Trailer Lights Specs:
Features:
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs.
More Information >Trailer Lights Specs:
Features:
150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 6" Silver/6" red pattern, perforated.
More Information >Trailer Lights Specs:
Features:
8-5/8" x 3-1/4" x 2-5/16". Waterproof trailer light illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/2" centers with included bracket. 2-Wire design. 5 Diodes.
More Information >Trailer Lights Specs:
Features:
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.
More Information >Trailer Lights Specs:
Features:
7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.
More Information >Trailer Lights Specs:
Features:
This 17' LED light strip has a weatherproof exterior that makes it perfect for indoor or outdoor use. 300 Diodes produce a bright white light. Cut-to-fit installation with peel-and-stick adhesive backing. Hardwires to any 12V power source.
More Information >Trailer Lights Specs:
Features:
...Oval trailer light serves 3 functions on trailers less than 80" wide Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible LEDs...
More Information >LED Strip Lights Specs:
Features:
11-5/16" Long x 1-5/8" wide x 1-1/8" thick. Low-profile LED strip light produces bright white light. Awning design directs light downward at a 45-degree angle. Built-in switch controls power. Surface mount. 2-Wire design.
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-1/4" Oval. Waterproof trailer light functions as a stop, tail, and turn signal light when properly mounted. Shock-proof socket protects incandescent bulb. Flush mount with grommet (sold separately). Accepts 3-prong plug.
More Information >Trailer Lights Specs:
Features:
18" L x 2" W; alternating red/white reflector tape; 8 strips; DOT certified; rated for 7 years of use
More Information >Trailer Lights Specs:
Features:
4" x 1-3/4". Compact LED trailer light with chrome-plated housing illuminates your license plate. Surface mount to trailer with stainless steel mounting ears. 2-Wire design.
More Information >Trailer Lights Specs:
Features:
7-1/2" x 3-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Plugs into industry-standard 3-prong plug.
More Information >RV Exterior Lights Specs:
Features:
6-5/16" x 3-5/16" Oval LED light functions as an RV porch light or utility light with 16 diodes producing bright light at a downward angle. Durable SMD LEDs better withstand shock and vibration. Surface mount installation. 2-Wire pigtail.
More Information >Work Lights Specs:
Features:
4-5/16" x 2" Oblong. Low profile LED light illuminates your RV or trailer's exterior with bright white light at a downward angle. Durable die-cast aluminum housing and polycarbonate lens. Surface mount. 2-Wire pigtail.
More Information >LED Strip Lights Specs:
Features:
11-5/16" Long x 1-5/8" wide x 1-1/8" deep. Low-profile, white LED strip light makes a great RV porch light. The awning mount directs light downward at a 45-degree angle. Polished chrome housing and clear lens. Includes on/off switch.
More Information >LED Strip Lights Specs:
Features:
18" Long x 2-1/8" tall x 1-1/16" thick. Low-profile LED strip light produces bright white light. Awning design directs light downward at a 45-degree angle. Polished chrome housing. Surface mount - hardware not included. 2-Wire design.
More Information >Trailer Lights Specs:
Features:
1-13/16" Long x 2-1/2" wide x 2" deep. Single-LED trailer light illuminates your license plate. Chrome-plated steel housing has a built-in flange for surface-mount installation. 2-Wire pigtail with power and ground wires.
More Information >Work Lights Specs:
Features:
6-1/2" x 2-1/8" Oval. Waterproof, LED trailer utility light produces bright white light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts standard 2-prong or 3-prong plug.
More Information >Trailer Lights Specs:
Features:
2-3/4" x 1-7/8" x 2". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount on 1-3/4" centers with included studs. 2-Wire pigtail with power and ground. Studs included.
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: stop, turn, and tail. Miro-Flex faceted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plug
More Information >Trailer Lights Specs:
Features:
...span>2-3/4" long x 1-3/8" wide x 1" deep Distance between mounting holes (center on center): 2" Diodes: 2 Power draw at 12.8V: 0.027 amps Lifetime warranty on LEDs Manufacture...
