Dimensions Of Bulldog Sidewind Swivel Jack And Bulldog Caster

Updated 09/05/2014 | Published 09/03/2014

Products Featured in This Question

Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 10" Lift - 2,000 lbs

(230)

$106.09

Replacement 6" Caster Wheel for Bulldog Trailer Jack with 2" Tube Diameter - Qty 1

(80)

$36.34

Question:

Would you please provide more dimensions for the BD154110303 trailer jack such as retracted length. AND Top of jack to mounting tube. AND crank swing radius. also I would also like a dimension for the caster that is used with this jack. I would like the dimension from the floor to face that the jack tube fits against. The caster that fits on the end of the jack, does someone make a caster that swivels? If so what is the part number and also the dimension from the floor to the face that the jack tube fits against. Thaanks again for your help. The place that I want to use this jack is a little bit of a tight fit to get to. Thank you for your help.

asked by: Joel M

Expert Reply:

The Sidewind Swivel Bulldog Jack, part # BD1541150301, you referenced measures 16-3/4 inches from the top of the jack to the bottom of the tube when retracted. From the top of the jack to the center of the mounting tube the distance is 9 inches. From the center of the mounting tube to the ground when fully retracted is 7-3/4 inches and when extended it has an additional 10 inches, bringing that number to 17-3/4 inches. The handle radius is 5-3/4 inches. I have attached a product review video for this jack and also a photo that has the dimensions noted you can check out.

The caster that is designed to fit this jack is part # BD500245. The wheel diameter of this wheel is 6 inches.

expert reply by: Jeffrey L