Trailer Lights Specs:
Trailer Lights Specs:
Features:
3/4" Round. Waterproof mini trailer light with 2 red LEDs functions as both a clearance light and a side marker light when properly mounted. Clear polycarbonate lens. Recessed mount with included black PVC grommet. 2-Wire pigtail. PC rated.
More Information >Trailer Lights Specs:
Features:
3-3/16" x 1-7/16" Rectangle. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
3-1/2" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Chrome bezel provides a finished look when installed. Simple installation with adhesive backing.
More Information >Work Lights Specs:
Features:
3-1/4" Diameter round. Waterproof trailer light mounts near your coupler to make it easier to see when you're hitching up to your tow vehicle. Durable polycarbonate lens and housing. Flange mount - hardware not included. 3-Wire pigtail.
More Information >Trailer Lights Specs:
Features:
4-1/2" x 3-3/4" Oval. Low-profile trailer reflector increases visibility of vehicle in low lighting. Durable aluminum housing. Surface mount to trailer - hardware not included.
More Information >Trailer Lights Specs:
Features:
3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with included grommet. 2-Wire pigtail. PC rated. 2 Diodes.
More Information >Trailer Lights Specs:
Features:
3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with included grommet. 2-Wire pigtail with.156 bullets. PC rated.
More Information >Trailer Lights Specs:
Features:
3/4" Diameter round. Mini LED trailer light functions as both a clearance light and a side marker light. Recessed mount with included grommet. 2-Wire pigtail. PC rated.
More Information >Trailer Lights Specs:
Features:
3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with included grommet. 2-Wire pigtail. P2 rated. 1 Diode.
More Information >Trailer Lights Specs:
Features:
4-7/16" x 1-15/16" Oval. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.
More Information >Trailer Lights Specs:
Features:
3-1/8" x 1-3/8" Rectangle red reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
This rectangular, red reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.
More Information >Trailer Lights Specs:
Features:
2-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
2-3/4" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
More Information >Trailer Lights Specs:
Features:
3/4" Round. Waterproof mini trailer light functions as both a clearance light and a side marker light when properly mounted. GloLight lens creates a smooth, bright circle of light. Recessed mount with included grommet. 2-Wire pigtail. PC rated.
More Information >Trailer Lights Specs:
Features:
1" Diameter round. Mini LED trailer light serves as a side marker light or a clearance light. Pirhana series combines modern design with vibrant lighting. Recessed mount with included grommet. 2-Wire design. P2 rated.
More Information >Trailer Lights Specs:
Features:
4-3/8" x 1-15/16" Oval. Red trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
3/4" Round. Waterproof mini trailer light serves as either a side marker light or a clearance light. Red polycarbonate lens. Recessed mount with grommet (sold separately). 2-Wire pigtail. P2 rated.
More Information >Trailer Lights Specs:
Features:
4-5/16" x 1-11/16" Rectangle red reflector. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with included grommet. 2-Wire pigtail. PC rated. 2 Diodes.
More Information >Trailer Lights Specs:
Features:
1" Round. Waterproof mini trailer light functions as both a clearance light and a side marker light when properly mounted. Locking ring deters theft. Recessed mount with included gasket. 2-Wire pigtail with 0.18 male bullets. PC rated.
More Information >Trailer Lights Specs:
Features:
2-3/16" Round reflector; acrylic lens; surface mount; self-adhesive; red lens
More Information >Trailer Lights Specs:
Features:
3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). 2-Wire pigtail. P2 rated. 1 Diode.
More Information >Trailer Lights Specs:
Features:
3/4" Round. Waterproof, LED light serves as a side marker light or a clearance light with supplemental turn signal. GloLight lens creates a solid panel of light. Recessed mount with grommet. 3-Wire pigtail with.180 male bullets. PC rated.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
This 3" round, red reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.
More Information >Trailer Lights Specs:
Features:
4" x 1-1/4" Rectangle, red reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
2-7/8" Diameter round. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
More Information >Trailer Lights Specs:
Features:
3/4" Round. Waterproof mini trailer light with 1 amber LED functions as both a celarance light and a side marker light when properly mounted. Recessed mount with grommet (sold separately). 2-Wire design with 0.180 bullets. P2 rated.
More Information >Trailer Lights Specs:
Trailer Lights Specs:
Features:
3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
3/4" Round. Waterproof mini trailer light serves as either a side marker light or a clearance light. Durable polycarbonate housing and lens. Recessed mount with included black PVC grommet. 2-Wire pigtail. P2 rated.
More Information >Trailer Lights Specs:
Features:
3/4" Round. Mini trailer light serves as either a side marker light or clearance light. Durable polycarbonate base and acrylic lens. Recessed mount with included black grommet. 2-Wire pigtail. P2 rated.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter. Red trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
I have a solution that may work for you, but we do not currently have any 3" diameter submersible reverse lights. Have a look at the Optronics Backup Light #BU45CB which is a 4-1/4" diameter light that can be mounted to your…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some…
view full answer...Hi Ken; I reached out to Lippert on this and they were unable to find the specific pressure from the #LC689052 testing. It is a large company and sometimes information gets lost across it with other brands like the Flow Max. I would say the pump is…
view full answer...You have a good eye as the black tubing sections are plastic for the Camco Gen-Turi RV Generator Exhaust System #CAM44461. It's just the curved pipe section that is made out of stainless steel.
view full answer...The side plates of the B&W gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail of your 2004 Dodge 2500 8-foot bed. See the B&W video I included at the 7 min and 30 second mark. If your Firestone…
view full answer...I have a solution for you, but the main issue with puck style lights that mount to the surface of your RV ceiling or under cabinets, is that there aren't replacement bulbs available and they aren't really designed to have the…
view full answer...There unfortunately isn't a guide that lists the parts used on your trailer so you'll need to do a bit of investigating to see what you currently have so that we can determine the correct replacement. The first thing I like to…
view full answer...I didn't receive a picture which you can email to me directly if you would like. However, since you have a Dexter D60 axle you will need the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal item #BK3-200 you were looking at.
view full answer...To replace the motor on the LCI Pump 650057 we have the Replacement Motor #LC167576.
view full answer...The only real difference between the Alpha Systems #AL74UV and the LaSalle Bristol #3441700534142711440 is that the Alpha Systems is made of TPO which is a bit less flexible than Elvaloy-based PVC that #3441700534142711440 uses; PVC is going to be…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part #0160297 will do an excellent job of sealing your new aluminum panel to the trailer…
view full answer...