Result:

I am interested in a shocker hitch. I have a 2003 ford excursion, 7.3 l diesel with 4 wheel drive. I primarily pull a RV that weighs 7,000 lbs. What model do you recommend? thanks | Hey Patrick, The Shocker Hitch # SHK47VR would be a solid...

I need to replace the weather stripping for the lift gate on my 2003 Ford Excursion and the OEM Part 2C7Z-78404A06-AA has been discontinued. I have been searching junk yards and the internet for something that might work. Might you have something...

I have the 5000 Air Lift series bags on my 2WD Ford Excursion, and during the beginning of our three month RV trip the passenger side will not hold air. Troubleshooting my a local mechanic indicates bag is damaged. What recourse do I have while...

I have the Prodigy P3 installed on my 2003 Excursion 6.0L diesel using the 3035-P adapter. Intermittently I get the Open Ground No Brakes warning message. No trailer connected. I checked the batteries negative terminal to chassis in the engine...

hi- i am wondering if rhino rack locking end cap part m622 is available to purchase and what size security key is used to operate. thank you in advance for your time. chris baer | Hey Christopher, it sounds like you are looking for a replacement...

Hi. I would like to install air bags on my Excurion 2003 4wd diesel. I would like it to auto level and not have to mess with bicycle pumps etc. Is there a kit for that? Thanks | Hey Pete, we have just what you are looking for with the Firestone...

I purchased a Rhino roof rack system 2003 Ford Excursion from you 3 or so years ago. Im in need of replacement keys, the lock number is 012 and the rack end cap is code M622 original keyinch was a blue plastic round key. Can I get those from...

I am looking to replace my trailer hitch on 2003 Ford Excursion and wanted to see if you had a class V option? Not that I want to tow that heavy but for the thickness it looks like they have in the metal. Is there any that would match frame...

SWAY BARS: Regarding the hitch mounted ball for the sway bar, is the frame that the ball is mounted to an welded integral part of the trailer hitch or is this frame mounted under the main 2 ball? | Hey Larry! The Reese Friction Sway Control...

Hi, Can these be used on a steel deck car trailer? Almost all reviews and pictures are of wood deck trailers. Thanks Pete | Hey Pete, yes the Brophy D-Ring Tie Down Anchor w Backing Plate # RR5K can be installed on a steel deck trailer. I found...

I have a 2003 ford excursion with the 7.3 diesel 4x4 truck what is the biggest transmission cooler I can put on my truck for towing | Hey Tim, for a larger transmission cooler that is really efficient that is a fit for your 2003 Ford Excursion...

Im looking to buy air bags for a 2003 Ford Excursion v10 4x4. Which one will fit and do they have bump stops in them. Thank you | The air bag kit I recommend going with for your 2003 Ford Excursion is the Firestone Ride-Rite Air Helper Springs...

I am having issues finding the right product to flat tow my vehicle behind my motor home. I have a 2003 Ford Excursion with a 6inch lift which is equivalent to a 4in lift on a F-250. I already have a driveline disconnect for my vehicle. Any...

Hello, I would like to know how do I attach this rack to my existing factory roof rails? Thanks. | I got you covered! From the pictures you provided, you have factory tracks mounted on your 2003 Ford Excursion. In order to install the Rhino-Rack...

TFF350SD2. Can I assume the ...SD2 is for 2w drive and the SD4 is for 4 wheel drive vehicles. | Yes, you are on the money with the fits. The Timbren Front Suspension Enhancement System # TFF350SD2 is a fit for the 2-wheel drive model of the...

Ford excursion 2003 10 cylinder. Does the product include all hardware? If yes, what is included. Is it stronger than the original! Will it rust? | The Curt hitch part # C14011 that you referenced is a confirmed fit for your 2003 Ford Excursion...

I need to have these installed. What is the expected hours to install on the rear? | If you are installing just the Firestone Ride-Rite airbags # F2255 without an on-board air compressor like the # F2158, then I would estimate that it should...

Good Evening, I am looking for a 50mm ball so as to attach a Euro style bicycle carrier to a 2 reciever. I see you have a 50mm ball, however the pictures are not clear if it has the undercut under the ball for the hitch to secure to? Please...

What is the pin diameter of the SA3021 for 2 inch applications? | The Replacement Hitch Tite Anti-Rattle Hitch Pin for Saris Bike Racks part # SA3021 uses a 1/2"-13 bolt. I am not sure what you mean by pin diameter as the above is a bolt, not...

I have a 2003 Ford Excursion Limited it has a factory blocker beam installed on it which is rusting away would your hitch be a direct fit 4 the replacement of the blocker beam it looks like youre hitch has a different bolt pattern the blocker...

Can this coupler be mounted on the bottom side of the frame to create an underslung mount to work with 9 inch trailer frame and WD platform? | I spoke to Demco, and unfortunately the Coupler # DM15349-52 cannot be mounted to the bottom of a...

Hello. I have a question about trailer tires. I have a used camper, and the data plate on the camper says to use ST225/75 R15 load range D tires. I recently noticed that the previous owner put on load range C tires, which makes me a little nervous....

Im purchasing a replacement trailer jack for a pop-up camper from yall, the Atwood Round Trailer Jack, no hardware#AT80036...can you recommend an attachable wheel that will fit the Atwood Jack? There are several available, I just couldnt figure...

Which spacers are required for a 2004 ford excursion with a 4 inch lift. Is there a difference between the f2371 and f2370 spacers? The ride rite kit I have is the 2251? Thanks | The 2 Firestone spacer kits that you mentioned, # F2371...