Gooseneck Hitch Recommendation for a 1997 Ford F-350 Dually
Do they make a ball hitch for duallys. if so how much trouble is to install. and cost. 97 ford 1 ton dually. Thanks | We have a few options for your 1997 Ford F-350 dually as long as it is not a Cab and Chassis model (like a service vehicle...
Measurement of Curt 3-Piece Trailer Hitch C15511 from End of Mounting Flange to Receiver Tube
What is the measurement from the end of the frame rail to the center of the hitch pin hole once this hitch is installed? I have an aftermarket bumper and Im trying to make sure this hitch will work with the drawbar Ive chosen to buy. Thanks!...
Recommended Louvered Tailgate For A 1997 Ford F-250 Heavy Duty
Looking for a louvered tail gate for my 1997 Ford F250. | For your 1997 Ford F-250 Heavy Duty, we have the Stromberg Carlson 100 Series 5th Wheel Tailgate # VG-100. This has an open design that improves your field of vision when driving and...
Needing a Replacement Mounting Bracket for a Pollak 7-Way Connector
Trying to find the correct replacement mounting bracket for my Pollak 7-pin trailer connector. Everything I see has the wrong bolt hole spacing. Mine is 2 1/2inch x 1 3/4inch center to center which is about 1/4inch larger than the brackets...
Recommended Air Lift Suspension Enhancement For 1997 Ford F-250
Hello, I have a 1997 Ford F250 HD Square Body 2 wheel drive Long Bed with a Drawtite Remove A Ball Goose Neck hitch. Is there a system/kit that would be compatible with my setup?Air Bags for Towing Thanks! | For your 1997 Ford F-250, I recommend...
Will CIPA Mirrors for 1997 Ford F-250 Help When Towing 8-1/2 ft Wide Trailer
Will these mirrors work if towing a car trailer 8 1/2 ft wide? They will be going on a 1997 Ford f250. Thanks, | An 8-1/2 foot wide trailer is pretty wide but the tow mirrors part # CM11000-2 are going to help quite a bit to see behind your...
Fit of B & W Class V Trailer Hitch # BWHDRH25198 on 1997 F350 With 10 Inch Bumper
have a 1997 f350 with 10 inch bumper will this hitch fit my truck? | According to B & W, their # BWHDRH25198 Class V hitch is compatible with the 10 inch bumper on your 1997 Ford F350. You might also need the following to complete your towing...
Could Demco Recon for Recessed Ball Hitches Be Adapted to Standard Version
I have 2 trucks. One is a f450 with a flatbed and a recessed gooseneck ball in a pocket built into the flatbed, for which appears this hitch will work fine. The second is a f250 with a gooseneck hitch where the ball sits above the floor of...
Parts Needed To Install the Reese 5th Wheel Trailer Hitch Part # RP30075 On a 1997 Ford F-250
I need a rail install kit for a reese 16000 to mount in a 1997 f250 hd it is a kwik slide unit | In order to install the Pro Series 5th Wheel Trailer Hitch part # RP30075 in the bed of your 1997 Ford F-250 you will need to use the Reese Universal...
Dim Tail Lights on 2007 Toyota Yaris Hatchback When Flat-Towed Using Roadmaster Diode Kit # RM-154
I installed this system on my 2007 Toyota Yaris Hatchback. I only used the tail/stop light on the Yaris and didnt connect to the separate turn signal bulbs. I just used the stop light for turn signal. Everything works perfectly but the lights...
Fifth Wheel Adapter for a Draw Tite Hide-A-Goose Gooseneck Hitch
Do they make one to fit draw tight turn over ball? | I have a solution that could work well for you, but there isn't an adapter exactly like the # 16310 that would fit a Draw Tite turn over Hide-a-Goose. Instead I would recommend the Hi-Rise...
Is the etrailer Electric Trailer Brake Kit Quality on Par With Other Brands
Why are these so much less than the other brands that you sell, are they lacking in quality? | The Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA and other etrailer branded brakes...
