2023 Kia Sportage Roof Rack

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof…

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hi Dennis; you aren't going to find information on the static load listed from the roof rack manufacturers. Our general guidelines for tents like the #Y79XR are that the roof rack must have a minimum load capacity of 165 lbs which this rack does…

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

Hi Andrew; the Rhino-Rack Backbone Roof Rack Mounting System #RRRJKB1 and the RCL Legs #RRRCL6 are compatible. The spacers #RRQMHD05-3 act as an adapter since the HD bars won't fit as is. If you're fabricating your own crossbars it will be up…

The Rhino-Rack Vortex StealthBar Roof Rack #JA7970 actually has rubber coated stainless steel straps which secure it to the raised rails on your 2023 Subaru Outback Wilderness. So you won't have issues with the straps failing. If you are only…

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…