bing tracking image
Q & A Icon

Is the SmartPlug Data Port Inlet SM96MJ a Direct Replacement for a Conntek Inlet?  

Updated 10/27/2026 | Published 10/24/2026

Question:

SmartPlug RV/Marine Data Port Inlet - Blank and Open Port I am looking to replace a Conntek Camp Power on my Airstream. I cant find the dimensions for the Data Port and wondering how closely the dimensions will match those shown in the photo attached. Thanks for your help.

0
Conntek inlet Dimensions
Conntek inlet Dimensions
(click to enlarge)
Conntek inlet
Conntek inlet
(click to enlarge)
Conntek inlet
Conntek inlet
(click to enlarge)

Expert Reply:

Hey Mark, thanks for reaching out! The SmartPlug RV/Marine Data Port Inlet # SM96MJ is virtually identical in size to your existing Conntek inlet, so it'll be a great replacement for your Airstream. The mounting holes on the SmartPlug are spaced exactly 2.4" apart on center, making this a straightforward upgrade without having to make any modifications. This will give you a nice, clean replacement that looks right at home on your Airstream!

Are you replacing the original inlet because it's damaged, or are you just looking to upgrade your setup?

expert reply by:
0
Jesse M
Mark S. profile picture

Mark S.

10/26/2026

Looking to upgrade to power my Starlink Mini and some other device(s). Thanks for your assistance.

Jesse M. profile picture
Etrailer Expert

Jesse M.

10/26/2026

@MarkS Nice! Glad to help! You know where to find me if you ever need anything else!
Doug B. profile picture

Doug B.

10/27/2026

Mark, I connected my Starlink Gen2 using the smart plug but cannot remember what size hole I drilled... maybe 2". However you can take your hole saw and see if it fits over the back of smart plug. Works great for me and I used standard Ethernet cable to connect to my internal 12v power supply. Good luck
Jerry profile picture

Jerry

10/27/2026

@DougB I used a 3/8 bit to drill pilot hole to make sure it was in right spot, then I used a 1 inch paddle wood bit to drill main hole. It was still to smalll so I used a drimmel to bore out so it fits tight, then I sealed with silicone.
See All (4) Replies to Mark S. ∨
Lloyd S. profile picture

Lloyd S.

10/27/2026

Mine was a direct fit replacement. One of the existing coax connectors ran to the TV. The other was installed for a satellite box that I did not have. I abandoned the satellite cable in place. The new connector had one place for Ethernet for Starlink and the other position for the TV coax.

Jesse M. profile picture
Etrailer Expert

Jesse M.

10/27/2026

@LloydS Awesome! Glad to hear the SmartPlug was a direct fit, and that it worked out for you. Thanks for sharing!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>