Replacement Fender for Shorelander SLR80TAL
Looking for replacement fender options for shorelander slr80tal dual axle boat trailer. Vin 1mdavp0234a266485. Only need one fender preferably aluminum smooth finish | Hey Alan, we do have one smooth aluminum tandem axle fender setup with the...
Location of Fill Ports on Valterra RV Water Tank
How can you fill this? I don’t see a fill port. Or does it require a pressurized water supply? | Hi Elliott; the Valterra RV Water Tank # R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture,...
Replacement Rubber Channel Strips for a Volvo C30 w/ Thule Crossbars
I’m trying to find replacement rubber strips for my roof bars on my Volvo C30 asking around on the forums I was able find out that these roof bars are essentially Thule wing bar evos. I’ve measured the channel and the top opening is about half...
Tonneau Compatible Ladder Rack For 2025 Rivian R1T With OEM Tonneau Cover
2025 R1T I am 5 4. looking for a ladder rack options the work with the Rivian Tonneau cover that rolls with the bed rail button. and the tail gate button and also the side cargo buttons. please help with information and options. | Hey Dave,...
Will Adarac Aluminum Series Custom Truck Bed Ladder Rack Match 2022 Rivian R1T Roof Rack Height
I have a 2022 Rivian R1T. Does your rack height by chance match the factory rack height on the cab in case I wanted to use both? Thanks! | Hi Allen; I'm not sure what the factory roof rack height is on your 2022 Rivian R1T, but I can tell you...
Ladder Rack that Fits 2025 Rivian R1t
Does it fit on a 2025 Rivian R1T, and how is it installed with a tonneau cover? Any drilling involved? | Hey Tammy, we don't have any tonneau covers for your 2025 Rivian R1T that have the needed channels to use the Truxedo Elevate Ladder Rack...
Will etrailer Anti-Rattle Device part # e38FV Fit Rivian Hitch
Do we know if this product will work on the Rivian hitch given its hidden, and fairly deep sunken? | Hey JZ, I would have to see the hitch but basically it would need to have a lip/collar around the outside of the hitch for the etrailer anti-rattle...
Recommended Replacement for a N006 Key
I need to find a replacement key. Key is 600N. I could not find it. Would you please inform how can I get it? | Hey Yasuhiro, it sounds like you're looking for the Replacement Key for Thule Racks and Carriers # THKEYN006 which has the same...
Is There a Way to Adapt Yakima Raptor Bike Rack to Crossbars with Channels
Hello, I have a pair of the Yakima Raptor bike carriers and Id like to mount these on the factory cross bars on my Rivian R1T. The bar size and shape dont seem to be compatible with the universal mighty mount. So Im thinking I can use the tslot...
Will Maxtrax Mounting Brackets Fit Rivian Cargo Crossbars
Will this fit Rivian Cargo Crossbars? | Hey Philip, thanks for reaching out! The Maxtrax Mounting Brackets # MA92PR were designed around the Rhino-Rack Vortex crossbars so as long as the T-Slots for your Rivian crossbars are similar to the...
How Does Adarac Aluminum Series Ladder Rack A33VA Fit with Tonneau Cover
Hi, I own a 2022 Rivian R1T, with a power tonneau cover. After reading your materials, Im still not 100 sure of how the Ladder Rack mounts to the truck bed? Im seeing no drilling is needed great!, but wasnt totally sure if the tonneau cover...
Can The Rhino-Rack Roof Rack For Tracks Be Installed On Rivian Factory Mounting Points
Hi. I have a 2022 Rivian R1T Will the RhinoRack crossbars work for my factory bed top edge attachment points? Thanks, Nick | Hey Nick, The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT uses an M6 24x24x4 Nut to mount into...
Does Curt Trailer Hitch Receiver C11829 Fit A 2010 Volvo C30 R-Design?
I have a R design so will this hitch work on my volvo | The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11829 you were looking at is designed to fit all models of the 2008-2010 Volvo C30 and will fit your 2010 Volvo C30 R-Design...
Recommended Weight Distribution Hitch for a 7,000 lbs Short V Nose Trailer
This is a follow-up question to Adam R and your response to him. My trailer looks exactly the same as his picture...only about 15 inches of exposed frame between the center of the ball and the V Nose trailer wall. The side walls cover the side...
Anti-Rattle Adapter Recommendation For Curt Hitch When Using Adapter
I installed the adaptor into a Curtis hitch and it is loose enough to rattle when I go over bumps. Is there a way to tighten loose fits? | The anti-rattle adapter I recommend is the No-Rattle Trailer Hitch Wedge, part # MPG908. This will work...
Can You Use a 2" Hitch Extender When Towing to Let Tailgate Down
I have a Rivian R1T electric truck. I also have a brand new Forest River Rockwood 2318G pop up camper that weighs 2600 dry, maybe 3500 lb with water and belongings. My issue is Id like to extend the hitch by 24 so I can put the tailgate down...
How Big is the Clamp on Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent
what is the opening of the Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent? to fit over a truck cross car brace. | I reached out to Yakima and found that the opening for the Replacement Mounting Bracket for Yakima SkyRise Rooftop...
Does Curt Hitch part # C11337 Fit All Models of 2011 Volvo C30
Hi, It appears to be a small difference, but I wonder if the 2011 Volvo C30 in your video is actually the same model year as mine. Or, if it makes a difference. Ive attached an image. Thanks, | It looks like your 2011 Volvo C30 may have a...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Is The Adarac Aluminum Series Ladder Rack Compatible With A 2022 Rivian R1T With Tonneau Cover
I have a 2022 Rivian R1T with a manual Rivian tonneau cover. Just want to confirm I can still use the cover, which is a set of panels that slide into the bed rails, when this rack is installed. Also, can I get the specifications on the crossbars?...
Trailer Hitch Receiver For a 2008 Volvo C30
Hi Crew, Ive got a 2008 C30 Volvo. Will this hitch fit? I would only use it to hold a bike rack. Thanks! | Your 2008 Volvo C30 will need to have a custom receiver made as there is not a receiver that is confirmed to fit. The Curt Trailer Hitch...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Filter Your Search
Contact and Help