; I'm not sure what the factory roof rack height is on your 2022 Rivian R1T, but I can tell you...
Tonneau Compatible Ladder Rack For 2025 Rivian R1T With OEM Tonneau Cover
2025 R1T I am 5 4. looking for a ladder rack options the work with the Rivian Tonneau cover that rolls with the bed rail button. and the tail gate button and also the side cargo buttons. please help with information and options. | Hey Dave,...
Ladder Rack that Fits 2025 Rivian R1t
Does it fit on a 2025 Rivian R1T, and how is it installed with a tonneau cover? Any drilling involved? | Hey Tammy, we don't have any tonneau covers for your 2025 Rivian R1T that have the needed channels to use the Truxedo Elevate Ladder Rack...
Will etrailer Anti-Rattle Device part # e38FV Fit Rivian Hitch
Do we know if this product will work on the Rivian hitch given its hidden, and fairly deep sunken? | Hey JZ, I would have to see the hitch but basically it would need to have a lip/collar around the outside of the hitch for the etrailer anti-rattle...
Replacement Fender for Shorelander SLR80TAL
Looking for replacement fender options for shorelander slr80tal dual axle boat trailer. Vin 1mdavp0234a266485. Only need one fender preferably aluminum smooth finish | Hey Alan, we do have one smooth aluminum tandem axle fender setup with the...
Does the Stallion Aluminum Roof Mounted Cargo Basket 288-09200 Have a Fairing?
I am interested in purchasing part 288-09200. Just wondering if there is a wind fairing available for the front of it. | Hey Patrick! There isn't a fairing specifically designed for the Aluminum Roof Mounted Cargo Basket item # 288-09200. I...
Exhaust on 2021 Mazda CX-30 Rattling Against Hitch
I bought a hitch for my Mazda cx30 through your site. 1 I had a garage put it on but my car now is making a rattling sound and sounds like its hitting the muffler. Is that normal or thought? 2 what best recommondations do you have for a ebike...
Is There a Way to Adapt Yakima Raptor Bike Rack to Crossbars with Channels
Hello, I have a pair of the Yakima Raptor bike carriers and Id like to mount these on the factory cross bars on my Rivian R1T. The bar size and shape dont seem to be compatible with the universal mighty mount. So Im thinking I can use the tslot...
Installer for Thule Hullavator Pro Kayak Roof Rack on 2020 Mazda CX-30
Professional installation of Thule 898 Hullavatoe Pro on a Mazda 2020 CX30 | Hi Lee; I attached a link to our installer locator below. Once you enter your location you will be able to find local shops to get the Thule Hullavator Pro # TH898...
Trailer Hitch Recommendation for 2023 Mazda CX-30
Im looking for a hitch for a 2023 Mazda CX-30. I will be towing a jet ski no hills to speak of and nothing else. The trailer and jet ski are no more than 800 lbs and the I can easily lift the end... Id guess that the tongue weight is less...
Will Maxtrax Mounting Brackets Fit Rivian Cargo Crossbars
Will this fit Rivian Cargo Crossbars? | Hey Philip, thanks for reaching out! The Maxtrax Mounting Brackets # MA92PR were designed around the Rhino-Rack Vortex crossbars so as long as the T-Slots for your Rivian crossbars are similar to the...
How Does Adarac Aluminum Series Ladder Rack A33VA Fit with Tonneau Cover
Hi, I own a 2022 Rivian R1T, with a power tonneau cover. After reading your materials, Im still not 100 sure of how the Ladder Rack mounts to the truck bed? Im seeing no drilling is needed great!, but wasnt totally sure if the tonneau cover...
What Type Of Hardware/Bolts Are Used For The Curt C49CR Hitch For 2023 Mazda CX-30
Hi, a friend sold me a CURT trailer hitch class I for my 2023 Mazda CX30 but with no bolts/nuts, I found you guys doing research, can you please inform me what type/kind/size of bolts are needed? Many thanks! | Hello Fernando, you came to the...
Does Curt Hitch for 2020 Mazda CX-30 Also Fit 2024 Model
I have your Curt Class-1 hitch on my 2020 Mazde CX30. I am considering getting a new 2024 car. Will my hitch fit the new 2024? I would expect that some of the mounting bolts would be difficult to get out of the frame on to 2020 so would you...
Can The Rhino-Rack Roof Rack For Tracks Be Installed On Rivian Factory Mounting Points
Hi. I have a 2022 Rivian R1T Will the RhinoRack crossbars work for my factory bed top edge attachment points? Thanks, Nick | Hey Nick, The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT uses an M6 24x24x4 Nut to mount into...
Filter Your Search
Contact and Help