More Information >Work Lights Specs:
Features:
7-9/16" x 3-5/16" Oval. Waterproof LED utility light provides bright light to illuminate an area. Durable polycarbonate housing and lens. Surface mount with built-in flange - no panel cutout required. 2-Wire design.
More Information >Trailer Lights Specs:
Features:
2-1/8" x 1-3/8" x 1-3/4". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Recessed mount with included bracket and grommet. 2-wire design with.180 male bullets.
More Information >Trailer Lights Specs:
Features:
6-1/2" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts 2-prong plug.
More Information >RV Exterior Lights Specs:
Features:
6-5/16" x 3-5/16" Oval. LED light functions as an RV porch light or utility light with 16 diodes producing bright light at a downward angle. Durable SMD LEDs better withstand shock and vibration. Surface mount installation. 2-Wire pigtail.
More Information >Trailer Lights Specs:
Features:
2-3/4" x 1-3/8" Rectangle. Mini LED trailer light illuminates your license plate. Durable ABS housing protects light against road debris. Surface mount with foam gasket - hardware included. 2-Wire design.
More Information >Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Stud mount to trailer - hardware not included Single wire design grounds through mounting hardware Specs: Dimensions: 4" long x 1-3/4" wide x 2-5/...
More Information >Trailer Lights Specs:
Features:
4" Long x 1-9/16" tall x 2-5/8" deep. Incandescent trailer light illuminates your license plate. Black polycarbonate housing has a built-in bracket for surface-mount installation. 2-Wire pigtail with power and ground wires. Clear lens.
More Information >Trailer Lights Specs:
Features:
21' L x 2" wide; alternating red/white reflector tape; DOT certified; rated for 7 years of use
More Information >LED Strip Lights Specs:
Features:
11-5/16" Long x 1-5/8" wide x 1-1/8" thick. Low-profile LED strip light produces bright white light. Awning design directs light downward at a 45-degree angle. Polished chrome housing. Surface mount. 2-Wire design.
More Information >Trailer Lights Specs:
Features:
7-1/2" x 3-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. 3-Wire pigtail hardwires into trailer.
More Information >RV Exterior Lights Specs:
Features:
6-5/16" x 3-5/16" Oval. LED light functions as an RV porch light or utility light with 18 diodes producing bright light at a downward angle. Durable SMD LEDs better withstand shock and vibration. Surface mount installation. 2-Wire pigtail.
More Information >RV Exterior Lights Specs:
Features:
This is a rectangular, surface mount porch and utility light with switch. This clear light measures 6" long x 3-1/2" wide x 2" deep.
More Information >Work Lights Specs:
Features:
4-5/16" Diameter round. Waterproof, LED trailer utility light produces bright white light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts standard 2-prong plug.
More Information >Trailer Lights Specs:
Features:
7-1/2" x 3-1/4" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing. Recessed mount with built-in flange. Accepts standard 2-prong plug.
More Information >Trailer Lights Specs:
Features:
4" x 1-1/4" Rectangle. Red and amber trailer reflectors meet FMVSS requirements for reflex reflectors. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
7-9/16" x 3-5/16" Oval. Waterproof LED trailer light serves as a parking light with turn signal function. Durable polycarbonate lens and housing. Surface mount with built-in flange. 3-wire pigtail.
More Information >Trailer Lights Specs:
Features:
8-5/8" x 3-1/4". LED trailer light with ABS mounting bracket illuminates your license plate. Durable polycarbonate lens and housing. Surface mount to trailer with bracket. 2-Wire design.
More Information >Trailer Lights Specs:
Features:
6-7/16" x 2-1/8" Oval. Waterproof amber trailer light acts as a rear turn signal and parking light. Mounts in any position. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts PL-3 connection.
More Information >Trailer Lights Specs:
Features:
6-7/16" x 2-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 3-prong plug.
