bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Powered Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118482
lowest price pledge
Our Price: $66.49
You Save: 38%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 1.6 lbs
In Stock
Tekonsha Custom Fit Custom Fit Vehicle Wiring - 118482
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. 1-800-940-8924 to order Tekonsha custom fit vehicle wiring part number 118482 or order online at Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (124)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118482

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Powered Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points in rear cargo area
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
    • Powered module connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 5.6 amps per circuit
  • 1-Year limited warranty


This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.

Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.

It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.

ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.

With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.

118482 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118482 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118482

Average Customer Rating:  4.7 out of 5 stars   (124 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


So about a year ago I bought a reciever hitch, receiver cover,euro style ball and wiring for my 2010 Camry to tow a 4x8 foldable trailer for powersports......Installation was straight forward and dedicated an afternoon for install.....Directions for the products was easy to follow for both products.... so far the wiring is just as I installed it and the hitch is holding up great, you can barely notice that I have a hitch back there. I think it blends in nicely....I anticipate many years of worry free towing....
Customer service is top notch also ????

With the exception of the hitch cover cracking and dry rotting where it pivots, everything else is great.If I had to do it over again I wouldnt change a thing.....Im extremely pleased with the products I purchased from
robert p - 07/03/2021

2018 Mitsubishi Outlander

Easy to install, about 30 minutes from start to finish. Instruction video was easy to follow along with.

2018 Mitsubishi Outlander

Ordered the tenkosha plug and play trailer harness for 2018 outlander with curt hitch .both fit perfect and work well this far ,been about a year . Seem like a good product ,order was easy ,came timely ,and was the right product ,price was good . I call it a win


Installed perfectly and works every time we use it!


The wiring harness was straight forward to install.


My wiring harness has humbly done its work without complaining. A reliable technology


Installing hitch only took 20 minutes
can hook the wiring power to the plug on passenger side. Lift up cup holder cover to access power . You don’t need to run to battery,


I have used this several times and has never let me down yet. Previously i purchased a competitor brand, i towed my trailer 4 times and it stopped working. Ive had this wiring harness for a year or so and its still working. I recomend it to all.

2015 Toyota Venza

Took them a week to get me missing hardware. Couldn't install hitch.

Toyota Camry

The instructions that come with it stink. While accurate, they were a bit like putting IKEA furniture together and I was often unsure if they were talking about the Toyota Camry or what I have, the Mitsubishi Outlander. The plugs were super easy to plug in but horrible to get access to. You basically have to remove a ton of plastic interior body pieces just to get to the stinking thing (on the drivers side). As with most of them, running the 12guage wire to the battery was fun as well. I find it hard to believe there isn't any source of 12volt at the rear of the vehicle that you couldn't tap into. All in all, it works but may be worth paying someone else to install for you unless you have a lift and about 4 hours of time to spare.


Company and Customer service is amazing. Thank you Lori will most definitely order from here again

2012 Toyota Venza

It took us a while to install because we have little background on pulling trim panels off and knowing where to find things. But, we watched the YouTube video and with the instructions we were able to install the wire harness with little to no problem.

Everything is working fine! Thank you!
Amy H - 06/12/2018


I couldn't give it 5 stars because I haven't put the wiring harness on yet, but it sure got here two days. I certainly appreciate that.

Working great. Easy to install, no problems whatsoever.
DON M - 04/02/2018


The item worked OK only once, the first time. I have done some testing. There is continuity from battery to unit. There is continuity from unit's ground to trailer plugin. The lights on the car work fine with the unit's wiring: it gets feed from car controls. The unit is fully sealed so I cannot test continuity from unit to plugin, other than mentioned ground connection. Visually the wires from unit to trailer plugin are fine. I highly suspect the unit itself and not the wiring. I have tried the suggestions online to unplug power to it for some time to no avail. Needless to say, poor rating.


