2010 Jeep Grand Cherokee Roof Rack

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

These universal roof rack crossbars allow you to mount a variety of roof rack accessories to the top of your vehicle. Lightweight, rustproof aluminum bars can support most kayaks, canoes, and rooftop cargo carriers. Locking knobs deter theft.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket truck bed rack or roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

SquareBar crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

SquareBar crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

Low-profile, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong and ultra-quiet roof rack. The aluminum bars perfectly complement your roofline and have built-in T-tracks for mounting accessories.

Installation Notes:

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

Tech Tip:

INXB115 is designated to be the frontmost bar while INXB108 is the rear

Features:

These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.

Features:

These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.

Features:

These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Features:

This complete roof rack system mounts to your vehicle with raised, factory side rails. Full-length square crossbars work with most clamp-on carriers and accessories. Vinyl-coated steel bars are corrosion resistant. Includes locks to deter theft.

Features:

These low-profile, aerodynamic crossbars clamp to your vehicle's raised factory side rails to create the quietest style of roof rack on the market. Lockable aluminum bars provide a from-the-factory look and have built-in slots for accessories.

Installation Notes:

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Low-profile, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong and ultra-quiet roof rack. Black aluminum bars perfectly complement your roofline and have built-in T-tracks for mounting accessories.

Installation Notes:

If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.

Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate

Features:

These low-profile, aerodynamic crossbars clamp to your vehicle's raised factory side rails to create the quietest style of roof rack on the market. Lockable aluminum bars provide a from-the-factory look and have built-in slots for accessories.

Installation Notes:

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This complete roof rack system mounts to your vehicle with raised, factory side rails. Full-length square crossbars work with most clamp-on carriers and accessories. Vinyl-coated steel bars are corrosion resistant. Includes locks to deter theft.

Features:

Easy-to-use roof rack clamps to your vehicle's elevated, OEM side rails. The square, steel crossbars can accommodate a variety of accessories such as bike racks, ski carriers, and cargo baskets.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Features:

This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Rubber strips in T-slots push down to load carriers - no need to trim. Full-length aluminum crossbars maximize carrying capacity. Includes locks.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

Tech Tip:

INXB145 is designated to be the frontmost bar while INXB138 is the rear

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

Tech Tip:

INXB138 is designated to be the frontmost bar while INXB130 is the rear

Features:

Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima accessories. Mounts to your existing roof rack crossbars.

Installation Notes:

Any load/mount extending beyond the rear hatch seam may cause interference