How to Identify Lippert Landing Gear on a 2021 Keystone Sprinter 32BH and Replacement Gears/Legs
Updated 11/16/2026 | Published 11/14/2026 >
Products Featured in This Question
Question:
Hello, I have a broken landing gear leg on my 2021 Keystone Sprinter 32bh, the pin or gear broke inside the leg. I purchased a lippert Tuson motor about a year so I think it’s a lippert landing gear but I’m not sure? Do you know what part I need? Or how I could find which leg would work? Any help would be very much appreciated
asked by: David H
Expert Reply:
Hey there David! I can definitely help you get that landing gear working again on your 2021 Keystone Sprinter 32BH! I'm confident you're working with a Lippert style landing gear system, especially since you've already installed a Lippert Tuson motor but it's still a good idea to verify that.
The easiest way to check is to look for a Lippert or LCI label on the landing gear leg or gearbox. You can also check the top of the leg where the gearbox connects for a part number or manufacturer marking. If you don't find anything, a picture of the gearbox and landing gear leg will help us identify what you've got.
The good news is that if it's just a broken pin or gear inside the leg, you may not need to replace the whole thing if you are up for a DIY project. For Lippert landing gear, we have the Lead Leg Repair Kit # LC146059 for the motor side and the Follow Leg Repair Kit # LC146060 for the opposite side. To be honest, it is easier to replace the whole leg instead of trying to replace the gears.
We also have the Lippert Lead Leg # LC179013 and Follow Leg # LC179014. These have 29-1/2 inch outer tubes, so we'll want to compare that measurement and the mounting configuration with your existing leg before ordering.
Can you tell me whether the broken leg is on the motor side or the opposite side, and are there any stickers on the landing gear that tell us what it is?

David H.
11/16/2026
Thanks Heather, the measurement is 29.5 inches tall and there are no tags or model numbers anywhere on either leg, but it is the lead leg by the motor that needs replaced, also is there a trick to attach pictures? It wouldn’t let me. Sorry if this post goes thru a couple times, was having trouble and seems glitchy
Product Page this Question was Asked From
Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Driver Leg
- Lippert
more information >
Continue Researching
- Q&A: Does Landing Gear Leg LC179013 Attach Directly to Motor
- Q&A: Will Replacement Front Jack for Lippert Ground Control 3.0 System Work On 2021 Open Range 5th Wheel?
- Q&A: What Replacement Lead Leg Do I Need for My 2011 Keystone Montana Trailer?
- Q&A: Replacement Landing Gear Legs Needed for a 2004 Arctic Fox 29.5E 5th Wheel Trailer
- Q&A: Do Lippert Landing Gear Legs # LC179013 and # LC179014 Have Grease Fttings
- Q&A: Replacement Jack Legs for Venture VMC900R Landing Gear
- Q&A: Replacement Front Jack For Ground Control 3.0 on Grand Design 5th Wheel
- Article: What is a Fifth-Wheel Camper
- Article: Can I Put Wallpaper in My RV?
- Article: Best Landing Gear
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)


David H.
11/15/2026
Thanks Heather, the measurement is 29.5 inches tall and there are no tags or model numbers anywhere on either leg, but it is the lead leg by the motor that needs replaced, also is there a trick to attach pictures? It wouldn’t let me