This is my 2nd trailer hitch from e-Trailer. I have a small trailer I use to haul brush, furniture & my recumbent bike. I was very pleased with my first hitch, but after getting a new car, I needed another hitch. The quality products and video instructions make it straight forward to install. My kit required a wire to run from the back of the vehicle to the battery in front. The video outlined the best path to route the wire to avoid hot parts or areas where the wire could be damaged. The connection at the battery included a fuse to prevent a electrical fire if somehow the wire got damaged, like in an accident. When I ordered the 2nd hitch, I received an email letting me know the hitch I selected was no longer available within 3 hours of my order. They suggested another hitch to fit my vehicle. Whenever the need for another hitch arises I know the only place I will go, etrailer.

2011 Toyota Camry

I had an excellent experience with your company. The product came on time, was complete, and the online tutorial was compelety accurate and helpful!

1998 Toyota Camry

This worked great. The only thing that was a little bit of a pain was to run the power wire to the battery. I ran it out under the car attached to brake and feul.line area from trunk to battery. It does work good i have a 98 Camry also that didn't need the power wire but at time I have issue with the 98 blowing tail light fuses. This one works great on the same trailer it is a 2 place snow mobile trailer. This one has side lights also

2014 Toyota Venza

Could not believe how easy it was to in stall


The product I received came promptly and in great condition.However, upon purchasing the products I spoke with a chat specialist who ensured me these two products were everything I needed to tow my pop up.My dad came over and informed me I cannot tow without a ball and reciever which I did not order because I was told I had everything I needed.Luckily he has the products I need.I would just educate the chat agents a little more on the products.Other then complaints .You guys are great.

Toyota Venza

Works well but not particularly easy to install and directions were of little use. I tried to find a place to fish the power lead through the firewall for an hour but gave up and drilled a hole below and to the left of the steering column. Also, the directions for the Venza say to remove the cargo attachments and plastic in the back. It isn't necessary and doesn't actually help... just remove the black trays and the small access panels for the tail lights. You can reach down and disconnect the wiring harness but it helps to pull the harness away from the tab that secures it to the chassis.


Wiring harness fit the vehicle very well. My only suggestion is that a bracket should be shipped with either the wiring harness or the trailer hitch for the external mount of the four-wire connector. The wiring instructions suggest that the four-wire connector be stored in the trunk and extended out of the hatch when using with a trailer. The harness is made to go through the knockout on the driver's side and connect via a bracket on the trailer hitch. The installer just needs to squeeze the four-wire connector to push it through the rubber knockout opening, and then slit the rubber knockout to fit the flat wire of the four-wire connector.

2013 Toyota Venza

Just what I needed made putting trailer lights on my Venza very easy. Have used it many times with no issues.

Mitsubishi Outlander

The wiring kit is complete and installation is foolproof. Once installed it works exactly as it should. If you are installing it in an Outlander PHEV, here are some observations you might find useful:

The battery is in the rear of the vehicle and obstructs your exposure to the driver's side wiring. You might want to consider removing the battery entirely so the trim panel can deflected a bit more.

The tail light wires have very little slack and the connectors are a bit difficult to pull apart. I found it helpful to remove the lens assemblies from each side and access the wires that way. Simply remove the two screws and firmly pull the entire lens straight back until it releases from the plastic "C" connector.

2007 Toyota Camry

This kit made the wiring easy. No question about what went where or how to get it there. I can't wait to get a trailer for my canoe to hook it up. Thanks.

The wiring has worked flawlessly. You have great products.
Don R - 01/18/2015

Thanks for the follow up and reply.

-- Etrailer Expert Rachael H - 1/19/2015

2017 Mitsubishi Outlander

The product itself seems durable and well crafted. The install is mostly straight forward and easy to do however the instructions are not very great. The videos on the website were not helpful for me as they were not my make and model. The greatest difficulty of the install was the running of the wire to the battery and re installing the trim. In my Mitsubishi Outlander I was not able to find a way to run the wire along the outside nor did I want. I ended up running it along the harness but once I got to the dash I could not find a way to get to the engine bay without having to remove the whole dash which I wasn't going to do. After investigating for an hour to find a hidden pathway I just ran the wire out the door and through the quarter panel. Took me about 4 hours to install.