Does Demco Recon Need to Have Base Entirely on Truck
1997 F350 8’ bed with an Atwood 75064 over bed folding gooseneck hitch welded to a 3/8” thick 24”x48” steel plate which is bolted to the bed bolt heads are 40” across from each other. Does the DM8550045 work with this setup? I understand the...
Are There Air Bags for a 1997 Ford F-350 with In-Bed Hitch
Looking for a set of airbags for my 97 f350 that won’t interfere with my BandW turn over ball | I do have suspension enhancement options for a 1997 Ford F-350 but air bags won't be one of them as they all mount in the same spot as the in-bed...
Firestone Ride-Rite Air Bag Suspension Enhancement for a 1997 Ford F-250
Just looked at your web site for the correct Firestone Ride Rite kit for my vehicle, 1997 Ford F250, 7.3L Diesel. Looking for a no drill kit, which is indicated as F2071, but your site expert indicated this was only for the Dodge Truck. | Firestone...
Is the P3 Brake Controller Better than the Voyager for a 1997 Ford F-250HD
I currently have the voyager in 97 F250HD. I am thinking of upgrading to the prodigy P3. It appears to have a easier set up, and you can read numbers instead of the brightness of a orange to red light. Is it worth it or am I achieving the same...
5th Wheel Installation Kit for 1997 Ford F-350 Long Bed Pickup
I am looking for 5th wheel Base rail installation kit. I have a 97 f-350 long bed. The 5th wheel is a Reese classic 15k part number 30032. Thanks for the help. | For your 1997 Ford F-350 long bed pickup (without the overload springs) the easiest...
Parts Needed to Flat Tow a 1997 Ford F-250HD 4X4 7.3 Liter Behind an RV
Can I use this tow bar for my Truck? What accessories and base plates will I need? Also can you recommend a brake controller while towing my truck with an Allegro Bus 40QRP? Thank You | There are many configurations of the 1997 Ford F-250HD...
Timbren Rear Suspension Enhancement System Instructions for 1997 Ford F-250- F-350 Heavy Duty
Timbren frtt350e bracket doesn’t fit truck bracket. Can send pictures. Thanks | I am sorry to hear you are having trouble installing the Timbren Rear Suspension Enhancement System item # TFRTT350E on your 1997 F-250 or F-350 Ford Heavy Duty....
Troubleshooting Reese Towpower 74643 Brakeman Digital Brake Controller
I have a 1997 F250 HD and have wired the Reese Towpower 74643 Brakeman Digital Brake Control according to directions with the exception of using 12awg instead of 10awg. The issue I am having is that with no trailer connected I dont get the dot...
Can Rhino-Rack RT Roof Rack Tracks Be Cut And Bent To Fit Curved Roof?
Are the end-caps removable to allow the tracks to be cut to size? I see only options that are slightly too long, or too short for my application. Are the tracks flexible enough to align with a slightly convex roof profile? | Yes, roof rack...
Fifth Wheel Tailgate for a 1997 Ford F-250 Heavy Duty
i have a ford f250 heavyduty, not superduty, will tailgate still fit my truck? Ford made a heavyduty and superduty both in 1997. | For the 1997 Ford F-250 Heavy Duty, you would need Stromberg Carlson 100 Series 5th Wheel Tailgate with Open...
Will Buyers Products Hitch Plate w/Receiver Tube # 3371809060A Fit a 1997 Ford F-350 Cab and Chassis
Will this fit on a 1997 Ford f350 cab and chassis and how wide are the flat pieces that run up along the frame | Buyers Products Hitch Plate with Receiver Tube # 3371809060A is indeed designed to fit the Ford cab and chassis trucks so it will...
Trailer Hitch for a 1997 Ford F-250/F-350 Cab and Chassis Model
Already bought the wrong hitch once here for this truck I want the 2nd one to work. Its a 97 Ford superduty. Its sold as a cab and chassis | For 1997 a cab and chassis model would have an outside to outside frame width of 34 inches. If that...
Filter Your Search
Contact and Help