More Information >Trailer Lights Specs:
Features:
4" x 2-1/6" Oval. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 2-Wire design. P2 rated.
More Information >Trailer Lights Specs:
Features:
6-7/16" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). Accepts 2-prong plug. 10 White LEDs. Clear lens.
More Information >RV Exterior Lights Specs:
Features:
6-1/4" x 3-7/16" Oval. Incandescent light provides bright light for illuminating the area outside your RV. Built-in switch. Durable plastic housing with snap-on lens. Surface mount - hardware not included. 2-Wire design. (1) 1141 bulb.
More Information >Work Lights Specs:
Features:
Low-profile utility light illuminates an interior or exterior area with bright white light. Durable polycarbonate lens and housing. Surface mount - hardware not included. Hardwired with separate ground.
More Information >Trailer Lights Specs:
Features:
150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years of use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 7" Silver/11" red, perforated.
More Information >LED Strip Lights Specs:
Features:
Waterproof, low-profile LED strip light with 9 diodes produces bright white light at a 45-degree downward angle. Durable black plastic housing. Surface mounts with wedge base. 2-Wire design. 12V and 24V compatible.
More Information >Trailer Lights Specs:
Trailer Lights Specs:
Features:
3-3/16" x 1-7/16" Rectangle. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
...2-prong plug (A45CB or A49PB - sold separately) Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 2-3/8" thick Bulb type: incandescent Power draw at 12.8V: 0.4 amps 3-Year warrant...
More Information >Trailer Lights Specs:
Features:
3-3/8" Long x 2-3/8" wide x 2-3/16" deep. Round, incandescent trailer light illuminates your license plate. Chrome-plated steel housing. Surface mount with mounting ears. Single wire design grounds through the mounting hardware.
More Information >Trailer Lights Specs:
Features:
...Dimensions: 2-9/16" long x 1-1/4" wide x 1" thick Distance between mounting holes (center on center): 2" Bulb type: 194 Power draw at 12.8V: 0.261 amps 3-Year warranty ...
More Information >Trailer Lights Specs:
Features:
4" x 2" x 1-15/16". Waterproof LED trailer light illuminates your license plate. Stainless steel mounting base. Durable polycarbonate lens and housing. Surface mount to trailer - hardware not included. Accepts standard 2-prong plug.
More Information >Trailer Lights Specs:
Features:
1-1/2" Diameter round. Waterproof trailer light with chrome-plated brass housing illuminates your license plate. Easy, snap-in installation. 2-Wire pigtail includes lead and ground wires. White polycarbonate lens with white LEDs.
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-3/8" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. Recessed mount with grommet. Accepts 2-prong plug.
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-5/16" Oval. Waterproof, LED trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing and lens. Recessed mount with grommet. Accepts 2-prong plug.
More Information >Trailer Lights Specs:
Features:
6-1/2" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system. ONE Series provides bright light using fewer diodes than other LEDs. Recessed mount with grommet (sold separately). Accepts 2-prong plug.
More Information >RV Exterior Lights Specs:
Features:
6-1/4" x 3-7/16" Oval. Incandescent light provides bright light for illuminating the area outside your RV. Built-in switch. Durable plastic housing with snap-on lens. Surface mount - hardware not included. 2-Wire design. (1) 1141 bulb.
More Information >RV Exterior Lights Specs:
Features:
6-5/16" x 3-5/16" Oval LED light functions as an RV porch light or utility light with 16 diodes producing bright light at a downward angle. Durable SMD LEDs better withstand shock and vibration. Surface mount installation. 2-Wire pigtail.
More Information >Trailer Lights Specs:
Features:
4" x 2-1/6" Oval. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 2-Wire design. P2 rated.
More Information >Work Lights Specs:
Features:
3/4" Diameter waterproof utility light with black trim ring illuminates your trailer's interior with bright white light. Durable polycarbonate housing and lens. Recessed mounted with included grommet. 2-Wire pigtail.
