bing tracking image
Q & A Icon

What Leaf Spring do I Need for My Bil-Jax ET4000 Trailer?  

Published 11/05/2026

Question:

Im trying to replace the springs on an old Escalate Biljax trailer. The old part number is B39-00-0032. Is that comparable to UNA-230? I know its 4 leaf instead of 5 leaf. Thanks

0

Expert Reply:

Hello Bill,

Thanks for writing in!

I tried researching the part number you gave me, but the only information I could find was in the original manual. It lists two leaf springs but doesn't provide the specifications for the weight capacity or length. So while I can't give you a definite answer, I can help you figure out what measurements you'll need to make sure you get the right fit.

From the image in the manual, it does appear to be a slipper spring, so you're on the right track with the 4-Leaf Slipper Spring with Hook End for 4,000-lb Trailer Axles - 26-5/8" Long # SP-230275. It's designed for a 4,000-lb axle, so you'll just need to confirm your axle rating and measure your existing spring to make sure it's the correct length.

I've attached an image showing where to take the different measurements. You will want to measure your original spring with all the weight lifted off it. Keep in mind that springs can flatten out over time, so your old spring may measure a little longer than the replacement you need. If your measurements are way different, just comment them below so I can find you the correct one.

Are you the original owner of the trailer, or did you just get it and trying to fix things up?



expert reply by:
0
Kate F
Slipper Spring Measurements
Slipper Spring Measurements
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>