Trailer Hitch Installation for 2014 Ford Explorer

Updated 09/02/2014 | Published 08/30/2014

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(141)

$201.73

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2639)

$13.10

Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs

(1383)

$84.03

Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector

(2113)

$81.03

Question:

How do I put a hitch on a ford explorer 2014

asked by: Ignacio

Expert Reply:

I recommend the Curt Class III hitch you've already looked at, part # C13386. As you can see in the linked installation instructions and the install video I've also linked to, the installation will be pretty simple, with no drilling required. I've also linked you to some hitch install tips.

If there was a specific portion of the install you're not understanding, please let me know and I'll do my best to help.

If you were planning on towing with your hitch, you might also need the following:

Trailer wiring harness, part # C59236, or part # 118540 for vehicles with the tow package
Ball mount, part # AMSC2
1-7/8 inch trailer ball, part # 19260
2 inch trailer ball, part # 63845
2-5/16 inch ball, part # 63847

The hitch can be installed with ordinary tools, but you will need a torque wrench to get the hardware to the correct level of tightness. You might be able to borrow one from your local auto parts store, or your local mechanic might be able to give the bolts a final torque for a small fee.