More Information >Work Lights Specs:
Features:
3-1/4" Diameter round. Waterproof trailer light mounts near your coupler to make it easier to see when you're hitching up to your tow vehicle. Durable polycarbonate lens and housing. Flange mount - hardware not included. 2-Wire pigtail.
More Information >RV Exterior Lights Specs:
Features:
4" x 2-1/2". Low-profile LED area light illuminates a step well or area at the base of steps or ramps. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire design. ADA compliant.
More Information >Work Lights Specs:
Features:
7-9/16" x 3-5/16" Oval. Waterproof trailer utility light provides bright white light where needed. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. Accepts industry standard 2-prong plug.
More Information >Trailer Lights Specs:
Features:
3-3/16" x 1-7/16" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Trailer Lights Specs:
Features:
2-5/8" x 1-9/16" Rectangle. Incandescent trailer light with chrome-plated housing illuminates your license plate. Bulb can be easily replaced. Stud mount to trailer. 1-Wire design. (1) 194 Bulb.
More Information >Trailer Lights Specs:
Features:
6-7/16" x 2-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 3-prong plug.
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: brake, tail, and turn. ONE Series provides bright light using fewer diodes than other LEDs. Recessed mount with grommet (sold separately). Accepts 3-prong plug. Red lens.
More Information >Work Lights Specs:
Features:
2-1/2" x 1-1/16" Rectangle. Low-profile LED trailer light illuminates an area with bright light. Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design with 0.156 male bullets.
More Information >Work Lights Specs:
Features:
3-7/8" x 1-1/4" Rectangle. Waterproof LED trailer light illuminates an exterior area with bright light. Durable polycarbonate housing and lens. Surface mounts with bracket (sold separately). Accepts standard 1-wire or 2-wire plug.
More Information >Trailer Lights Specs:
Features:
4" x 2-1/16" Oval. Incandescent trailer light serves as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 1-Wire design. P2 rated.
More Information >Trailer Lights Specs:
Features:
4-1/8" x 2-3/4" x 1-7/8". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount using mounting ears - hardware not included. 2-Wire pigtail with power and ground.
More Information >Trailer Lights Specs:
Features:
18" L x 2" W; alternating red/white reflector tape; 4 strips; DOT certified; rated for 7 years of use
More Information >Work Lights Specs:
Features:
3" x 3" LED utility light produces a bright white light. Flood beam illuminates a wide area. Black powder coated aluminum housing is rustproof. Impact-resistant polycarbonate lens. Flange mount with included hardware. 6 Diodes.
More Information >Work Lights Specs:
Features:
2" Diameter waterproof utility light illuminates your trailer's interior with bright white light. Durable polycarbonate lens and housing. Flush mount with grommet (sold separately). Accepts industry standard 2-prong plug.
More Information >Trailer Lights Specs:
Features:
1-1/2" Diameter x 2" long. Incandescent trailer light illuminates your license plate. Durable chrome-plated brass construction. Snap-in mounting. 1-Wire design. (1) 67 bulb.
More Information >Work Lights Specs:
Features:
7-9/16" x 3-5/16" Oval. Waterproof LED utility light provides bright light to illuminate an area. Durable polycarbonate housing and lens. Surface mount with built-in flange - no panel cutout required. Accepts industry standard 3-prong plug.
More Information >Work Lights Specs:
Features:
3-1/4" Diameter round. Waterproof trailer light mounts near your coupler to make it easier to see when you're hitching up to your tow vehicle. Durable polycarbonate lens and housing. Flange mount - hardware not included. 3-Wire pigtail.
More Information >Trailer Lights Specs:
Features:
2-1/2" x 1-1/4" Rectangle. Waterproof LED trailer light illuminates your license plate. Requires mounting bracket or grommet (sold separately) for installation. 2-Wire pigtail with power and ground wires. Clear lens.
More Information >Trailer Lights Specs:
Features:
2-1/2" x 1-3/16" Rectangle. Waterproof, incandescent trailer light illuminates your license plate. Bulb can be easily replaced. Multiple mounting options. Accepts industry standard 2-prong plug. (1) 194 Bulb.
