2017 Starcraft Satellite Travel Trailer RV Antenna and Radio

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

Thanks for the info you listed. Based on that the correct replacement motor is the part #LC295380.

The Aluminum Bearcat Trailer Wheel #LH97VR and all the other 17-1/2" wheels from Lionshead are designed to fit 9/16" wheel studs. We currently do not carry any…

The Voyager RV Side Camera #VCMS12RGPR is the correct replacement for your vcms36rgp that you have. This will replace the passenger side camera with no wiring adapters required. We also have the driver side camera #VCMS12LGPR if you want to replace…

It appears that all you going to need is the Replacement Lippert 4-Point Leveling System Control Brain Wiring Harness #LC178278. This wiring harness will allow you to plug your new Replacement Lippert Leveling Control Brain for 4-Point Leveling…

The Ultra Breeze Trailer Roof Vent Cover which fits over your Dometic vent FV1400 is available in Black #DMC38FR or White #FVU1500WH. These covers are custom molded so the vent lid fits into the cover when opened.

Yes, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00 you're looking at is the correct fan motor kit for your Fan-Tastic Vent Roof Vent 6500. This kit includes a bow tie…

I recommend using the WeatherTech Front Auto Floor Mats #WT26DV on your 2023 Entegra Odyssey with the Ford E-450 chassis. These mats are custom fit for the E-450 cutaway chassis and have channels to help hold dirt and water.

Thank you for all of the info you gave. Based on that you'd want the trailer hub and drum part #AKHD-545-35-K that you referenced and then for brake assemblies to match you'd…

The camera can be replaced with the Voyager RV Backup Camera w/ Night Vision in Black #VGR84VR. To adapt the new camera to your VOM74WP System you will need the Voyager DIN to ASA Monitor Cable Adapter #VGR54FR. This will match the 4 pin connector…

Yes, the MORryde Suspension Upgrade Kit #MR46ZR can certainly be used with the Lippert Road Armor Equalizers. You will just want to be sure that the stock shackle links on your 2021 Cougar 29RKS are 2-1/4" long…

The Lippert Landing Gear #LC712690 uses the Motor #LC142178. We also have the motor with the wiring kit #LC217884 if you need to replace the wiring as well.