Show More Reviews

Ask the Experts about this Tekonsha Custom Fit Vehicle Wiring

  • Troubleshooting Wiring Harness # 118482 on a 2011 Toyota Venza that Blows Fuses
    The brown wire should not always have current on it. That is the running light circuit and is only supposed to be active when the running lights or head lights are on of your vehicle. It is possible that the converter box is malfunctioning, what you could do is use your circuit tester to test the input side of the converter box to make sure that it is receiving the correct signals and then test the output circuits to see how everything is working. This will tell you if the problem is in...
    view full answer...
  • Tips for Routing a Trailer Wiring Harness Power Wire through the Firewall on a 2010 Toyota Venza
    When going through the firewall, there may be an existing wire bundle going through a grommet that you can use to reach the engine compartment on your 2010 Toyota Venza. If you cannot find a suitable factory location to route the wire, you may find that you will need to drill through the firewall. If you do have to drill, use caution not to drill through any components on the other side. Once you have the wire in the engine compartment, route it over to the vehicle battery. Make sure to...
    view full answer...
  • Installation Process for T-One Harness with ModuLite part # 118482
    The ModuLite box on T-One Harness part # 118482, requires one wire to be ran up to the battery for power. There are no easy-to-access or substantial power sources at the back of most vehicles, so one power wire will have to be run up to the battery. Other than that, the harness is extremely simple to install. The brake, running light, turn and hazard signals are all picked up for snapping connectors in place between the tail lights and the vehicle. The ground wire, white wire with eye...
    view full answer...
  • How to Run the Power Wire for a Trailer Harness up to the Battery on a 2010 Toyota Camry
    If you have access to a jack and jack stands, it may be easiest to run the power wire underneath the car then up into the engine bay. Lift up the carpet covering the trunk well. You should be able to find some black rubber grommets or plugs. Poke a hole or cut a slit in one of these then you can run the wire underneath the car, then up to battery. You can also feed the wire underneath the carpeting and door sill covers and run it up to the firewall, then through into the engine bay. This...
    view full answer...
  • How to Run the Power Wire on a T-Harness Part 118482 for a 2009 Toyota Venza
    You do need to run the wire up front and connect to the battery. There is not a suitable power source at the rear. You can run the wire underneath the carpet and trim moldings up to the firewall then into the engine bay, but this does require removing and re-installing a lot of interior trim pieces. The most conventional way to to this is to run the power wire along the vehicle frame and up into the engine bay. Make sure to avoid hot exhaust components or moving parts that can pinch...
    view full answer...
  • Tips for Routing Trailer Wiring Harness Power Wire on a 2010 Toyota Camry
    The power wire for wiring harness # 118482 on your 2010 Toyota Camry has to be connected to the vehicle battery. Routing the wire from the back of the vehicle to the front isn't all that difficult, just time-consuming. There are different methods you could employ to route the wire. We have had this question often so I wrote a help article with tips on routing the power wire. I have included a link to it for you and a link to a video showing an example installation.
    view full answer...
  • Does Trailer Wiring Harness for 2016 Mitsubishi Outlander Tap into Hatch Opening Mechanism
    The Tekonsha trailer wiring harness part # 118482 that you referenced which is a confirmed fit for your 2016 Mitsubishi Outlander doesn't tie into the rear hatch opening wiring actually. It plugs into the taillight connectors of your vehicle so yours not having the electric hatch opener would not be an issue.
    view full answer...
  • Installation Process for 4-Pole Trailer Wiring Harness 118482 in 2009 Toyota Venza
    Yes, the installation process for wiring harness # 118482 (or either of the other options shown on the linked page) in your 2009 Toyota Venza will be essentially identical to that shown in the video for a 2011 model year. Both are part of the same vehicle generation. A helpful article is linked for you.
    view full answer...
  • Troubleshooting Malfunctioning Running Light Circuit on Trailer