More Information >Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Flush mount with grommet (A70GB - sold separately) Mounts in any 360-degree position Accepts industry standard 3-prong plug (A45PB or A47PB - sold separately) Specs: Dimensions...
More Information >Trailer Lights Specs:
Features:
4" x 2-1/16" Oval. Incandescent trailer light serves as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 1-Wire design. P2 rated.
More Information >Trailer Lights Specs:
Features:
6-1/2" Oval. Waterproof trailer light with 12 diodes provides stop, turn signal, and tail light functions. Smooth X-shape crosses the face of the light. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.
More Information >Work Lights Specs:
Features:
6" Oval. Waterproof utility light for truck or trailer. Mounts on surface with built-in black flange - hardware not included. 30" Molded wiring harness with weathertight connection included. 10 White LEDs. Frosted lens.
More Information >Trailer Lights Specs:
Features:
2-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
3-3/8" x 1-1/4" x 2-3/8". Waterproof license plate light illuminates your license plate. Single incandescent bulb is easily replaceable. Surface mount - hardware not included. Accepts standard 2-prong plug. 1 bulb.
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: stop, turn, and tail. Miro-Flex faceted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plug
More Information >Trailer Lights Specs:
Features:
3/4" Diameter round. Waterproof trailer light illuminates your license plate when mounted with the required bracket (sold separately). 2-Wire pigtail with 0.108 female barrels. Clear lens with white LEDs.
More Information >Work Lights Specs:
Features:
2-1/2" x 1-1/16" Rectangle. Low-profile LED utility light illuminates an interior area with bright light. Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design with 0.180 female barrels.
More Information >Trailer Lights Specs:
Features:
6-7/16" x 2-5/16". Waterproof, LED trailer light serves as a turn signal and parking light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 3-prong plug.
More Information >Work Lights Specs:
Features:
2" Diameter waterproof LED utility light adds bright white light to an interior area. Miro-Flex design provides increased light output with a contemporary design. Flush mount with grommet (sold separately). Accepts standard 2-prong plug.
More Information >Trailer Lights Specs:
Features:
6-7/16" x 2-5/16" Oval. Waterproof LED trailer light serves as a stop, tail, and turn signal. Durable polycarbonate lens and housing. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.
More Information >Trailer Lights Specs:
Features:
8-5/8" Long x 3-1/4" wide x 2-5/16" thick. Incandescent trailer light illuminates your license plate. Surface mounts to trailer with mounting bracket - hardware not included. 2-Wire design. (1) 67 Bulb.
More Information >Trailer Lights Specs:
Features:
4-7/16" x 1-15/16" Oval. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.
More Information >Trailer Lights Specs:
Features:
2-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: stop, turn, and tail. Miro-Flex faceted red tinted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plug
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: brake, tail, and turn. ONE Series provides bright light using fewer diodes than other LEDs. Recessed mount with grommet (sold separately). Weathertight plug.
More Information >Trailer Lights Specs:
Features:
4-7/16" x 1-15/16" Oval. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-5/16" Oval. Waterproof trailer light serves as a turn signal and parking light. Miro-Flex faceted amber tinted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plug
More Information >RV Exterior Lights Specs:
Features:
6-1/4" x 3-7/16" Oval. Incandescent light provides bright light for illuminating the area outside your RV. Durable plastic housing with snap-on lens. Surface mount - hardware not included. 2-Wire design. (1) 1141 bulb.
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-5/16" Oval. Waterproof trailer light serves as a turn signal and parking light. Miro-Flex faceted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plug
More Information >Trailer Lights Specs:
Features:
7-1/2" x 3-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Requires adapter for weathertight plug.
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-1/4" Oval. Waterproof incandescent trailer light functions as a back-up light. Shock proof socket protects bulb. Recessed mount with included grommet. Industry standard 2-prong plug.
