Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Finding Installer for Curt Hitch on 2009 Kia Rondo
A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...
What Diameter Hitch Pin Is Designed for 2 inch Curt Hitch
What is the required diameter of the hitch pin to fit this hitch receiver? | Hey Paul, the Curt hitch part # C13098 was designed to be used with the standard hitch pin diameter for 2 inch hitches 5/8 inch like the part # PC3. |
Wiring Needed to Install Tekonsha Prodigy P2 Brake Controller on 1996 Isuzu Trooper
Dear Customer Support, I purchased from you 7pin ETBC7 kit for my Isuzu Trooper 1996 and as I am starting to lay everything out, i realized this kit is for the standard trailer config and not the RV trailer, which has a different wire color...
Solution for Installing Trailer Wiring on a Vehicle with Separate Turn Signals from Brake Lights
I have a 1995 isuzu trooper. The previous own wired in a trailer brake control and a 7 way connector. None of the lights and or brake controller were wired in correctly, I rewired the brake controller and the 7 way connector so now I have trailer...
Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...
Do the Yakima Replacement Bolts Come w/ Nuts?
Do the Yakima 2 1/4 bolts come with the nuts to tighten on the ski rack, bike rack etc.? | Thanks for the picture! The Yakima Replacement Bolts - 1/4" x 2-1/4" item # Y80011 do not come with nuts. However, judging by the parts you have in your...
Does Draw Tite #65004 Front Mount Receiver Fit 2001 Isuzu Trooper LTD?
Hello, I just was given the part# 65004 for a Draw Tite Front Mount Receiver for my 2001 Isuzu Trooper LTD. The mounting instructions says that is for Isuzu Hombre. Could you verify if this receiver is a front mount receiver and will for sure...
Where Does a Trailer Wiring Harness Install on a 2001 Isuzu Tropper
Do I have to remove the wheel well or tail light to find the plug in? | Trailer wiring harness # C55339 installs in a factory wiring harness located on the driver's side of the back of your 2001 Isuzu Trooper. The factory harness should be attached...
Surco Safari Rack 5.0 Rooftop Cargo Basket Recommendation for 1994 Isuzu Trooper
Can the Surco Safari Rack 5.0 Rooftop Cargo Basket SP S4550-1101 fit a 1994 Isuzu Trooper with Factory rails front to back? See attached pic. Thanks! | There is a Surco Safari roof rack option that I can recommend for your 1994 Isuzu Trooper...
Items Needed to Tow a Trailer with a 2011 Lexus RX350 Without Tow Package
I bought a 2011 RX350 Canadian version that was not ordered with the tow package. What do I need to install to properly tow our 2500 lb boat? | To tow your boat trailer with your 2011 Lexus RX350, you will need a trailer hitch, wiring harness,...
Location of Vehicle Side Connection Point for Trailer Wiring Harness Installation 1994 Isuzu Trooper
looked, removed bumper but i can not locate the harness to attach to my trailer, which by the way a 4 flat. i have a 1994 isuzu trooper | According to Tow Ready, the connection point is located underneath your 1994 Isuzu Trooper on the driver...
Recommended Trailer Hitch Receiver For 2002 Isuzu Trooper To Install Yourself
Hi, I was wondering if i had to get this welded on. I have a 2002 izuzu trooper and i want to tow a jet ski for now. Possibly 2 at a time. Is this an easy personal install or do i have to take it to a welder/body shop to get it installed? Your...
Bearing Buddies for a Bearing with 1.625 Inner Diameter on a Motorcycle Trailer
Im restoring a 3 rail motorcycle trailer and the last step is repacking the bearings. Id like to get some bearing buddies or sealed type of applicator so I dont have to mess with repacking the bearings, but Im having problems finding something...
Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross
I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |
Troubleshooting Trailer Connector Not Functioning Properly
My trailer connector is not working properly. Harness is properly plugged in and properly wired. Sometimes it works well, but most of the time, it doesnt. Either the left or the right turn fail to light. It happens with both connectors, the...
Recommended Trailer Hitch Receiver for 2011 Kia Rondo
I am looking for a trailer hitch for my KIA Rondo 2011. Do you guys have anything for this models Thanks | For a trailer hitch that fits your 2011 Kia Rondo we have the Draw-Tite Trailer Hitch Receiver # 36525. This is a custom fit Class I...
Trailer Hitch Recommendation for a 2007 Kia Rondo
I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...
Distance Between Mounting Holes of ARB Recovery Point ARB23YR
What is the distance between the mounting holes? | Hey Robert, I checked with ARB and the distance between the mounting holes of the ARB Recovery Point for Toyota Land Cruiser # ARB23YR that you referenced is 2-1/8 inches. |
Brake Controller Recommendation for 1998 Isuzu Trooper Towing Camper Trailer
I have a 1998 Isuzu Trooper and will be towing a RV trailer with 2 axles weighing 3,200 pounds dry. Which brake controllers would you recommend? | The brake controller I recommend for you is the Tekonsha Prodigy P2 Trailer Brake Controller #...
Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails
Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...
Where Is Trailer Wiring Harness Connector On 1992 Isuzu Trooper
Maybe I have looked closely enough but I can NOT find the trailer wiring connection on my 92 Izzy trooper. Can you help? | The Curt trailer wiring harness, part # C55339 Is installed to the factory wiring harness connector located on the driver's...
Trailer Hitch Receiver to Fit a 2002 Isuzu Trooper
I have a 2002 Isuzu Trooper 4wd will 75278 hitch fit? Thanks | The correct trailer hitch receiver to fit your 2002 Isuzu Trooper is the Curt Trailer Hitch Receiver # C13098. It's a custom hitch designed specifically for your vehicle. The #...
Filter Your Search
Contact and Help