Trailer Lights Specs:
Features:
...LED trailer tail light serves 6 functions Stop, tail, turn, reflector, and side marker License plate light illuminates your trailers license plate for easy identification ONE Series...
More Information >Trailer Lights Specs:
Features:
...bracket, 25' wiring harness with 4-pole connector, and mounting hardware Sonically sealed, waterproof tail lights and clearance lights are submersible 2 Low-profile combination tail lights (ST16RB and...
More Information >Trailer Lights Specs:
Features:
7-7/8" x 3-1/4". Low-profile light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount with included hardware. Molded 2-way plug. PC rated.
More Information >Trailer Lights Specs:
Features:
...license plate light Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient ...
More Information >Trailer Lights Specs:
Features:
...Low-profile trailer tail light serves 7 functions Stop light, tail light, turn signal light, side marker light, side reflex reflector, rear reflex reflector, and license plate light Sealed...
More Information >Trailer Lights Specs:
Features:
...often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer....
More Information >Trailer Lights Specs:
Features:
...replace - no brittle filaments Plastic housing Red acrylic lens Mounts on surface of trailer - hardware included 3-Wire pigtail White wire is for ground Brown wire is for the tail lights Yellow wire is for...
More Information >Trailer Lights Specs:
Features:
...plate light illuminates trailers license plate Sealed, waterproof construction is submersible Built-in reflector removes the need for a separate reflector Incandescent 2057 bulbs can be easily replaced...
More Information >Trailer Lights Specs:
Features:
...Red, rectangular trailer light serves 8 functions for trailers more than 80" wide Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker, Side Reflex Built-in license plate light...
More Information >Trailer Lights Specs:
Features:
...license plate illuminator Miro-Flex faceted reflector design provides increased light output with a contemporary appearance Sealed, waterproof construction is submersible Light is designed specifically for...
More Information >Trailer Lights Specs:
Features:
...often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer....
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
Hey Barry, so the GE Profile Propane RV Range with Glass Cover #GE24VR used to come with a glass lid but it looks like they updated it and got rid of that part.
view full answer...Hello Richard, thanks for reaching out. You are correct the Advent AC Units like part #ACM150 are generally not going to be compatible with the Duo-Therm AC systems. Especially since your current unit is so old. Your best option will be to replace…
view full answer...Hello Robert, thanks for reaching out. The best option for this will be to replace your rooftop AC, controller and distribution box. Do you prefer a wall thermostat, or a distribution box with manual controls on the ceiling? We have options for both,…
view full answer...Hey Dick, Extra space for mounting and breathability for the unit itself is why the manufacturer lists the cutout hole needing to be 22-7/16" wide x 15-3/16" tall. That being said if your cutout hole is smaller but can still fit the #HP99ZR…
view full answer...Hey Troy, with the Dometic Penguin II with heat pump part #DMC38ZR you can use a wall thermostat with the part #DMC23ZR and the manual air box part #DMC43ZR but there isn't a remote controller option available at this time.
view full answer...Hey Rodney, it sounds like you've done your homework! That MoRryde set up you referenced is definitely going to upgrade your Dutchman's suspension and make towing it more comfortable. You'll want to take two measurements before ordering…
view full answer...The lens on the RV Oval Porch and Utility Light #RVPL7C is held to the housing with some tabs on the lens that fit slots on the housing. To remove the lens you will need something thin and flat like a knife or small screwdriver to gently pry the lens…
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…
view full answer...Hi Adam; for a plug and play replacement that is compatible with your Dometic setup I recommend the Furrion Chill HE. This will work with your existing thermostat and air distribution box so you only have to swap out the AC unit. You can choose from…
view full answer...Hello Manuel, thanks for reaching out. We do offer a replacement for your Dometic 3313195.012 Thermostat. For that, you can use the following: - Replacement Single Zone Thermostat for Dometic RV Air Conditioners - Black #DMC79FR This is basically…
view full answer...I've attached the installation instructions for the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch - Remote - 2,000 Watts - 12V #PD64FR for you below.
view full answer...I have a solution that may work for you, but we do not currently have any 3" diameter submersible reverse lights. Have a look at the Optronics Backup Light #BU45CB which is a 4-1/4" diameter light that can be mounted to your trailer using…
view full answer...