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-5/16" Oval. Waterproof trailer light acts as a turn signal and parking light. ONE Series provides bright light using fewer diodes than other LEDs. Recessed mount with grommet (sold separately). Accepts 3-prong plug.
More Information >Trailer Lights Specs:
Features:
2-3/16" Round reflector; acrylic lens; surface mount; self-adhesive; red lens
More Information >RV Exterior Lights Specs:
Features:
6-1/4" x 3-7/16" Oval. Incandescent light provides bright light for illuminating the area outside your RV. Durable plastic housing with snap-on lens. Surface mount - hardware not included. 2-Wire design. (1) 1141 bulb.
More Information >Trailer Lights Specs:
Features:
6-7/16" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: brake, tail, and turn. Durable polycarbonate lens and housing. Recessed mount with grommet (A70GB - sold separately). Accepts 3-prong plug.
More Information >Trailer Lights Specs:
Features:
6-7/16" x 2-5/16". Waterproof, LED trailer light serves as a turn signal and parking light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 3-prong plug.
More Information >Work Lights Specs:
Features:
2-1/8" x 1-1/8" Rectangle. Incandescent trailer light functions as a utility or license plate light. Durable stainless steel base. Snap-on lens. Stud mount to trailer - hardware included. 1-Wire design. 1 Bulb.
More Information >Trailer Lights Specs:
Features:
1-5/16" Diam x 2" L on a Base; Chrome-plated armored steel housing; replaceable bulb; surface mount on 2" centers; 1-wire; 1-bulb incandescent
More Information >Trailer Lights Specs:
Features:
4" x 2-1/16". Waterproof, incandescent trailer light serves as a clearance or side marker light when properly mounted. Built-in reflex reflector. Surface mount to trailer - hardware not included. 1-Wire design. P2 rated. (1) 194 Bulb.
More Information >Trailer Lights Specs:
Features:
...360 degree position Accepts industry standard 3-prong plug (A45PB or A47PB - sold separately) Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 2-3/8" thick Bulb type: inca...
More Information >Trailer Lights Specs:
Features:
2-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
4" x 2-1/16". Waterproof, incandescent trailer light serves as a clearance or side marker light when properly mounted. Built-in reflex reflector. Surface mount to trailer - hardware not included. 1-Wire design. P2 rated. (1) 194 Bulb.
More Information >Trailer Lights Specs:
Features:
3" Diameter amber trailer reflector enhances visibility on the road. Designed for use on side or rear of your truck, trailer, or equipment. Durable polyester construction for outdoor use. Surface mount adhesive backing. J578 and J594 compliant
More Information >Trailer Lights Specs:
Features:
3-7/8" x 1-1/4" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter. Yellow trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
This rectangular, amber reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.
More Information >Trailer Lights Specs:
Features:
...Oval LED trailer tail light serves 3 functions Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements...
More Information >Trailer Lights Specs:
Features:
4" x 2-1/16". Incandescent trailer light functions as a clearance and side marker light when properly mounted. Dual bulb design increases light output. Snap-on lens. Surface mount to trailer - hardware not included. PC rated. (2) 194 bulbs.
More Information >Trailer Lights Specs:
Features:
6-7/16" x 2-5/16" Oval. 3-Function, waterproof LED light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Flush mount with grommet (sold separately). Accepts standard 3-prong plug connection.
More Information >RV Exterior Lights Specs:
Features:
Perfect for your RV exterior or interior, this amber, oval, porch and utility light includes an easily replaceable lens and incandescent bulb. Surface-mount light installs with a power lead and ground wire, and it includes a built-in on/off switch.
More Information >Trailer Lights Specs:
Features:
6-7/16" x 2-5/16" Oval. Waterproof LED trailer light serves as a parking light with turn signal function. Durable polycarbonate lens and housing. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.
More Information >RV Exterior Lights Specs:
Features:
6-1/4" x 3-7/16" Oval. Incandescent light provides bright light for illuminating the area outside your RV. Built-in switch. Durable plastic housing with snap-on lens. Surface mount - hardware not included. 2-Wire design. (1) 1141 bulb.
