Replacement 10-36 Grease Seals for Lippert Trailer Axles

Published 10/21/2026

Products Featured in This Question

Lippert Grease Seals - Double Lip - ID 2.25" / OD 3.376" for 5,200-lb to 8,000-lb Axles

(28)

$13.96

Lippert Complete Bearing Kit for 6,000-lb Trailer Axles - 15123/25580 Bearings, 15245/25520 Races

(28)

$30.07

Lippert Complete Bearing Kit for 7,000-lb Trailer Axles - 14125A/25580 Bearings, 14276/25520 Races

(28)

$33.54

Question:

I have Lippert axles on my trailer and was told I need 10-36 grease seals. Do you have a replacement for these?

asked by: Mike

Expert Reply:

Hey Mike! I recommend the Lippert Double-Lip Grease Seals # LC97RP for a replacement. These are the Lippert equivalent to the Dexter 10-36 part number you referenced so it matches the axle. This is a two pack so it will cover replacement for a single axle.

If you're replacing your bearings as well, we also have complete Lippert bearing kits that include the bearings, races, and grease seal needed to service one hub. You can choose from the following based on your axle capacity and existing bearing numbers:

-Lippert Complete Bearing Kit for 6,000-lb Trailer Axles # LC35ZP

-Lippert Complete Bearing Kit for 7,000-lb Trailer Axles # LC95ZP

What kind of trailer are you working on?

expert reply by: Robin H

Lippert Bearing Kit
(click to enlarge)

Lippert Grease Seals
(click to enlarge)

Mike

10/21/2026

Thanks Robin! I'm working on a tandem-axle equipment trailer with 7,000-lb Lippert axles. I'm thinking about replacing the bearings while I have everything apart. Would the 7,000-lb kit you mentioned work for those?

Robin H.

10/21/2026

@Mike the Lippert Bearing Kit # LC95ZP is designed for 7,000 lb axles and comes with # 14125A and # 25580 bearings. Both kits use bearings that fit your spindle, but the outer bearings have a different outer diameter. I recommend checking your existing bearing numbers to make sure you get the correct kit for your hubs.