2003 Dodge Grand Caravan Roof Rack

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

This roof rack mounts to your vehicle in seconds with 6 vacuum cups. It's easy to transfer from vehicle to vehicle, and it removes easily for convenient transport and storage. Round, aluminum crossbars carry kayaks, skis, and other gear.

Installation Notes:

This system utilizes 6 vacuum cup attachments to secure itself onto your vehicle's roof

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This roof rack mounts to your vehicle in seconds with 6 vacuum cups. It's easy to transfer from vehicle to vehicle, and the bars fold in half for convenient transport and storage. Round, aluminum crossbars carry kayaks, skis, and other gear.

Installation Notes:

This system utilizes 6 vacuum cup attachments to secure itself onto your vehicle's roof

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Press firmly against the lower portion of the clip while tightening the rack. This will properly locate the clip over the internal raingutter

Boa bike mount does not work due to crossbar spread limitations

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

The aerodynamic Yakima FlushBar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These lockable, aluminum bars mount with a custom fit kit and have built-in slots for accessories.

Installation Notes:

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

The aerodynamic Yakima FlushBar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These lockable, aluminum bars mount with a custom fit kit and have built-in slots for accessories.

Installation Notes:

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Canoes must be 14 feet or less on this application

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side