More Information >Trailer Lights Specs:
Features:
Gray-coated license-plate light with adhesive surface mount and replaceable bulb
More Information >Trailer Lights Specs:
Features:
6-1/2" x 2-5/16" Oval. Waterproof, LED trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing and lens. Recessed mount with grommet. Accepts 2-prong plug.
More Information >Trailer Lights Specs:
Features:
This 3" round, red reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.
More Information >Trailer Lights Specs:
Features:
4" x 2-1/16". Incandescent trailer light functions as a clearance and side marker light when properly mounted. Dual bulb design increases light output. Snap-on lens. Surface mount to trailer - hardware not included. PC rated. (2) 194 bulbs.
More Information >Trailer Lights Specs:
Features:
...and housing Amber lens over clear LEDs Compatible with 12V DC systems Recessed mount with grommet (A70GB - sold separately) Mounts in any 360 degree position Accepts industry standard 3-prong plug (A45PB...
More Information >Trailer Lights Specs:
Features:
This rectangular, red reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Work Lights Specs:
Features:
7-1/2" x 3-5/16". Waterproof, 2-function trailer tail light acts as tail and reverse light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.
More Information >Trailer Lights Specs:
Features:
6-7/16" x 2-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Requires adapter for weathertight plug.
More Information >Trailer Lights Specs:
Features:
3-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.
More Information >Trailer Lights Specs:
Features:
15" x 1-3/8". Waterproof, LED utility light bar provides bright white light for your application. Ultra-thin design fits in tight spaces. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire design.
More Information >RV Exterior Lights Specs:
Features:
8-3/4" x 3" Low-profile LED light illuminates an exterior area with bright white light. Light emits at 45-degree downward angle. Durable polycarbonate housing and lens. Surface mount with built-in flange. 2-Wire pigtail. 12 Diodes.
More Information >Trailer Lights Specs:
Features:
8-5/8" x 2-5/8" x 2-1/2". Trailer light illuminates your license plate. Durable ABS housing and polycarbonate lens. Surface mount with included bracket. 2-Wire pigtail.
More Information >Trailer Lights Specs:
Features:
2-1/2" x 1-1/4" x 13/16". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount - requires bracket (sold separately). Accepts standard 2-prong plug.
More Information >Trailer Lights Specs:
Features:
4" x 1-1/4" Rectangle, red reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.
More Information >Trailer Lights Specs:
Features:
7-1/2" x 3-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
view full answer...The temperature light on your Everchill RV Refrigerator w/ Freezer #324-000119 is likely flashing because of a lack of full power to the fridge. The fridge requires 11 amps. It is likely trying to use more power than what is available which is why…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...The first thing to do is disconnect the trailer from the Liberty. Then using a circuit tester, like part #PTW2993, test each pin of the 4-Way. Clip the alligator clip of the circuit tester to the exposed post, the ground wire. Check each pin with…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The Dexter 10K electric brakes #23-439 (right side) and #23-438 (left side) will have to be manually adjusted using the adjustment wheel below the magnet. To adjust the brakes you will use a small screwdriver or similar tool to turn the adjustment…
view full answer...I checked directly with BOLT for you, and they confirmed for me that your 2021 Chevy Silverado is absolutely compatible with their trailer hitch locks. Take a look at the accompanying photo, and if you have the same center cut key, the correct lock…
view full answer...The Bolt hitch lock part #BL7023582 that you referenced does fit your 2014 GMC Sierra 1500. I attached a chart that has all of the vehicle this works with. I also attached a link to a review video for this lock for you to check out as well.
view full answer...On equalizer 013-105-04 in kit #K71-360-00 the eye center to eye center measurement is approximately 7-1/2 inches.
view full answer...Due to the fact that carbon fiber bikes have a more sensitive frame, Thule does recommend using the Thule UpRide #TH599000. Bike rack technology has not changed to make the racks less compatible, but carbon fiber bikes have become increasingly…
view full answer...