    For starters, check the T-connectors and make sure they are fully plugged in until they click. Secondly, test the 4-pole using a circuit tester like part # 40376. Turn on the vehicle headlights, and test the pin on the 4-pole that is fed by the brown wire. If you get voltage on that pin, you have ruled out the vehicle as being the problem. At this point, you will need to trace the running light circuit on the trailer, which is typically a brown wire. Start at the trailer connector, looking...
    view full answer...
    Image 1 for
  • Power Wire Routing Options When Installing a Wiring Harness # 118482 on a 2009 Lincoln MKS
    There should be other places you could attach the wire from the Custom Fit Vehicle Wiring, part # 118482, underneath your 2009 Lincoln MKS besides the parking brake line. A lot of guys will run the wires through the frame rails or zip-tie the wire to areas that are free from suspension components or hot exhaust parts. If you wanted to find a way to run the wire through your firewall sometimes the holes in the firewall can be difficult to find. A lot of times in the firewall there are holes...
    view full answer...
  • Routing Trailer Wiring Harness # 118482 Power Wire to the Battery on a 2011 Toyota Camry
    When routing the power wire to the battery in trailer wiring harness, # 118482, you will want to avoid any areas that may pinch the wire, causing it to break. Any moving components like the suspension can potentially pinch the wire, so avoid moving parts. You will also want to avoid parts that get hot enough to melt the wire. Exhaust components as an example get very hot and can melt the insulation. However, on the 2011 Toyota Camry, the battery should be in the trunk and you will not...
    view full answer...
  • Connecting the Power Wire for a Trailer Wiring Harness on a 2011 Toyota Venza
    The power wire on the Tow Ready Trailer Wiring Harness, # 118482, for the 2011 Toyota Venza, has only been tested and approved for attachment to the vehicle battery. The wiring harness is rated for the following: Max. stop/turn light: 1 per side (2.1 amps) Max. tail lights: (5.6 amps) I have included a link to the installation details and a link to a video showing a typical installation for you.
    view full answer...
  • 4-Pole Trailer Wiring Harness for 2013 Toyota Venza
    We offer three brands of 4-pole wiring for your car, all shown on the linked page, and the one I suggest based on reliability is the Tekonsha # 118482. An install on a Venza is shown in the linked video. If your Venza's 4-pole trailer harness shows 12V output on all three circuits all the time then the module has failed. The output circuits should have voltage only when the stop/turn/tail light functions are activated on the car.
    view full answer...
  • Trailer Wiring Harness Recommendation for 2015 Mitsubishi Outlander with Tow Package
    The Tekonsha 4-way wiring kit part # 118482 would fit your 2015 Mitsubishi Outlander whether it had the factory tow package or not due to how it installs. This kit basically installs inline with the taillight connectors so it fits vehicles regardless of if you have the tow package or not. The picture I attached shows how it connects at the taillight assembly.
    view full answer...
    Image 1 for
  • Can Power Wires on 4- to 7-Way Adapter and Powered Converter Use Same Power Wire
    You can just use 1 power wire for both the 4- to 7-Way adapter # 30717 and the T-one harness # 118482. You would use the power wire and 40 amp circuit breaker but between that power wire and the converter box on harness # 118482 you would still use the in line yellow fuse holder and fuse. On the adapter be sure to ground the white wire to the frame or the connector will not work.
    view full answer...
  • Losing Power from Tailight Circuit Entering the Converter Box on a 2016 Mitsubishi Outlander
    If you are receiving 13.3 volts on the taillight circuit going into the converter box and only 6.6 volts coming out, then this would indeed indicate a bad converter box. It is not uncommon for converter boxes to fail over time as they are after all, just an electrical component. We have found that over the years, Tekonsha brand wiring products tend to have the greatest longevity and fewest problems. The license plate light you installed should not have had an effect on the converter box...
    view full answer...
  • Will the T-One Harness From a Mitsubishi Outlander Fit a 2013 Dodge Grand Caravan
