Is There an Articulating Coupler That Will Work for Jeeps
I am looking for the Max Coupler to the Jeep side and the camper side. | We do have an articulating coupler that will work with your Jeep and trailer, although we don't carry the Max Coupler brand. What we carry is the Lock N Roll Articulating...
Inner Channel Width of Lock N Roll Articulating Hitch # 336VS503
What is the inside dimensions of the channel mount? I saw the outside dimensions are 3 inches. | The inner channel width of the Lock N Roll Articulating Hitch # 336VS503 that you referenced is 2-7/8 inches on the side that attaches to the articulating...
Hitch Height for Curt Hitch that Fits 2022 Subaru Outback Wagon
hi. i may trade my 2019 Subaru ascent for a 2023 Subaru Outback limited XT. I have an off-road tear with 20inch of clearance. that works good with my lock and roll hitch, since the ascent has receiver height of 20. do all of the available...
Lock N Roll 5-position for 1-1/4 Inch Receiver
Hi, Is there a product similar to 336VS503515 that is made for a 1-1/4inch receiver? My vehicle hitch receiver is 1-1/4inch but I need about 7inch rise. I realize I could use a 1-1/4inch to 2inch adaptor, but that would reduce the tongue...
Will the Lock N Roll Articulating Coupler Fit a Karvana Trailer
Hello was just trying to see if you could possibly verify if part#336TS504, weld-on A-frame would fit on a 5x8 karavan utility trailer. I do have pictures with measurements off the trailer if need be that I could send, thank you. | The Lock...
A 95 Hub Face With 73 Spring Center For Extra Clearance
can i have 95hub face with 73inch spring center? I need to replace my axles and would like a litle extra clearance between the tire to match my jeep | Your answer really depends on how big the tires are you want to use. We generally recommend...
Installing Lock N Roll Articulating Channel Tongue Trailer Coupler on Tear Trailer
I have a tear trailer already set up with the receiver for a 2” ball hitch. Given this setup, for the Lock n Roll, how would one attach the coupler to the trailer? Would you need to remove the receiver and weld on the lock n roll coupler? |...
Can Lock N Roll Articulating Coupler and Hitch Be Used on a Trailer Traveling on Highways
I like the looks of this system but I only trailer over highways, no off-road usage. The security of a different type of hitch is appealing but I am a bit concerned about the viability at 70+ mph on extended trips. | There aren't any speed ratings...
Lock N Roll Articulating Coupler Bolt Torque Specs
What are the torque settings on this coupler when moving it vertically up and down? Thanks | The Lock N Roll Articulating Coupler # 336TS502 will come with two 5/8" grade 5 coarse thread mounting bolts and lock nuts. These bolts have a recommended...
Can Lock N Roll A-Frame Coupler be Installed on High Altitude Trailer
Can I replace the ball hitch on a High Altitude XT50 trailer with this unit? | You can absolutely replace the standard ball coupler on your High Altitude trailer with the Lock N Roll coupler you asked about, which is the following part: - Lock...
Does Lock N Roll Articulating Channel Tongue Trailer Coupler # 336TS508 Come with Install Bolts
Does the Straight tonged lock and roll coupler come with bolts to bolt on the trailer tongue? | The Lock N Roll Articulating Channel Tongue Trailer Coupler # 336TS508 does not come with install bolts. The bolt holes are 1/2 inch in diameter...
Will Lock N Roll Articulating Coupler # 336TS504 Fit 2018 NuCamp Tag Boondock Edition
I have a 2018 NuCamp Tag Boondock Edition tear trailer and want to replace the standard ball socket coupler with this one. Will it fit? Thank you. : | I looked up pictures of the front of your 2018 NuCamp Tag Boondock Edition and it uses a...
Axle and Other Towing Part Recommendations for Small Overlanding Trailer
I was just wondering if you might be able to point me in the right direction for what I would need for my overland/gear transport trailer that Im building as far as axel size and rims. The trailer is going to be a 4x8 trailer that must accommodate...
Is Lock N Roll Channel-Mount Coupler Compatible With Demco 50-Degree A-Frame Channel Coupler
Can this A frame adjustable trailer coupler be used with 336TS502 ? I’m trying to make up the height difference without using a drop hitch but instead using the top hole setting on the A frame coupler so the connection point is higher rather...
Is There a Grease Fitting for the Lock N Roll Articulating Hitches
where on earth is the location to grease this? I cant find on either the truck or trailer side? | There isn't a grease fitting on the Lock n Roll setups like the part # 336VS501 that you referenced. Greasing it would require manual application...
Could Bulldog and Curt Channel Coupler Fit in Lock N Roll Channel
Would this channel bracket be compatible with other bolt on couplers such as the Bulldog Collar-Lok Coupler Item # BD028585, or Curt Channel-Mount Coupler Item # C25328? | The channel of the # 336TS505 is wide enough to accommodate the # BD028585...
Choosing The Correct Lock N Roll Adjustable Channel Hitch To Match Your Trailer
I will soon be driving 1000 miles to pick up a trailer so I want to get this right. The trailer builder will install a lock n roll on trailer side. I will purchase vehicle side. My ford ranger measures 21.5 inches to top of receiver. Builder...
Is the Ark Off-Road Coupler Better than The Lock N Roll Coupler?
I am trying to decide between the Ark coupler and the Lock n Roll. I have a 3500# wet camper being pulled by a Tacoma. I like the use of a ball for versatility as in the Ark, but am concerned with the 5000# strength rating off road. What...
Replacement Trailer Tongue Coupler For Detail K2 Utility Trailer
I hate the type of coupler that comes stock with the DK2 Mighty Multi Utility trailer. How wide is the coulpler that now comes standard in this kit? | The coupler on the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7 is for a 2"...
Lock N Roll Hitch for 2017 Acura MDX Plus 7-Way Trailer Wiring Harness
Hello, I bought a Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2inch in May of 2017 for my Acura MDX, 2017. We now need a 7 pin Connector Harness and a Lock Nfoot Roll articulative trailer hitch vehicle side to pull...
Adjustable Height Setup for Lock N Roll Articulating Hitch Setup
I have a 2014 Jeep Wrangler and use a Lock N Roll Trailer Hitch straight non-adjustable height to pull my Taxa Wholly Bear trailer. I need to get about a 2-4inch rise to make my trailer level to the ground. Instead of purchasing the adjustable...
Center Of Hitch Pin Hole To Center Of Receiver Pin Hole On Lock N Roll Articulating Hitch 336VS517
what is the distance center to center from the receiver pin to the Lock n roll trailer hitch | I had our warehouse measure the Lock N Roll Articulating Hitch for 2" Receivers - 4-1/2" Drop/Rise # 336VS517 you were looking at, and from the center...
Recommended Lock N Roll for Military M101a Trailer
Need guidance on swapping out a pintle hitch set-up on a military utility trailer M101a to a LockNRoll system. The trailer will be for overland camping use and pulled by a Jeep Wrangler or Truck. I can upload pics of the current pintle hitch...
Can Lock N Roll Coupler Be Used for Flat Towing a 1992 Jeep YJ Behind a Motorhome
How will the Lock and Roll system do in a flat tow situation with a 92 yj jeep as the towed vehicle in lieu of a trailer at highway speeds? | That's a big no when it comes to using the Lock N Roll Articulating Channel Tongue Trailer Coupler...
Filter Your Search
Contact and Help