Tonneau Compatible Ladder Rack For 2025 Rivian R1T With OEM Tonneau Cover
2025 R1T I am 5 4. looking for a ladder rack options the work with the Rivian Tonneau cover that rolls with the bed rail button. and the tail gate button and also the side cargo buttons. please help with information and options. | Hey Dave,...
What Hitch Ball Size Do They Use in Europe
is hich ball the same size as europe | We currently carry four different size hitch balls which are 1-7/8", 50mm, 2", and 2-5/16". The most common hitch ball size in Europe is 50mm for which you can use part # 63912 if you need a 3/4" diameter...
Recommended Wiring Harness For 2010 Jeep Commander Without Factory Tow Package
we purchase hitch and wiring harness for our 2010 jeep commander. everything went perfect with install but the lights wont work. The vehicle was not equiped with a factory tow package. Does the computer need to be activated. Any ideas on...
Replacement 4-Way and 7-Way Connector for a 2007 Jeep Commander w/ a Factory 7-Way
I would like to remove factory 7 pin harness and install A new 4 pin harness 2007 Jeep Commander Trailor brakes not needed old harness has been butchered | Hey Anthony since you had the factory 7-way you'll need the Curt T-Connector Vehicle...
Trailer Turn Signals Not Working with # C55050 Wiring Harness Installed on a 2008 Jeep Commander
I have the 118408 converter connected to my 2008 jeep commander i everything works fine at the plug, when I plug in the only lights that work are the running lights, with running lights off, if I turn on a blinker and step on the brake the brake...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
Will Adarac Aluminum Series Custom Truck Bed Ladder Rack Match 2022 Rivian R1T Roof Rack Height
I have a 2022 Rivian R1T. Does your rack height by chance match the factory rack height on the cab in case I wanted to use both? Thanks! | Hi Allen; I'm not sure what the factory roof rack height is on your 2022 Rivian R1T, but I can tell you...
Location of Fill Ports on Valterra RV Water Tank
How can you fill this? I don’t see a fill port. Or does it require a pressurized water supply? | Hi Elliott; the Valterra RV Water Tank # R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture,...
Ladder Rack that Fits 2025 Rivian R1t
Does it fit on a 2025 Rivian R1T, and how is it installed with a tonneau cover? Any drilling involved? | Hey Tammy, we don't have any tonneau covers for your 2025 Rivian R1T that have the needed channels to use the Truxedo Elevate Ladder Rack...
Does Centering Keel Roller # CE29505 Come with Install Brackets
Mine has 8” bracket does the new one come with replacement bracket? | The self centering roller part # CE29505 does not come with a mounting bracket but for that we have the # CE10305G for a bracket and for a roller # CE10727A which includes...
Will etrailer Anti-Rattle Device part # e38FV Fit Rivian Hitch
Do we know if this product will work on the Rivian hitch given its hidden, and fairly deep sunken? | Hey JZ, I would have to see the hitch but basically it would need to have a lip/collar around the outside of the hitch for the etrailer anti-rattle...
Front Hitch for 2006 Jeep Commander to Mount SnowBear Personal Snowplow
Mounting bracket for snow bear personal plow to fit 2006 Jeep commander | Since the SnowBear Personal Snowplow part # SB324-081 is designed to attach to a front hitch what you'll need is a front hitch designed to fit your 2006 Jeep Commander...
Replacement Side Marker Lights For A 2015 OEM Can AM RT622 Motorcycle Trailer
I have a 2015 OEM Can Am RT622 motorcycle trailer and need Replacement LED Side Marker lights YELLOW in the front RED in the back they are obsolete and I can not get them anymore and was wondering if you would be able to help find a replacement...
Can the Curt Echo Brake Controller Be Used W/ Air Brakes
I have a 2006 Newmar Dutch star with air brakes .I want to pull a enclosed trailer will Part C51180 work the Brakes ? | Donald, the Curt Echo Trailer Brake Controller # C51180 is not going to work with air brakes. This brake controller works...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Does Inno Roof Deck Platform rack part # INA510 Fit 2008 Jeep Commander OEM Crossbars
I have an 08 Jeep Commander with OEM roof bars. The bars are flat aero type bars that are curved…meaning taller in the middle than on the sides. I’m interested in the Inno INA510. Will this mount to my curved bars? Thank you. | Hey Allen, yes...
Parts Needed To Add 4-Flat And 7-Way To 2008 Jeep Commander
Tim Anderson 320-226-5570 Looking to add wiring harness for a 2008 jeep commander without factory tow package I know I need 118408 but would also like to add 7 way round plug-in and mount but I don’t need the trailer brake option | Hey Tim,...
Will Redarc Tow Pro Brake Controller Fit 2010 Jeep Commander with 7-Way
I have a 2010 Jeep Commander 5.7L and a 21foot expandable trailer. Will the Redarc Tow Pro elite work and if so, what additional pieces are needed for the install? I already have a Mopar Electric Trailer Brake Controller Harness 82210512ACinch...
Will Maxtrax Mounting Brackets Fit Rivian Cargo Crossbars
Will this fit Rivian Cargo Crossbars? | Hey Philip, thanks for reaching out! The Maxtrax Mounting Brackets # MA92PR were designed around the Rhino-Rack Vortex crossbars so as long as the T-Slots for your Rivian crossbars are similar to the...
Is There a Way to Adapt Yakima Raptor Bike Rack to Crossbars with Channels
Hello, I have a pair of the Yakima Raptor bike carriers and Id like to mount these on the factory cross bars on my Rivian R1T. The bar size and shape dont seem to be compatible with the universal mighty mount. So Im thinking I can use the tslot...
How Does Adarac Aluminum Series Ladder Rack A33VA Fit with Tonneau Cover
Hi, I own a 2022 Rivian R1T, with a power tonneau cover. After reading your materials, Im still not 100 sure of how the Ladder Rack mounts to the truck bed? Im seeing no drilling is needed great!, but wasnt totally sure if the tonneau cover...
Where Is The Factory Wiring Harness Plug On A 2008 Jeep Commander?
I have a 2008 jeep commander and can not find the factory plug to fit the 20135 combo adapter to, any ideas wear to look? | Hello Mitch, thanks for reaching out. The # 20135 Multi-Plug T-One Connector Assembly you mentioned is made for a 2008...
Can The Rhino-Rack Roof Rack For Tracks Be Installed On Rivian Factory Mounting Points
Hi. I have a 2022 Rivian R1T Will the RhinoRack crossbars work for my factory bed top edge attachment points? Thanks, Nick | Hey Nick, The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT uses an M6 24x24x4 Nut to mount into...
Brakes Jerk and Grab when Braking Using Curt Echo Brake Controller # C51180
I have a 2007 Jeep Commander. I pull a Sunlite 16bh trailer. Less than 3000 lbs. The controller worked smoothly the first few times I took it out, but now the brakes jerk and grab when applied. The response it set at 10, and the sensitivity...
Filter Your Search
Contact and Help