    The connectors and converter box are both different when comparing the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118534 to the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118482. If the connectors were the only difference then I would say it would be okay to just remove these and then splice the wires into the taillight circuits but since the converter box is different as well it would be best to just obtain the new harness (part #...
    view full answer...
  • Recommended Trailer Hitch for 2019 Mitsubishi Outlander
    For your 2019 Mitsubishi Outlander I highly recommend the Draw-Tite Class III Receiver Hitch # 75888. This custom hitch is going to line right up to existing holes in the Outlander's frame rails for a simple bolt-on (no-drill) installation. The hitch itself will provide you with a 2" receiver and it features a 4,000 pound towing weight capacity along with a 600 tongue weight limit. It's assembled right here in the USA and all the needed hardware is included. I have attached an installation...
    view full answer...
  • Best Trailer Hitch Recommendation for 2020 Mitsubishi Outlander
    The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part # 75888 is a direct fit for your 2020 Outlander as long as it is not the PHEV model. If you're going to need trailer wiring I like the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118482 . It has been custom designed for your 2020 Mitsubishi Outlander and will plug in right behind your taillight housings without any need to cut or splice your factory wiring. Tekonsha is...
    view full answer...
  • Is There a Mounting Spot for the Wiring Harness on a Curt Trailer Hitch Receiver # 13356
    There is a way to store the wiring harness plug for your 2014 Toyota Venza but there is no actual mounting spot on the Curt Trailer Hitch Receiver # 13356. The way demonstrated in the installation video I have attached for the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118482, is to store the wiring under the floor covering inside the hatch. You can then pull out the wiring to connect to your trailer, being sure to stay away from the latch in the center. Using this...
    view full answer...
  • Trailer Wiring Harness Recommendation for a 2014 Mitsubishi Outlander
    We have two trailer wiring harnesses for your 2014 Mitsubishi Outlander available. Essentially they are the same harness made by two different companies. We tend to have better luck with the Tow Ready harnesses so I would recommend the part # 118482 over the Curt # C56189.
    view full answer...
  • Least Visible Trailer Hitch Recommendation for a 2012 Toyota Venza
    I have included a link to the instructions and to a video showing a typical installation of hitch # 75663 so you can see what it would look like when installed. The round tube designs do match the contours of the vehicle better but ultimately on any hitch you will see the cross tube of the hitch at the back of the vehicle. I do recommend the Draw-Tite hitch, # 75663 that you have referenced. It is a popular hitch and the 2 inch receiver is compatible with a lot of accessories. be sure...
    view full answer...
  • Troubleshooting TowReady T-One Vehicle Wiring Harness # 118482 in 2012 Toyota Venza
    The module in the TowReady T-One Vehicle Wiring Harness # 118482 is not user-serviceable, but you can do a few simple tests to narrow down the possible causes for the malfunction. First, check that the trailer connector itself is free of corrosion. Corrosion does not always have to appear severe like rust, but could still cause two circuits to be bridged together; this could cause one light function to interfere with another. If the trailer connector looks okay then you can test the wires...
    view full answer...
  • Installation Hardware, Ball Mount Kit, and Wiring for 2015 Mitsubishi Outlander OEM Trailer Hitch
    It looks like the OEM hitch for your 2015 Mitsubishi Outlander installs differently than the aftermarket hitches, see link to the right. Because of this we will not have a match for all of the parts needed. The hardware should be grade 5 or better. You should be able to get the hardware you need from a Mitsubishi dealer in the parts department. I am also not sure what the convoluted tubing is. But a ball mount I can help with. If you plan on doing some towing you might be interested in...
    view full answer...

< Previous
123. . .5

Do you have a question about this Custom Fit Vehicle Wiring?

  • Why

    At we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Shane H
Test Fit:
Shane H
Employee David F
Test Fit:
David F
Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Lindsey S
Updated by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Kathleen M
Video by:
Kathleen M
Employee Michael B
Video by:
Michael B
Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.