How to Fix My Utility Trailer's Bouncing Problem
Updated 10/30/2026 | Published 10/29/2026 >
Question:
I have a small 5x7 “utility trailer that weighs 600lbs empty, with about 200lbs of gear down low in the trailer and a 200lb tent on top of it, it is currently top heavy and bounces down the road. It’s using a slider leaf spring set up. Max weight will be under 1200lbs. Will this set up work for my trailer and stop the bounce, granted the axle is the correct size?
asked by: Matt B
Expert Reply:
Hey Matt!
I actually think the Timbren Silent Ride Suspension # TSR2000S04 could be a really good upgrade for your little utility trailer!
With your trailer weighing around 1,000 lbs loaded and staying under 1,200 lbs, you're comfortably within the 2,000 lb capacity of this system. Unlike traditional leaf springs, the Timbren uses progressive rubber springs that help absorb bumps and control rebound, which should help reduce some of that bouncing you're experiencing.
One thing I particularly like about this setup is that it doesn't need to be loaded to its full capacity to provide cushioning. That makes it worth considering for lighter trailers like yours, especially when you're carrying camping gear and a rooftop tent.
Now, I do want to point out that the suspension won't necessarily eliminate all the bouncing or correct the trailer being top-heavy. With 200 lbs of tent sitting up high, your center of gravity is raised, so proper tongue weight and tire pressure are going to be important too.
As far as fitment goes, the # TSR2000S04 is designed for a single 1-3/4" diameter round axle. You'll also need to accommodate the required 2" x 2" steel crossmember and mounting brackets when replacing your existing leaf springs.
I'm curious about two things: What size and weight rating are your current leaf springs, and does the trailer bounce mostly when you're hitting bumps, or does it continue bouncing afterward? That'll help me determine whether the suspension is likely the main culprit or whether something else is contributing to the problem.
Product Page this Question was Asked From
Timbren Silent Ride Suspension for Single Axle Trailers w/ 1-3/4" Round Axles - 2,000 lbs
- Trailer Suspension Parts
- Leaf Spring Replacement System
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- Single Axle
- Timbren
more information >
Continue Researching
- Shop: Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Shop: CE Smith 24-5/8" Slipper Leaf Spring - 250 lb Load - 1-3/4" Wide - Single Leaf - Steel
- Search Results: slipper springs ~ 1~3/4 inch trailer suspension parts
- Video: Review of CE Smith Trailer Leaf Springs - Slipper Springs - CES73JR
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Should Leaf Spring Capacity Match Trailer Weight or Axle Weight for Best Ride Comfort
- Q&A: Are Shackles Necessary For A Single Axle Utility Trailer?
- Q&A: What is the Function of the Yellow/Brown Wire on a Trailer
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Wiring
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Shop: Suspension Enhancement
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: How To Choose Camper Leaf Springs
- Shop: Brake Controller
- Search Results: trailer jack
- Shop: Gooseneck Hitch



Matt B.
10/30/2026
Thank you for the reply. The trailer axle is rated for 3,500, but the trailer itself is rated for 1000lbs of weight. The bouncing happens just by driving down the road, it could be the load rating of the tires, I’ll have to check them after work today, but the trailer manufacturer info page is saying load c or d. I’m also looking at the 2k Timbren axle-less set-up. I think the suspension upgrade would be worth it in the long run, but might also have to do something about the tires.