Trailer Hitch Fits for 2011 Toyota Camry LE

Updated 09/23/2014 | Published 09/22/2014

Products Featured in This Question

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(156)

$64.35

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2634)

$16.89

Question:

Does the 90152 36416 hitch fit a 2011 Camry LE, one exhaust 4 cylinder?

asked by: Helmer

Helpful Expert Reply:

The two 1-1/4-inch Class II trailer hitches you referenced, Hidden Hitch # 90152 (no longer available) and Draw-Tite # 36416, both will fit your 2011 Toyota Camry LE. I verified this with the manufacturer. A video and two helpful articles concerning hitch installation are linked for your reference.

If your intended use is towing, then I suggest the Hidden Hitch # 90152 since a ball mount, pin and clip are included with it. All you'd need to add is a hitch ball and wiring harness. For a 2-inch ball you can use # 19258; for a 1-7/8-inch ball use # 19256. For wiring use # 118482 from TowReady.

If your application is a hitch-mount bike or cargo carrier, then I suggest Draw-Tite hitch # 36416 since you will not need the ball mount. With either of these hitches installed you can select a compatible Class II bike or cargo carrier. A link is provided at right for each product category.
You will need to ensure that the total combined weight of the carrier and its contents does not exceed the hitch or vehicle tongue weight capacity. You can check your owner's manual for any guidance as to the Camry's tongue weight capacity.

expert reply by: Adam R