Can Shorter Equalizers Be Used on a 2016 Arctic Fox Fifth Wheel?
Updated 11/17/2026 | Published 11/15/2026 >
Products Featured in This Question
Question:
Can you put a shorter equalizer on?
asked by: Bill
Expert Reply:
Hey Bill! Yes, you can sometimes use shorter equalizers, but I recommend staying as close to your original dimensions as possible.
The Dexter # K71-448-00 you're looking at has equalizers measuring 4" tall and 6" wide, compared to the # K71-359-00 you previously ordered, which measures 2" tall and 5-3/4" wide.
Since your front and rear spring hangers stay in the same locations, changing the equalizer height will affect the shackle angles and suspension geometry. The shorter equalizer could work, but you'll want to make sure the shackles maintain the proper orientation and have enough room to move without binding.
It's not necessarily a problem, but I wouldn't guarantee compatibility without checking the suspension geometry. Ideally, you'll want the shackles angled outward toward the axles at approximately 45 degrees with the trailer loaded, forming a W shape. They don't have to be exact, but if the shorter equalizers leave the shackles nearly vertical, angled the wrong way, or unable to move freely, I wouldn't recommend using them.
Do you have the part number of your old equalizer or at least the measurements from it?

Steve H.
11/17/2026
I replaced the factory originals with the 6" x 4" which was the same dimension. They fit perfectly, I had replaced all the leaf springs at the same time and have now run another 4000 miles this summer and all is well. I was skeptical of others, mine is on an Arctic Fox 5th wheel which has an extra heavy frame and suspension so I wanted to mirror the factory. Good choice.
Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Tandem Axle
- Dexter
more information >
Continue Researching
- Search Results: trailer bearings races seals caps
- Search Results: shock
- Video: Low-Down on the EMCO 4-Leaf Double-Eye Spring
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Replacement Trailer Wheel Bearing - JLM506849 - Qty 1
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Lippert Heavy-Duty Replacement Shock - Yellow
- Search Results: trailer suspension parts
- Q&A: What Happens if I Change the Size of Equalizers on 5th Wheel Camping Trailer
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Q&A: Will Longer Equalizer Cause Problems for Trailer Suspension
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler - Round - 30,000 lbs
- Q&A: Can a Trailer Suspension be Blocked to Lower it by 3"
- Q&A: Are Trailer Leaf Spring Shackles Supposed to be Angled or Totally Straight
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Search Results: trailer wiring
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown




Rich M.
11/17/2026
Bill, I would agree with Andrew N's comments. I used the exact same dimensions on my replacement. BTW, these Dexter made in USA are much better than the factory ones I had from China. Also, I like the being able to grease the joints through the bolts. So far the nuts have stayed on the bolts. The factory ones, bolts came off while traveling.