Replacement Hub Assemblies for Demco Kar Kaddy Tow Dolly

Updated 09/10/2014 | Published 09/07/2014

Products Featured in This Question

Replacement Trailer Wheel Bearing - L44649 - Qty 1

(2211)

$24.53

Question:

I have a kar kaddy 11 made by demco. I need bearing/hub assemblies or shop where these pressed bearings can be removed and replaced.

asked by: David F

Expert Reply:

In order to select appropriate replacement hub assemblies you'll just need to match the part numbers or the characteristics of your hubs. You will need to match up your bearing and seal numbers from the original parts if possible, as well as the axle's weight rating (which should be indicted on the axle itself) and the wheel bolt pattern. The linked article shows you how to determine your bolt pattern.

The Demco website shows several models of their Kar Kaddy tow dolly but does not include in the specifications any details about the bearing set used.

The link provided will show you all hub/drum assemblies which you can narrow down using the filters in the margin.

If you cannot obtain the bearing numbers you will need to use a precision digital caliper to measure the spindles at several points in order to select appropriate replacement hubs. The linked photo shows you where to look for the part numbers and also where to measure the spindles. You need to measure to the nearest thousandth of an inch (three decimal points) and then you can use the link provided to choose bearings whose diameters match those dimensions.

expert reply by: Adam R